{"id":6685607821463,"title":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic","handle":"2-pack-urethane-band-saw-tires-fits-9-inch-x-1-2-x-095-no-adhesive-needed-compatible-with-branded-bandsaws-including-jet-grizzly-powermatic","description":"\u003ch3\u003e2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese Urethane band saw tires are designed to fit any machine that requires a\n1\/2 inch by0.095 inch by 9 inch bandsaw tire.Black \u0026amp; Decker: BDBS100, BS700\nCraftsman: 137.21409, 113.24458, 315.214770, 315-214590 Delta: 28-150, BS100,\nSM400 Grizzly:G1052 ProTech: 3203 Ryobi: BS 101, BS901Shopfox: W1749, W1750,\nT20837. Fits certain models of Tradesman, Skil and Delta as well! This isn’t\nan exhaustive list. This is notan exhaustive list and is meant for Band Saw\nthat requires a ½” wide by 3\/32” thick tire. There’s no need to use adhesive\nwith these as the Urethane material stretches to fit the wheel.This makes for\neasier installation and removal. We suggest soaking in hot water\nbeforeinstallation to make material more pliable. Urethane is known to outlast\nthe factory tires, or the replacement plastic or rubber tires. It doesn’t dry\nout which extends its life.How to Install Your Urethane Band Saw Tires Make\nsure to unplug your band saw while changing any parts or servicing it.Urethane\nband saw tires don’t require adhesive, but they do need to be stretched\non.Remove the old tires, and clean the machine of any dirt, debris, or\nadhesive.The smaller tires can be fitted by stretching them on by hand.If you\ncan’t get the tires on by hand stretching them, clamp the tires to the wheel.\nWork the tire around the wheel inboth directions and add clamps as you go.A\ndowel rod or smooth tool can be used to pry the tire on.Once the tire is\nsecurely on the wheel, the stretch will need to be smoothed out.With a dowel\nbetween the tire and the wheel, roll it around the entire wheel.More detailed\nversions of instructions can be found by searching for “urethane bandsaw tire\ninstallation” online.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eLong Life: These Band Saw Tires are superior to factory tires, or replacement rubber or plastic tires. This value 2 pack provides excellent value and quality.\u003c\/li\u003e\n \u003cli\u003eDoesn't Dry Out: Urethane doesn't dry out when compared to plastic or rubber tires. This increases their efficiency and life expectancy.\u003c\/li\u003e\n \u003cli\u003eNo Adhesives Needed: Easy to install \u0026amp; remove with no need for adhesive. The tires stretch to fit the wheel tightly. We recommend soaking the tire in hot water before installation. It makes things...easier.\u003c\/li\u003e\n \u003cli\u003eWide Range Of Compatibility: Compatible with Band Saws that require a 9 x 1\/2 x .095 tire. Fits many including Black \u0026amp; Decker: BDBS100, BS700 Craftsman: 137.21409, 113.24458, 315.214770, 315-214590 Delta: 28-150, BS100, SM400 Grizzly: G1052 ProTech: 3203 Ryobi: BS 101, BS901 Shopfox: W1749, W1750, T20837. Fits certain models of Tradesman, Skil and Delta as well!\u003c\/li\u003e\n \u003cli\u003eDoes Not Fit: Models with a grooved wheel. This is a flat tire. This is an aftermarket product manufactured by Impresa Products. Any other brands mentioned are for illustrative purposes only and are in no way affiliated with Impresa Products, nor do they endorse Impresa Products.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:26:23+10:00","created_at":"2021-04-04T17:26:23+10:00","vendor":"IMPRESA","type":"Band Saw Accessories","tags":["nn05"],"price":13000,"price_min":13000,"price_max":13000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709696688279,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B085F2WCQL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic","public_title":null,"options":["Default