{"product_id":"31-pc-hurricane-shutter-storm-panel-anchoring-system-kit-10-10","title":"31\/pc Hurricane Shutter Storm Panel Anchoring System Kit (10) 10","description":"\u003ch3\u003e31\/pc Hurricane Shutter Storm Panel Anchoring System Kit (10)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eInstalling Wood Panel to Masonry or Concrete, maximum 5\/8\" plywood Kit does\nnot include a drill bit, because of different installations. Scroll down for\nWood Framing Installation. (1) Pre-Drill 3\/8\" hole in predetermined locations\nin plywood panels. This will facilitate removal of rain-soaked wood panels.\n(2) For best performance in hollow block\/masonry, use a 3\/16\" masonry bit (NOT\nINCLUDED in kit). For solid concrete installation, use a 7\/32\" masonry drill\nbit.(NOT INCLUDED in kit). (3) Position plywood panel over opening and use the\nappropriate drill bit to drill through the clearance holes at the top corners\nof the plywood into the hollow block\/ masonry or concrete. The pilot holes\nshould be 1\/4\" deeper than the anchor bolt that will be used. (4) Use the\nenclosed 3\/16 hex drive socket to install the bolts. The chamfered collar will\nprevent over-driving the anchor bolt. (5) Secure the plywood using the wing\nnuts provided. When top corners are secured, proceed by drilling masonry\/\nconcrete through the remaining 3\/8\" plywood holes and install the remaining\nanchors.  For best results, plywood pilot holes should be placed a minimum of\n2\" from the edge of the masonry\/concrete opening to be protected. Anchors\nshould be a minimum 2\" from edge of the plywood. Anchors should be installed\nat 12\" on center for 5\/8\" plywood. Installing Wood Panel to Wood Framing\nInstructions, maximum 5\/8\" plywood (1) Pre-Drill 3\/8\" hole in predetermined\nlocations in plywood panels. Pre-drill through stucco using a 3\/16\" drill bit\nis recommended. Pre-drilling is not required in the wood framing. (2) Position\npre-drilled plywood panel over framed window opening, Using the enclosed 3\/16\"\nhex drive socket to drive the bolt through the Pre-drilled plywood holes at\nthe top corners of the plywood into the wood framing. (3) Secure the plywood\nusing the wing nuts provided. When top corners are secured, proceed by\ndrilling into wood through the remaining plywood holes and install remaining\nanchors.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003e10 Kit includes 10 anchors, 10 wing nuts, 10 protector caps and 1 driver\u003c\/li\u003e\n         \u003cli\u003e20 Kit includes 20 anchors, 20 wing nuts, 20 protector caps and 1 driver\u003c\/li\u003e\n         \u003cli\u003eInstall instruction and information shown below.\u003c\/li\u003e\n         \u003cli\u003eMade of Carbon Steel w\/ Silver Stalgard Coating\u003c\/li\u003e\n         \u003cli\u003eKeep end caps on at all times while using panels and after using panels. Keep the end caps on at all times while using panels and after using panels.\u003c\/li\u003e\n         \u003cli\u003eThe anchors stay in place with end caps to make future panel mounting faster.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"N C MORIN","offers":[{"title":"Default Title","offer_id":45091920019607,"sku":"B0DDHTFW47","price":154.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0461\/8380\/9175\/files\/B0DDHTFW47.jpg?v=1775758171","url":"https:\/\/newnestshop.com\/products\/31-pc-hurricane-shutter-storm-panel-anchoring-system-kit-10-10","provider":"NewNest Australia","version":"1.0","type":"link"}