Enter NEW5 at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":6673237409943,"title":"Dripless Inc. ETS2000 Ergo Composite Caulk Gun 10-Ounce","handle":"dripless-inc-ets2000-ergo-composite-caulk-gun-10-ounce","description":"\u003ch3\u003eDripless Inc. ETS2000 Ergo Composite Caulk Gun\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize Name:10-Ounce The Dripless ETS2000 Industrial Grade\ncaulking gun has a lightweight composite revolving frame that fits 10 oz.\ncartridges and has a 12:1 thrust ratio for use with latex, acrylic, and\nsilicone. The revolving frame allows the barrel to rotate for maintaining the\nsame bead orientation when caulking around corners. A spout cutter is built\ninto the side of gun for opening cartridges without a knife, and the hook on\nthe back allows it to hang on a ladder.Caulking guns, also called caulk or\ncartridge guns, dispense a controlled flow of products such as caulk,\nsealants, and adhesives from a tube or cartridge. A manual caulking gun\nconsists of a frame which holds the tube, a trigger, and a rod which moves\nforward when the trigger is depressed, dispensing the product. Manual caulking\nguns have a thrust ratio; the higher the thrust ratio, the easier it is to\ndispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking\nguns also have a frame and a trigger, but are used with an air pressure\nregulator that pushes the product from the tube using air pressure instead of\na rod.Dripless, Inc. manufactures caulking guns and caulking and painting\naccessories. The company, founded in 1992, is headquartered in Santa Rosa, CA.\nFrom the Manufacturer This contractor ergo composite caulk gun is engineered\nto provide superior performance due to its many enhanced features including a\nprecision cutter with a viewing port to check the angle of the cut, an extra-\nlong clean out rod that snaps in place when not in use and a rotating barrel\nfor corners and hard-to-reach places. Reduces stress in hand and arm. The\nrugged composite construction weighs up to 40-percent less than other models.\n12:1 ratio is recommended for acrylics, silicones, elastomeric, or latex. The\nironic grip has been designed to keep the wrist in a natural and balanced\nposition. Available in 10-ounce cartridge.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eLightweight composite frame caulking gun for 10 oz. cartridges\u003c\/li\u003e\n \u003cli\u003eThrust ratio of 12:1 for use with latex, acrylic, and silicone\u003c\/li\u003e\n \u003cli\u003eRevolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners\u003c\/li\u003e\n \u003cli\u003eSpout cutter built into side for opening cartridges without a knife\u003c\/li\u003e\n \u003cli\u003eHook on the back for hanging it on a ladder\u003c\/li\u003e\n \u003cli\u003eContractor heavy duty ergo composite caulk gun provides superior performance\u003c\/li\u003e\n \u003cli\u003eEngineered ergonomic grip to keep the wrist in a natural and balanced position\u003c\/li\u003e\n \u003cli\u003eRugged composite construction weighs up to 40-Percent less than other models\u003c\/li\u003e\n \u003cli\u003eExtra long clean-out rod that snaps in place when not in use; rotating barrel for corners\u003c\/li\u003e\n \u003cli\u003eRecommended for acrylics, silicones, elastomeric or latex; available in 10-ounce cartridge\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-01T23:23:24+11:00","created_at":"2021-04-01T23:23:24+11:00","vendor":"Dripless Inc.","type":"Caulking Guns","tags":["nn05"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39683036840087,"title":"10-Ounce","option1":"10-Ounce","option2":null,"option3":null,"sku":"B0002CKG1O","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dripless Inc. ETS2000 Ergo Composite Caulk Gun 10-Ounce - 10-Ounce","public_title":"10-Ounce","options":["10-Ounce"],"price":14200,"weight":508,"compare_at_price":null,"inventory_management":null,"barcode":"764509010020","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0002CKG1O.jpg?v=1651211832"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002CKG1O.jpg?v=1651211832","options":["Size Name"],"media":[{"alt":"Dripless Inc. ETS2000 Ergo Composite Caulk Gun 10-Ounce - NewNest Australia","id":27765350367383,"position":1,"preview_image":{"aspect_ratio":1.675,"height":764,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002CKG1O.jpg?v=1651211832"},"aspect_ratio":1.675,"height":764,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002CKG1O.jpg?v=1651211832","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDripless Inc. ETS2000 Ergo Composite Caulk Gun\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize Name:10-Ounce The Dripless ETS2000 Industrial Grade\ncaulking gun has a lightweight composite revolving frame that fits 10 oz.\ncartridges and has a 12:1 thrust ratio for use with latex, acrylic, and\nsilicone. The revolving frame allows the barrel to rotate for maintaining the\nsame bead orientation when caulking around corners. A spout cutter is built\ninto the side of gun for opening cartridges without a knife, and the hook on\nthe back allows it to hang on a ladder.Caulking guns, also called caulk or\ncartridge guns, dispense a controlled flow of products such as caulk,\nsealants, and adhesives from a tube or cartridge. A manual caulking gun\nconsists of a frame which holds the tube, a trigger, and a rod which moves\nforward when the trigger is depressed, dispensing the product. Manual caulking\nguns have a thrust ratio; the higher the thrust ratio, the easier it is to\ndispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking\nguns also have a frame and a trigger, but are used with an air pressure\nregulator that pushes the product from the tube using air pressure instead of\na rod.Dripless, Inc. manufactures caulking guns and caulking and painting\naccessories. The company, founded in 1992, is headquartered in Santa Rosa, CA.\nFrom the Manufacturer This contractor ergo composite caulk gun is engineered\nto provide superior performance due to its many enhanced features including a\nprecision cutter with a viewing port to check the angle of the cut, an extra-\nlong clean out rod that snaps in place when not in use and a rotating barrel\nfor corners and hard-to-reach places. Reduces stress in hand and arm. The\nrugged composite construction weighs up to 40-percent less than other models.\n12:1 ratio is recommended for acrylics, silicones, elastomeric, or latex. The\nironic grip has been designed to keep the wrist in a natural and balanced\nposition. Available in 10-ounce cartridge.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eLightweight composite frame caulking gun for 10 oz. cartridges\u003c\/li\u003e\n \u003cli\u003eThrust ratio of 12:1 for use with latex, acrylic, and silicone\u003c\/li\u003e\n \u003cli\u003eRevolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners\u003c\/li\u003e\n \u003cli\u003eSpout cutter built into side for opening cartridges without a knife\u003c\/li\u003e\n \u003cli\u003eHook on the back for hanging it on a ladder\u003c\/li\u003e\n \u003cli\u003eContractor heavy duty ergo composite caulk gun provides superior performance\u003c\/li\u003e\n \u003cli\u003eEngineered ergonomic grip to keep the wrist in a natural and balanced position\u003c\/li\u003e\n \u003cli\u003eRugged composite construction weighs up to 40-Percent less than other models\u003c\/li\u003e\n \u003cli\u003eExtra long clean-out rod that snaps in place when not in use; rotating barrel for corners\u003c\/li\u003e\n \u003cli\u003eRecommended for acrylics, silicones, elastomeric or latex; available in 10-ounce cartridge\u003c\/li\u003e\n \u003c\/ul\u003e"}
  1. Home
  2. Tools & Home Improvement:Power & Hand Tools:Hand Tools

