Geekpure Universal Compatible 150 GPD Reverse Osmosis RO Membrane Replacement-NSF Certificated-1.8"X12"
Geekpure Universal Compatible 150 GPD Reverse Osmosis RO Membrane Replacement-NSF Certificated-1.8"X12"
Operation Specification: FEED WATER PRESSURE :35 - 100 PSI TEMPERATE: 40 - 110°F/5-45°C PH :3.0 -11.0 MAX TDS 1000 MG/L TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 Life time :15-24months as your feed water quality Shelf life: 2 years in original sealed package. Note: 1. DO NOT FREEZE. 2. Please keep flush new membrane 30 minutes. Because there is protection material in it. then, TDS of pure water will be down to right level. 3. If you have chlorinated water, we recommend you use a Carbon/Sediment Pre-Filter. The residual chlorine in municipal or city water will destroy the membrane. if hardness is too high, we recommend you install water softener before Ro unit. Why do you choose Reverse Osmosis Filtration? Why Hidrotek brand ? HIGH EFFICIENT FILTRATION HIDROTEK Ro membrane rejects impurities down to 0.0001 micron.High permeated flow and stable salt rejection. Removes up to 98% of contaminants in water (Minimum Rejection 96%). it can remove the particles of heavy metal (primarily fluoride,calcium, magnesium, lead,colloids , chromium and nitrates) and any other 1000+ contaminants from source water. and NSF/ANSI Standard 58 certificated . Universal standard size Standard size ( Membrane Dimensions: 11. 75" Overall Length, 1. 75" Diameter), Fits all Standard 2" ID Membrane housing.HIDROTEK supreme quality water filters are universal industry standard size and fit most residential Reverse Osmosis Systems and water filtration systems. Wastewater ratio is 1:2 NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons waste water will be produced for every gallon pure water. Read more More valuable information: Question: What is dimension of the Ro membrane? Answer: It is standard size ( Membrane Dimensions: 11. 75" Overall Length, 1. 75" Diameter), and Fits all Standard 2" ID Membrane Housings. Question:What is the life time? Answer:Our suggestion is 24 months for most tap water (200-500 ppm).usually, you replace membrane depends on usage amount and feed water quality. if tap water is very good quality (200 ppm or less), you may replace the membrane per 36 months. if hard water area, someone replace membrane 6 months or 12 months. it is time to replace new one if flow rate is too less or membrane is cloged. Question:Could i use it if my water Total Dissolved Solids is over 1000 ppm or very hard well water? Answer: Yes, you can use it. even TDS reach 2000 ppm. but you should replace membrane every 12 months or more frequently .less 1000 ppm is our suggestion. Question:Can this be used for brackish water(5000 ppm) or ocean water with high salinity(35000 ppm)? Answer:No. it is just designed for residential tap water use. if you need Ro membrane for brackish water or ocean water and industrial use, Geekpure can provide too, please send email to us. Question:What is in the box? Answer: Just 1 x 150 GPD RO membrane. if you need membrane housing, wrench and flow restrictor ,please buy it separated. Different temperature,different water pressure and feed water quality, the product water capacity and pure water quality is different. That is reason we feel low pure water capacity in the winter, but higher in the summer. Lab test condition : feed water pressure: 70 psi. work temperature: 77 F or 25 C. Nacl concentration: 250 ppm. recovery: 15%. Read more How to replace Ro membrane? 1.Remove the tube from the fitting and twist off the housing cap with wrench. 2.You should pull out old membrane before step 2 when you replace new membrane.(you may use pliers if necessary.) 3.Push the new membrane into housing. 4.Put the housing cap back and tighten it. and connect concern fitting and tube. Read more Showerhead Filter Membrane Housing 1-5 Stage Ro Replacement Filter Set 1 GPM 6W UV Filter Faucet Water Filter Alkaline Filter Features : 4 Stage Showerhead Filter Removes Hardness,Chlorine, Odors &Add Vitamin C, keep your smooth&rejuvenates skin and hair health,soften your tap water, allowing you to enjoy a more revitalizing shower experience .Dry Skin NO Longer Itchy. Membrane housing for 50 gpd -150 gpd standard 1.8"x12" membrane. if your membrane is not standard, please buy the housing together Universal Compatible standard 10" reverse osmosis replacement cartridges set 6th stage for Ro system,1 GPD UV Filter Advanced 2-Stage Faucet Water Filter for Kitchen and Bathroom Removes Chlorine Taste & Odor, Sediment, Rust Particles ,.clear housing allows you to see when you need to change filters and everything else works as it should 6th stage for Ro system,adjust PH value to 7.5-9 (Ro water is about 5-6)
Product Features
- Capacity:150 Gallons pure water per day, 98% Stabilized Salt Rejection (Minimum Rejection 96%).Dry type TFC Membrane,Maximizing shelf life.the ratio of pure water and waste water is 1:2. Pack of 1.
- High Efficient-150 GPD Ro membrane,Rejects impurities down to 0.0001 micron,Removes Heavy Metal,Arsenic,Lead,Mercury,Fluoride,Cadmium and more 1000+ contaminants from source water
- High Quality - NSF/ANSI Standard 58 certificated.Polyamide film composite material,food grade ,BPA free
- Life Span-It depends on usage amount and feed water quality. Usually,24 months or 35,000 Gallons pure water for most tap water (200-500 ppm)
- Friendly Design,Easy installation. It is suitable for most Reverse Osmosis Water Filtration System.Please note to flush new membrane 30 minutes,DO NOT FREEZE.
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.