Enter NEW5 at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":6663356121239,"title":"Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA","handle":"channellock-338-8-inch-high-leverage-diagonal-cutting-plier-knife-and-anvil-style-cutting-edge-is-laser-heat-treated-for-extended-tool-life-forged-from-high-carbon-steel-made-in-the-usa","description":"\u003ch3\u003eChannellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:8-Inch Channellock 338 8-Inch High Leverage Diagonal\nCutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for\nExtended Tool Life | Forged from High Carbon Steel | Made in the USA\n Not all cutting edges are the same. The 8-inch Channellock 338\nDiagonal Cutting Plier uses precision machined knife and anvil style cutting\nedges to ensure perfect mating and superior cutting edge life. Channellock\nuses high carbon C1080 steel for superior performance on the job, and an\nelectronic coating for ultimate rust prevention. It's completed by\nChannellock's iconic blue handle, which is both comfortable in your hand and\neasy to spot in your tool bag. High leverage cutter with lap joint\ndiagonal(view larger). The 338 can cut piano wire (0.063- to 0.091-inch\nthick), hard wire (0.047- to 0.091-inch), medium hard wire (0.047- to\n0.091-inch), and soft wire (0.162-inch maximum diameter). Channellock utilizes\nprecision-machined knife and anvil style cutting edges to ensure perfect\nmating and superior cutting edge life. While most manufactureres use two sharp\nedges that can become misaligned and lose their cutting effectiveness,\nChannellock's knife and anvil cutters give you proper cutting edge alignment\nfor a clean cut every time. The edge is also laser hardened for unprecedented\nedge life. Specifications Overall length 8 inches Jaw length 0.79-inch Joint\nthickness 0.43-inch Handle span 1.89 inches Joint width 1.18 inches Cutting\nedge 0.79-inch Weight 0.66 pounds About ChannelLock Founded in 1886,\nChannellock is a worldwide leader in the manufacture of high-quality pliers\nand assorted hand tools. Now run by the fifth generation of the DeArment\nfamily, Channellock tools reflect a tradition of dedication to excellence\nmaintained for well over a century. Over the years, Channellock has obtained\nseveral patents including one in 1965 for the conical surface created on the\ncam side of the pliers when undercut and another in 1984 for the PermaLock\nfastener found in its Tongue and Groove Pliers. Channellock still manufactures\nmore than 120 different sizes and types of pliers and hand tools at its\nfacilities in Meadville, Pennsylvania. 338 8-Inch Diagonal Cutting Plier At a\nGlance Cuts piano wire, hard wire, medium hard wire, and soft wire Knife and\nanvil style cutting edge to ensure perfect mating and superior cutting edge\nlife Laser heat-treated cutting edges last longer Constructed of high-carbon\nC1080 steel for superior performance Iconic blue handle is comfortable and\neasy to spot in your tool bag Made in USA Channellock tools are obsessively\ndesigned down to the smallest detail (view larger).\nP.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer This cutter is a perfectly mated cutter, heat treated to hold\nit's edge. The pliers has polished high carbon drop forged steel and the\nChannellock Blue comfort grips. They are 100 % guaranteed against breakage and\nfailure. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCountry of Origin:United States\u003c\/li\u003e\n \u003cli\u003ePackage length:8.2\"\u003c\/li\u003e\n \u003cli\u003ePackage width:2.3\"\u003c\/li\u003e\n \u003cli\u003ePackage height:1.0\"\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-03-30T18:50:52+11:00","created_at":"2021-03-30T18:50:52+11:00","vendor":"Channellock","type":"Side-Cutting Pliers","tags":["nn05"],"price":15900,"price_min":15900,"price_max":15900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39661493551255,"title":"8-Inch","option1":"8-Inch","option2":null,"option3":null,"sku":"B00004SBDD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA - 8-Inch","public_title":"8-Inch","options":["8-Inch"],"price":15900,"weight":363,"compare_at_price":null,"inventory_management":null,"barcode":"060717405642","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00004SBDD.jpg?v=1651201711"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00004SBDD.jpg?v=1651201711","options":["Size"],"media":[{"alt":"Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA - NewNest Australia","id":27763351224471,"position":1,"preview_image":{"aspect_ratio":0.667,"height":2560,"width":1707,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00004SBDD.jpg?v=1651201711"},"aspect_ratio":0.667,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00004SBDD.jpg?v=1651201711","width":1707}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eChannellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:8-Inch Channellock 338 8-Inch High Leverage Diagonal\nCutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for\nExtended Tool Life | Forged from High Carbon Steel | Made in the USA\n Not all cutting edges are the same. The 8-inch Channellock 338\nDiagonal Cutting Plier uses precision machined knife and anvil style cutting\nedges to ensure perfect mating and superior cutting edge life. Channellock\nuses high carbon C1080 steel for superior performance on the job, and an\nelectronic coating for ultimate rust prevention. It's completed by\nChannellock's iconic blue handle, which is both comfortable in your hand and\neasy to spot in your tool bag. High leverage cutter with lap joint\ndiagonal(view larger). The 338 can cut piano wire (0.063- to 0.091-inch\nthick), hard wire (0.047- to 0.091-inch), medium hard wire (0.047- to\n0.091-inch), and soft wire (0.162-inch maximum diameter). Channellock utilizes\nprecision-machined knife and anvil style cutting edges to ensure perfect\nmating and superior cutting edge life. While most manufactureres use two sharp\nedges that can become misaligned and lose their cutting effectiveness,\nChannellock's knife and anvil cutters give you proper cutting edge alignment\nfor a clean cut every time. The edge is also laser hardened for unprecedented\nedge life. Specifications Overall length 8 inches Jaw length 0.79-inch Joint\nthickness 0.43-inch Handle span 1.89 inches Joint width 1.18 inches Cutting\nedge 0.79-inch Weight 0.66 pounds About ChannelLock Founded in 1886,\nChannellock is a worldwide leader in the manufacture of high-quality pliers\nand assorted hand tools. Now run by the fifth generation of the DeArment\nfamily, Channellock tools reflect a tradition of dedication to excellence\nmaintained for well over a century. Over the years, Channellock has obtained\nseveral patents including one in 1965 for the conical surface created on the\ncam side of the pliers when undercut and another in 1984 for the PermaLock\nfastener found in its Tongue and Groove Pliers. Channellock still manufactures\nmore than 120 different sizes and types of pliers and hand tools at its\nfacilities in Meadville, Pennsylvania. 338 8-Inch Diagonal Cutting Plier At a\nGlance Cuts piano wire, hard wire, medium hard wire, and soft wire Knife and\nanvil style cutting edge to ensure perfect mating and superior cutting edge\nlife Laser heat-treated cutting edges last longer Constructed of high-carbon\nC1080 steel for superior performance Iconic blue handle is comfortable and\neasy to spot in your tool bag Made in USA Channellock tools are obsessively\ndesigned down to the smallest detail (view larger).\nP.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer This cutter is a perfectly mated cutter, heat treated to hold\nit's edge. The pliers has polished high carbon drop forged steel and the\nChannellock Blue comfort grips. They are 100 % guaranteed against breakage and\nfailure. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCountry of Origin:United States\u003c\/li\u003e\n \u003cli\u003ePackage length:8.2\"\u003c\/li\u003e\n \u003cli\u003ePackage width:2.3\"\u003c\/li\u003e\n \u003cli\u003ePackage height:1.0\"\u003c\/li\u003e\n \u003c\/ul\u003e"}
  1. Home
  2. Tools & Home Improvement:Power & Hand Tools:Hand Tools:Pliers

Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA

Previous Product | Next Product

In Stock. Leaves warehouse within 2 - 3 business days

$159.00 AUD
Maximum quantity available reached.
Enter NEW5 at Checkout for 5% OFF & Free Shipping Australia Wide
More detailed product descriptions
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA

Size:8-Inch Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA Not all cutting edges are the same. The 8-inch Channellock 338 Diagonal Cutting Plier uses precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. Channellock uses high carbon C1080 steel for superior performance on the job, and an electronic coating for ultimate rust prevention. It's completed by Channellock's iconic blue handle, which is both comfortable in your hand and easy to spot in your tool bag. High leverage cutter with lap joint diagonal(view larger). The 338 can cut piano wire (0.063- to 0.091-inch thick), hard wire (0.047- to 0.091-inch), medium hard wire (0.047- to 0.091-inch), and soft wire (0.162-inch maximum diameter). Channellock utilizes precision-machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. While most manufactureres use two sharp edges that can become misaligned and lose their cutting effectiveness, Channellock's knife and anvil cutters give you proper cutting edge alignment for a clean cut every time. The edge is also laser hardened for unprecedented edge life. Specifications Overall length 8 inches Jaw length 0.79-inch Joint thickness 0.43-inch Handle span 1.89 inches Joint width 1.18 inches Cutting edge 0.79-inch Weight 0.66 pounds About ChannelLock Founded in 1886, Channellock is a worldwide leader in the manufacture of high-quality pliers and assorted hand tools. Now run by the fifth generation of the DeArment family, Channellock tools reflect a tradition of dedication to excellence maintained for well over a century. Over the years, Channellock has obtained several patents including one in 1965 for the conical surface created on the cam side of the pliers when undercut and another in 1984 for the PermaLock fastener found in its Tongue and Groove Pliers. Channellock still manufactures more than 120 different sizes and types of pliers and hand tools at its facilities in Meadville, Pennsylvania. 338 8-Inch Diagonal Cutting Plier At a Glance Cuts piano wire, hard wire, medium hard wire, and soft wire Knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life Laser heat-treated cutting edges last longer Constructed of high-carbon C1080 steel for superior performance Iconic blue handle is comfortable and easy to spot in your tool bag Made in USA Channellock tools are obsessively designed down to the smallest detail (view larger). P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer This cutter is a perfectly mated cutter, heat treated to hold it's edge. The pliers has polished high carbon drop forged steel and the Channellock Blue comfort grips. They are 100 % guaranteed against breakage and failure. See more

Product Features

  • Country of Origin:United States
  • Package length:8.2"
  • Package width:2.3"
  • Package height:1.0"

Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).

This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.

You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.

Related Products