Title"],"price":13000,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B085F2WCQL.jpg?v=1651219183","\/\/newnestshop.com\/cdn\/shop\/products\/619ssWdJiqL.jpg?v=1622429933","\/\/newnestshop.com\/cdn\/shop\/products\/61B-5trEjBL.jpg?v=1622429933","\/\/newnestshop.com\/cdn\/shop\/products\/615H7irOkXL.jpg?v=1622429933","\/\/newnestshop.com\/cdn\/shop\/products\/619lxNDb_2B1L.jpg?v=1622429933","\/\/newnestshop.com\/cdn\/shop\/products\/71HO4c5nw-L.jpg?v=1622429933"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B085F2WCQL.jpg?v=1651219183","options":["Title"],"media":[{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":27767095885975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B085F2WCQL.jpg?v=1651219183"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B085F2WCQL.jpg?v=1651219183","width":1500},{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":21239675814039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/619ssWdJiqL.jpg?v=1622429933"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/619ssWdJiqL.jpg?v=1622429933","width":1500},{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":21239675846807,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61B-5trEjBL.jpg?v=1622429933"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61B-5trEjBL.jpg?v=1622429933","width":1500},{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":21239675879575,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/615H7irOkXL.jpg?v=1622429933"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/615H7irOkXL.jpg?v=1622429933","width":1500},{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":21239675912343,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/619lxNDb_2B1L.jpg?v=1622429933"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/619lxNDb_2B1L.jpg?v=1622429933","width":1500},{"alt":"2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic - NewNest Australia","id":21239675945111,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HO4c5nw-L.jpg?v=1622429933"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HO4c5nw-L.jpg?v=1622429933","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e2 Pack Urethane Band Saw Tires - Fits 9 inch x 1\/2 x .095 - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese Urethane band saw tires are designed to fit any machine that requires a\n1\/2 inch by0.095 inch by 9 inch bandsaw tire.Black \u0026amp; Decker: BDBS100, BS700\nCraftsman: 137.21409, 113.24458, 315.214770, 315-214590 Delta: 28-150, BS100,\nSM400 Grizzly:G1052 ProTech: 3203 Ryobi: BS 101, BS901Shopfox: W1749, W1750,\nT20837. Fits certain models of Tradesman, Skil and Delta as well! This isn’t\nan exhaustive list. This is notan exhaustive list and is meant for Band Saw\nthat requires a ½” wide by 3\/32” thick tire. There’s no need to use adhesive\nwith these as the Urethane material stretches to fit the wheel.This makes for\neasier installation and removal. We suggest soaking in hot water\nbeforeinstallation to make material more pliable. Urethane is known to outlast\nthe factory tires, or the replacement plastic or rubber tires. It doesn’t dry\nout which extends its life.How to Install Your Urethane Band Saw Tires Make\nsure to unplug your band saw while changing any parts or servicing it.Urethane\nband saw tires don’t require adhesive, but they do need to be stretched\non.Remove the old tires, and clean the machine of any dirt, debris, or\nadhesive.The smaller tires can be fitted by stretching them on by hand.If you\ncan’t get the tires on by hand stretching them, clamp the tires to the wheel.\nWork the tire around the wheel inboth directions and add clamps as you go.A\ndowel rod or smooth tool can be used to pry the tire on.Once the tire is\nsecurely on the wheel, the stretch will need to be smoothed out.With a dowel\nbetween the tire and the wheel, roll it around the entire wheel.More detailed\nversions of instructions can be found by searching for “urethane bandsaw tire\ninstallation” online.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eLong Life: These Band Saw Tires are superior to factory tires, or replacement rubber or plastic tires. This value 2 pack provides excellent value and quality.\u003c\/li\u003e\n \u003cli\u003eDoesn't Dry Out: Urethane doesn't dry out when compared to plastic or rubber tires. This increases their efficiency and life expectancy.\u003c\/li\u003e\n \u003cli\u003eNo Adhesives Needed: Easy to install \u0026amp; remove with no need for adhesive. The tires stretch to fit the wheel tightly. We recommend soaking the tire in hot water before installation. It makes things...easier.\u003c\/li\u003e\n \u003cli\u003eWide Range Of Compatibility: Compatible with Band Saws that require a 9 x 1\/2 x .095 tire. Fits many including Black \u0026amp; Decker: BDBS100, BS700 Craftsman: 137.21409, 113.24458, 315.214770, 315-214590 Delta: 28-150, BS100, SM400 Grizzly: G1052 ProTech: 3203 Ryobi: BS 101, BS901 Shopfox: W1749, W1750, T20837. Fits certain models of Tradesman, Skil and Delta as well!