{"product_id":"sparkfun-vr-imu-breakout-bno086-qwiic-combination-triple-axis-accelerometer-gyro-magnetometer-32-bit-m0-board-dimensions-1-0in-x-1-2in-25-4mm-x-30-48mm","title":"SparkFun VR IMU Breakout - BNO086 (Qwiic) Combination Triple-axis Accelerometer\/gyro\/Magnetometer, 32-bit M0+, Board Dimensions: 1.0in. x 1.2in. (25.4mm x 30.48mm)","description":"\u003ch3\u003eSparkFun VR IMU Breakout - BNO086 (Qwiic) Combination Triple-axis Accelerometer\/gyro\/Magnetometer, 32-bit M0+, Board Dimensions: 1.0in. x 1.2in. (25.4mm x 30.48mm)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eVirtual reality is in, but you shouldn't have to drop hundreds of dollars to\ngain access to the technology behind it. Luckily, that's where the SparkFun VR\nIMU Breakout comes in. At its heart is CEVA’s BNO086, a combination triple-\naxis accelerometer\/gyro\/magnetometer System in Package (SiP) with a 32-bit ARM\nCortex M0+. The BNO086 Inertial Measurement Unit (IMU) produces accurate\nrotation vector headings, excellently suited for VR and other heading\napplications, with a two-degree or less static rotation error. The VR IMU is\nexactly what we’ve been waiting for; all the sensor data is combined and\ndrift-corrected into meaningful, accurate IMU information. It’s perfect for\nany project that needs to sense orientation or motion. This IMU breakout board\nhas also been equipped with two I2C Qwiic connectors to make interfacing with\nthe tiny QFN package a bit easier. It’s part of SparkFun’s Qwiic connect\nsystem, so you won’t have to do any soldering to figure out how things are\noriented. However, we still have broken out 0.1\"-spaced pins if you prefer to\nuse a breadboard. The BNO080 was designed to be implemented in Android-based\ncellular phones to handle all the computations necessary for virtual reality\ngoggles using only your phone. With the BNO080 EOL, CEVA offers the drop-in\nreplacement BNO086 with enhanced features (14-bit accelerometer fusion,\nreduced idle state power, and Interactive Calibration). The sensor is quite\npowerful, and with power comes a complex interface. Thanks to the solder\njumpers on the board, you can select between two different I2C addresses.\nStill, if I2C is not your first communication choice, the sensor can\ncommunicate over SPI and UART! We’ve also written an I2C-based library that\nprovides the rotation vector (the reading most folks want from an IMU),\nacceleration, gyro and magnetometer readings, step counting, and activity\nclassifier (such as riding a bike).\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eThe SparkFun VR IMU Breakout is a cutting-edge triple-axis accelerometer\/gyro\/magnetometer in a single package that you can connect via I2C and Qwiic!\u003c\/li\u003e\n         \u003cli\u003eThis IMU breakout board has also been equipped with two I2C Qwiic connectors to make interfacing with the tiny QFN package a bit easier. Its part of SparkFuns Qwiic connect system, so you wont have to do any soldering to figure out how things are oriented.\u003c\/li\u003e\n         \u003cli\u003eVR IMU features: Operating Voltage, 2.4V - 3.6V, Typically 3.3V via Qwiic cable, I2C (Default): Up to 400kHz, SPI: Up to 3MHz, UART: 3Mbps, Rotation Vector, Dynamic Error: 3.5, Static Error: 2.0, Gaming Rotation Vector, Dynamic Error: 2.5\u003c\/li\u003e\n         \u003cli\u003eAlso features: Geomagnetic Rotation Vector, Dynamic Rotation Error: 4.5, Static Rotation Error: 3.0, Gravity Angle Error: 1.5, Linear Acceleration Accuracy: 0.35m\/s2, Accelerometer Accuracy: 0.3m\/s2, Gyroscope Accuracy: 3.1 \/ sec, Magnetometer Accuracy: 1.4T, 2x Qwiic Connection Port and much more!\u003c\/li\u003e\n         \u003cli\u003eThe BNO080 was designed to be implemented in Android-based cellular phones to handle all the computations necessary for virtual reality goggles using only your phone. With the BNO080 EOL, CEVA offers the drop-in replacement BNO086 with enhanced features (14-bit accelerometer fusion, reduced idle state power, and Interactive Calibration).\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":45080525176983,"sku":"B0CG5XXQ5Y","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0461\/8380\/9175\/files\/B0CG5XXQ5Y.jpg?v=1775755111","url":"https:\/\/newnestshop.com\/products\/sparkfun-vr-imu-breakout-bno086-qwiic-combination-triple-axis-accelerometer-gyro-magnetometer-32-bit-m0-board-dimensions-1-0in-x-1-2in-25-4mm-x-30-48mm","provider":"NewNest Australia","version":"1.0","type":"link"}