{"product_id":"micoair-optical-flow-lidar-sensor-mtf-01-compatible-with-ardupilot-px4-inav-inav","title":"MicoAir OPTICAL FLOW \u0026 LIDAR SENSOR MTF-01 Compatible with Ardupilot\/PX4\/INAV (INAV)","description":"\u003ch3\u003eMicoAir OPTICAL FLOW \u0026amp; LIDAR SENSOR MTF-01 Compatible with Ardupilot\/PX4\/INAV (INAV)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDescription MTF-01 is an optical flow ranging integrated sensor developed by\nMicoAir Technology. It uses uart to output data and is compatible with\nmainstream open source flight controllers such as Ardupilot, PX4, and INAV.\n(You can freely modify the communication protocol between the sensor and the\nflight controller using the USB to UART TTL Module making it compatible with\ndifferent flight controllers.). It can be used directly after simple\nconfiguration without complicated development process. MTF-01 features an\nintegrated PMW3901 optical flow sensor and a high-performance TOF sensor,\nwhich can be used normally in outdoor sunlight environments. About\nProtocolsINAV Version (MSP Protocol)Ardupilot VersionPX4 VersionIf you need to\nchange the communication protocol yourself or make additional settings to the\nsensor (such as changing the installation direction of the sensor on the\ndrone), you will need a USB to TTL module. If you do not have this module, you\ncan purchase it through the following link. This module is already connected\nto the MTF01 dedicated cable and can be directly connected to the sensor.\nLinkIf you are using Ardupilot firmware, you do not need an additional USB to\nTTL module to set up the MTF01 sensor. The specific setting method can be\nfound in the following link (Configure MTF-01 Sensor By Using Ardupilot’s\nSerial Passthrough Function) LinkSpecificationProduct weight: 4.5gProduct\nsize: 29 x 16.5 x 15mmOutput mode: UARTOutput frequency: 100HzTOF Range:\n0.02-8mRanging dead zone: 2cmRange accuracy: 2%Wavelength: 830-870nmResistance\nto ambient light: 70K Lux illuminationDistance FOV: 6°Optical flow FOV:\n42°Ambient light demand of optical flow: \u0026gt;60LuxOptical flow working distance:\n\u0026gt;80mmPower consumption: 500mWOperating voltage: 4.0-5.5VOperating temperature:\n-10°C-60°CUSER MANUAL \u0026amp; ConfiguratorDownload MicoAssistant from\nhereMicoAssistant_v0.9.13Sensor Video TutorialsSetup Optic Flow\u0026amp;Lidar(MTF-01)\nFor INAVSetup Optic Flow\u0026amp;Lidar(MTF-01) For Ardupilot\u0026amp;PX4Sensor 3D fileMTF_01\nOptical Flow Lidar Sensor - GrabCADSensor Case (Designed by ROBOFUSION)MTF-01\nOptical Flow Lidar Sensor Case - GrabCADSensor holder for GEPRC Cinebot30\n(Designed by ROBOFUSION)Sensor holder for GEPRC Cinebot30Sensor holder for\n2inch FPV drone (Designed by ROBOFUSION)Sensor holder for 2inch FPV\ndronePACKAGE LISTMTF-01 module 120cm SH1.0 4PIN-4PIN cable  120cm\nSH1.0-MX1.25-6P cable  1 (for pixhawk2.4.8）20cm SH1.0-GH1.25-6P cable  1\n(for pixhawk4\/5\/6)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eHigh Compatibility: The MTF-01 supports data output via uart, compatible with mainstream open-source flight control systems such as Ardupilot, PX4, and INAV. Users can switch communication protocols through the USB to UART TTL module, adapting to different flight control systems.\u003c\/li\u003e\n         \u003cli\u003eEasy to Operate: Comes with comprehensive video tutorials that simplify the configuration process for quick and easy setup.\u003c\/li\u003e\n         \u003cli\u003eIntegrated High-Performance Sensors: Incorporates a PMW3901 optical flow sensor and a high-power TOF sensor, suitable for outdoor sunlight environments. It offers a ranging distance of 0.02-8m with 2% accuracy and effectively resists up to 70K Lux of ambient light.\u003c\/li\u003e\n         \u003cli\u003eLightweight Design, Strong Environmental Adaptability: Weighing only 4.5g and measuring 29 * 16.5 * 15mm, it supports operating voltages of 4.0-5.5V and working temperatures from -10C to 60C, adaptable to a variety of environments.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":45650249056407,"sku":"B0CQZNNG5C","price":172.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0461\/8380\/9175\/files\/B0CQZNNG5C.jpg?v=1775808826","url":"https:\/\/newnestshop.com\/products\/micoair-optical-flow-lidar-sensor-mtf-01-compatible-with-ardupilot-px4-inav-inav","provider":"NewNest Australia","version":"1.0","type":"link"}