Dripless Inc. ETS2000 Ergo Composite Caulk Gun 10-Ounce

Previous Product | Next Product

In Stock. Leaves warehouse within 2 - 3 business days

$142.00 AUD
Maximum quantity available reached.
Enter NEW5 at Checkout for 5% OFF & Free Shipping Australia Wide
More detailed product descriptions
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Dripless Inc. ETS2000 Ergo Composite Caulk Gun

Size Name:10-Ounce The Dripless ETS2000 Industrial Grade caulking gun has a lightweight composite revolving frame that fits 10 oz. cartridges and has a 12:1 thrust ratio for use with latex, acrylic, and silicone. The revolving frame allows the barrel to rotate for maintaining the same bead orientation when caulking around corners. A spout cutter is built into the side of gun for opening cartridges without a knife, and the hook on the back allows it to hang on a ladder.Caulking guns, also called caulk or cartridge guns, dispense a controlled flow of products such as caulk, sealants, and adhesives from a tube or cartridge. A manual caulking gun consists of a frame which holds the tube, a trigger, and a rod which moves forward when the trigger is depressed, dispensing the product. Manual caulking guns have a thrust ratio; the higher the thrust ratio, the easier it is to dispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking guns also have a frame and a trigger, but are used with an air pressure regulator that pushes the product from the tube using air pressure instead of a rod.Dripless, Inc. manufactures caulking guns and caulking and painting accessories. The company, founded in 1992, is headquartered in Santa Rosa, CA. From the Manufacturer This contractor ergo composite caulk gun is engineered to provide superior performance due to its many enhanced features including a precision cutter with a viewing port to check the angle of the cut, an extra- long clean out rod that snaps in place when not in use and a rotating barrel for corners and hard-to-reach places. Reduces stress in hand and arm. The rugged composite construction weighs up to 40-percent less than other models. 12:1 ratio is recommended for acrylics, silicones, elastomeric, or latex. The ironic grip has been designed to keep the wrist in a natural and balanced position. Available in 10-ounce cartridge.

Product Features

  • Lightweight composite frame caulking gun for 10 oz. cartridges
  • Thrust ratio of 12:1 for use with latex, acrylic, and silicone
  • Revolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners
  • Spout cutter built into side for opening cartridges without a knife
  • Hook on the back for hanging it on a ladder
  • Contractor heavy duty ergo composite caulk gun provides superior performance
  • Engineered ergonomic grip to keep the wrist in a natural and balanced position
  • Rugged composite construction weighs up to 40-Percent less than other models
  • Extra long clean-out rod that snaps in place when not in use; rotating barrel for corners
  • Recommended for acrylics, silicones, elastomeric or latex; available in 10-ounce cartridge

Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).

This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.

You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.

Related Products