\u003c\/li\u003e\n \u003cli\u003eDoes Not Fit: Models with a grooved wheel. This is a flat tire. This is an aftermarket product manufactured by Impresa Products. Any other brands mentioned are for illustrative purposes only and are in no way affiliated with Impresa Products, nor do they endorse Impresa Products.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696869003415,"title":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers","handle":"hqrp-dust-collector-bag-compatible-with-dewalt-dw745-dw744-dw744x-dwe7491rs-dwe7480-745-744-744x-7480-7491-10-inch-tablesaws-planers","description":"\u003ch3\u003eHQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHQRP Dust Collector Bag can be used with table saws that have 2-1\/2 inch dust\nports on the exterior of the saw. Compatible with Bosch part TS1004 Dust Bag.\nWorks with Bosch 4000, 4100, GTS1031, GTS1041A Table Saws. Compatible with\nDeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491\n10-inch Tablesaws \/ Planers, etc. It collects up to 70% of the generated saw\ndust. Easy to install. Easy to empty. Includes wire frame for attaching bag to\ntable saw's dust port and for support of top seam of bag. Crafted out of heavy\ncloth material with sturdy zipper for trouble free emptying. Dimensions: L 29\"\nx W 13\" head side x W 9\" end side, diameter of ring 2.5\" up to 2 7\/8\".This is\nnot an Original Equipment Manufacturer (OEM) product, HQRP branded product is\na replacement. All brand names and logos are registered trademarks of their\nrespective owners. Any use of the brand names or model designations for this\nproduct are made solely for purposes of demonstrating compatibility.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHQRP Dust Collector Bag with Wire Support Frame;\u003c\/li\u003e\n \u003cli\u003eHelps keep work area cleaner; Collects up to 70% of dust and particles;\u003c\/li\u003e\n \u003cli\u003eCompatible with Bosch part TS1004; Easy to attach and detach to your tablesaw;\u003c\/li\u003e\n \u003cli\u003eDimensions: L 29\" x W 13\" head side x W 9\" end side, D of ring 2.5\" up to 2 7\/8\";\u003c\/li\u003e\n \u003cli\u003eCan be used with other table saws that have 2-1\/2 inch dust ports on the exterior of the saw.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:20:34+10:00","created_at":"2021-04-07T23:20:34+10:00","vendor":"HQRP","type":"Table Saw Accessories","tags":["nn05"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735869898903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07D918LL3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers","public_title":null,"options":["Default Title"],"price":14500,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"804","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07D918LL3.jpg?v=1651234471","\/\/newnestshop.com\/cdn\/shop\/products\/71dxRLcbK6L.jpg?v=1622445052","\/\/newnestshop.com\/cdn\/shop\/products\/615hWjU-w1L.jpg?v=1622445052","\/\/newnestshop.com\/cdn\/shop\/products\/61aoVP7BQZL.jpg?v=1622445052","\/\/newnestshop.com\/cdn\/shop\/products\/61Br0zkb82L.jpg?v=1622445052","\/\/newnestshop.com\/cdn\/shop\/products\/91m0bvS5X9L.jpg?v=1622445052","\/\/newnestshop.com\/cdn\/shop\/products\/81BOYlciqOL.jpg?v=1622445052"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07D918LL3.jpg?v=1651234471","options":["Title"],"media":[{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":27770312294551,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07D918LL3.jpg?v=1651234471"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07D918LL3.jpg?v=1651234471","width":2560},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639314071,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71dxRLcbK6L.jpg?v=1622445052"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71dxRLcbK6L.jpg?v=1622445052","width":1500},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639346839,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/615hWjU-w1L.jpg?v=1622445052"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/615hWjU-w1L.jpg?v=1622445052","width":1500},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639379607,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1458,"width":1458,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61aoVP7BQZL.jpg?v=1622445052"},"aspect_ratio":1.0,"height":1458,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61aoVP7BQZL.jpg?v=1622445052","width":1458},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639412375,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Br0zkb82L.jpg?v=1622445052"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Br0zkb82L.jpg?v=1622445052","width":1500},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639445143,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91m0bvS5X9L.jpg?v=1622445052"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91m0bvS5X9L.jpg?v=1622445052","width":2560},{"alt":"HQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers - NewNest Australia","id":21308639477911,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81BOYlciqOL.jpg?v=1622445052"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81BOYlciqOL.jpg?v=1622445052","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHQRP Dust Collector Bag compatible with DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws\/Planers\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHQRP Dust Collector Bag can be used with table saws that have 2-1\/2 inch dust\nports on the exterior of the saw. Compatible with Bosch part TS1004 Dust Bag.\nWorks with Bosch 4000, 4100, GTS1031, GTS1041A Table Saws. Compatible with\nDeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491\n10-inch Tablesaws \/ Planers, etc. It collects up to 70% of the generated saw\ndust. Easy to install. Easy to empty. Includes wire frame for attaching bag to\ntable saw's dust port and for support of top seam of bag. Crafted out of heavy\ncloth material with sturdy zipper for trouble free emptying. Dimensions: L 29\"\nx W 13\" head side x W 9\" end side, diameter of ring 2.5\" up to 2 7\/8\".This is\nnot an Original Equipment Manufacturer (OEM) product, HQRP branded product is\na replacement. All brand names and logos are registered trademarks of their\nrespective owners. Any use of the brand names or model designations for this\nproduct are made solely for purposes of demonstrating compatibility.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHQRP Dust Collector Bag with Wire Support Frame;\u003c\/li\u003e\n \u003cli\u003eHelps keep work area cleaner; Collects up to 70% of dust and particles;\u003c\/li\u003e\n \u003cli\u003eCompatible with Bosch part TS1004; Easy to attach and detach to your tablesaw;\u003c\/li\u003e\n \u003cli\u003eDimensions: L 29\" x W 13\" head side x W 9\" end side, D of ring 2.5\" up to 2 7\/8\";\u003c\/li\u003e\n \u003cli\u003eCan be used with other table saws that have 2-1\/2 inch dust ports on the exterior of the saw.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696836202647,"title":"Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V","handle":"table-saw-switch-compatible-with-ryobi-089110109712-replacement-parts-compatible-with-ryobi-10-inch-table-saw-power-tool-switch-120v-250v","description":"\u003ch3\u003eTable Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA switch handles all on\/off and variable speed functions. They also have a\nrole in electric breaking; they can momentarily reverse electrical polarity.\nIf your table saw is showing any of these symptoms; replacing the switch could\nsolve your problem: 1) Saw won’t turn on when switch is activated 2) Saw dies\nintermittently This part is compatible with the following machines: Compatible\nwith Ryobi BS1001SV 10\" Band Saw BS902 9\" Band Saw BS903 9\" Band Saw BTS15 10\"\nTable Saw BTS20 10\" Portable Table Saw BTS20R 10\" Table Saw BTS20R-1 10\" Table\nSaw BTS21 10\" Table Saw DP120 12\" Drill Press OSS500 Osclillating Spindle\nSander BTS16 10\" Table Saw RTS30 10\" Portable Table Saw RTS20 Portable Table\nSaw with Quick Stand RTS10 10\" Table Saw BTS211 10\" Table Saw RTS21 10 in.\nTable Saw RTS21G RTS21G 10-In. Table Saw\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTABLE SAW SWITCH: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. Note,it's not created or sold by Ryobi.\u003c\/li\u003e\n \u003cli\u003eVOLTAGE: Emergency stop switch replaces part #: 16102010G, ,452080007 , 984407003 and 984406001. Rated current: 20 Amps at 125V, 12 Amps at 250V.\u003c\/li\u003e\n \u003cli\u003ePREMIUM QUALITY: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.