WayinTop Upgrade Automatic Irrigation DIY Kit Self Watering System for Garden Plant, Development Board + 4pcs Soil Moisture Sensor + 4 Channel Relay + 4pcs Water Pump + 5M Vinyl Tubing + Jumper Wire
WayinTop Upgrade Automatic Irrigation DIY Kit Self Watering System for Garden Plant, Development Board + 4pcs Soil Moisture Sensor + 4 Channel Relay + 4pcs Water Pump + 5M Vinyl Tubing + Jumper Wire
If you have a window garden and are going to be away from home, or you chronically forget to water your plants, the WayinTop's smart watering kit might be a relatively easy high-tech solution. You can simply plant your flower or your herbs in the pot and insert the soil moisture sensor in the soil. Soil moisture sensor senses the moisture level of the soil. If soil will get dry then sensor senses low moisture level and automatically switches on the water pump to supply water to the plant. Specifications: Development Board: Microcontroller: ATmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital IO Pins: 14 (6 PWM outputs) Analog Input Pins: 6 Flash Memory: 32 KB Clock Speed: 16 MHz Capacitive Soil Moisture Sensor: -Operating voltage: 3.3 ~ 5.5 VDC -Output voltage: 0 ~ 3.0 VDC -Interface: PH2.54-3P -Pin: Analog signal output, GND, VCC 4 Channel 5V Relay Module: -VCC: Connect 5V Positive Pole Power Supply -GND: Connect 5V Negative Pole Power Supply Mini Water Pump: -DC Voltage: 3-5 V -Outside diameter of water outlet: 0.29"/7.5mm -Inside diameter of water outlet: 0.17"/4.5mm -Water inlet diameter: 0.19"/5mm Vinyl Tubing: -Material: PVC -I.D. Size: 0.22"/5.54mm -O.D. Size: 0.32"/8.20mm -Length: 39.37"/100cm Package Included: 1 x Development Board 1 x 1.5M Blue USB Cable 4 x Capacitive Soil Moisture Sensor 1 x 4 Channel 5V Relay Module 4 x Mini Water Pump 1 x 5M Vinyl Tubing 1 x 20Pin 20cm M-F Jumper Wire 1 x 20Pin 20cm M-M Jumper Wire 1 x 20Pin 20cm F-F Jumper Wire
Product Features
- Upgraded Automatic Watering SystemCombine development board with USB download cable, water pump, tubing, soil moisture sensor, 4 channel 5V relay module and jumper wires in one plant watering system, including all component for a whole for Arduino DIY drip irrigating system.
- Take Care of Your 4 Plants AnytimeYou can have the system to water your 4 plant automatically. Whenever your soil becomes too dry, the pump is set into motion and water flows up the tube and into the pot. You dont have to worry about your plants while going for vacations.
- R3 Development BoardIt use the same ATmega328 as official for Arduino development board. The ATmega328 on the board comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
- Capacitive SensorInsert it in to the soil around your plants and With a screen and a motherboard, you can talk to your plants. To see if your plants is thirsty, do they need more water to moisten it?
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.