\u003c\/li\u003e\n \u003cli\u003eCOMPATIBLE WITH: Table saw switch is compatible with Ryobi BS1001SV 10\" Band Saw, BS902 9\" Band Saw, BS903 9\" Band Saw,BTS15 10\" Table Saw, BTS20 10\" Portable Table Saw, BTS20R 10\" Table Saw, BTS20R-1 10\" Table Saw, BTS21 10\" Table Saw\u003c\/li\u003e\n \u003cli\u003eCOMPATIBLE WITH: Compatible with DP120 12\" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10\" Table Saw, RTS30 10\" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10\" Table Saw, BTS211 10\" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:12:35+10:00","created_at":"2021-04-07T23:12:35+10:00","vendor":"wadoy","type":"Table Saw Accessories","tags":["nn05"],"price":9500,"price_min":9500,"price_max":9500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735805444247,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07R38JVJZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V","public_title":null,"options":["Default Title"],"price":9500,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"741416721683","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07R38JVJZ.jpg?v=1651233948","\/\/newnestshop.com\/cdn\/shop\/products\/71vuPBgwyyL_3a3962c1-14e5-49a4-9e13-4e0acc08cf4b.jpg?v=1622444543","\/\/newnestshop.com\/cdn\/shop\/products\/71ti6ReA6mL_f3640c49-8e6c-4856-bf96-1e13b827bfb6.jpg?v=1622444543"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07R38JVJZ.jpg?v=1651233948","options":["Title"],"media":[{"alt":"Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V - NewNest Australia","id":27770243842199,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07R38JVJZ.jpg?v=1651233948"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07R38JVJZ.jpg?v=1651233948","width":1200},{"alt":"Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V - NewNest Australia","id":21308253995159,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1772,"width":1772,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71vuPBgwyyL_3a3962c1-14e5-49a4-9e13-4e0acc08cf4b.jpg?v=1622444543"},"aspect_ratio":1.0,"height":1772,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71vuPBgwyyL_3a3962c1-14e5-49a4-9e13-4e0acc08cf4b.jpg?v=1622444543","width":1772},{"alt":"Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V - NewNest Australia","id":21308254060695,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ti6ReA6mL_f3640c49-8e6c-4856-bf96-1e13b827bfb6.jpg?v=1622444543"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ti6ReA6mL_f3640c49-8e6c-4856-bf96-1e13b827bfb6.jpg?v=1622444543","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTable Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V\/250V\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA switch handles all on\/off and variable speed functions. They also have a\nrole in electric breaking; they can momentarily reverse electrical polarity.\nIf your table saw is showing any of these symptoms; replacing the switch could\nsolve your problem: 1) Saw won’t turn on when switch is activated 2) Saw dies\nintermittently This part is compatible with the following machines: Compatible\nwith Ryobi BS1001SV 10\" Band Saw BS902 9\" Band Saw BS903 9\" Band Saw BTS15 10\"\nTable Saw BTS20 10\" Portable Table Saw BTS20R 10\" Table Saw BTS20R-1 10\" Table\nSaw BTS21 10\" Table Saw DP120 12\" Drill Press OSS500 Osclillating Spindle\nSander BTS16 10\" Table Saw RTS30 10\" Portable Table Saw RTS20 Portable Table\nSaw with Quick Stand RTS10 10\" Table Saw BTS211 10\" Table Saw RTS21 10 in.\nTable Saw RTS21G RTS21G 10-In. Table Saw\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTABLE SAW SWITCH: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. Note,it's not created or sold by Ryobi.\u003c\/li\u003e\n \u003cli\u003eVOLTAGE: Emergency stop switch replaces part #: 16102010G, ,452080007 , 984407003 and 984406001. Rated current: 20 Amps at 125V, 12 Amps at 250V.\u003c\/li\u003e\n \u003cli\u003ePREMIUM QUALITY: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.\u003c\/li\u003e\n \u003cli\u003eCOMPATIBLE WITH: Table saw switch is compatible with Ryobi BS1001SV 10\" Band Saw, BS902 9\" Band Saw, BS903 9\" Band Saw,BTS15 10\" Table Saw, BTS20 10\" Portable Table Saw, BTS20R 10\" Table Saw, BTS20R-1 10\" Table Saw, BTS21 10\" Table Saw\u003c\/li\u003e\n \u003cli\u003eCOMPATIBLE WITH: Compatible with DP120 12\" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10\" Table Saw, RTS30 10\" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10\" Table Saw, BTS211 10\" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696827519127,"title":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK","handle":"powertec-71338-plastic-l-push-stick-deluxe-l-shaped-woodworking-push-tools-2-pack-patent-pending-l-push-stick-2pk","description":"\u003ch3\u003ePOWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:L Push Stick, 2PK If you’ve ever injured your hand operating power or\ntable saw equipment while maneuvering stock materials – then you know the\nimportance of hand safety, and keeping them away from blades and cutters.\nWhether you’re a novice or experienced DIY type of person, taking the\nnecessary steps towards preventing accidents is part of being a professional.\nIntroducing the Deluxe L- Shaped Push Sticks by POWERTEC. These well crafted\nl-shaped style of push sticks (or sometimes referred to as V-type push sticks)\nare the perfect addition to any woodworking tool set. Not only do they help\nkeep your hands out of harms way, but they reduce the risk of kickback, and\noften result in smoother cuts, producing a more professional looking finish.\nUnlike the traditional straight push stick version, these give you the ability\nto get a bit closer to the blade, taking more of a “hands-on” approach, and in\nmost cases simply using one stick to push the entire workpiece down. This\ndeluxe version allows you to comfortably grip the handle without having to\nshift or adjust your grip during application (which can be extremely unsafe).\nThese woodworking tool accessories ensure optimal versatility, and can be used\nwith a variety of machines, including: Table sawsRouter TablesJointersShapers\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINCLUDES: (2) Deluxe L-Shaped Push Sticks\u003c\/li\u003e\n \u003cli\u003eFUNCTION: Provides hand safety while guiding wood for sawing and cutting allowing you to push the entire workpiece down with a single push stick\u003c\/li\u003e\n \u003cli\u003eAPPLICATIONS: The L Push Sticks (sometimes referred to as V Push Sticks) are commonly used in combination with jointers, tablesaws, router tables and shapers\u003c\/li\u003e\n \u003cli\u003eCRAFTSMANSHIP: These well crafted woodworking hand safety tools were constructed for long-term durability, and designed with extended heels, additional padding and extra ribs for added structure(Patent pending)\u003c\/li\u003e\n \u003cli\u003eDELUXE GRIP: This premium pusher tool features a safe, ergonomic handle thats easy to work with and feels natural in the hand\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:11:26+10:00","created_at":"2021-04-07T23:11:26+10:00","vendor":"POWERTEC","type":"Table Saw Accessories","tags":["nn05"],"price":13600,"price_min":13600,"price_max":13600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735791714455,"title":"L Push Stick, 2PK","option1":"L Push Stick, 2PK","option2":null,"option3":null,"sku":"B07QV21WPS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - L Push Stick, 2PK","public_title":"L Push Stick, 2PK","options":["L Push Stick, 2PK"],"price":13600,"weight":275,"compare_at_price":null,"inventory_management":null,"barcode":"843441103899","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07QV21WPS.jpg?v=1651233863","\/\/newnestshop.com\/cdn\/shop\/products\/71C3CuPGT3L.jpg?v=1622444456","\/\/newnestshop.com\/cdn\/shop\/products\/71UiqxWj6CL.jpg?v=1622444456","\/\/newnestshop.com\/cdn\/shop\/products\/71TDTtxYUhL.jpg?v=1622444456","\/\/newnestshop.com\/cdn\/shop\/products\/51ebBvdCFsL.jpg?v=1622444456","\/\/newnestshop.com\/cdn\/shop\/products\/61uOP96jmdL_ea95aae9-21d9-4e16-be65-5e9ef5a478af.jpg?v=1622444456"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07QV21WPS.jpg?v=1651233863","options":["Style"],"media":[{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":27770233127063,"position":1,"preview_image":{"aspect_ratio":0.998,"height":1245,"width":1243,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07QV21WPS.jpg?v=1651233863"},"aspect_ratio":0.998,"height":1245,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07QV21WPS.jpg?v=1651233863","width":1243},{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":21308196913303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71C3CuPGT3L.jpg?v=1622444456"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71C3CuPGT3L.jpg?v=1622444456","width":2560},{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":21308196946071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71UiqxWj6CL.jpg?v=1622444456"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71UiqxWj6CL.jpg?v=1622444456","width":1200},{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":21308196978839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71TDTtxYUhL.jpg?v=1622444456"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71TDTtxYUhL.jpg?v=1622444456","width":1200},{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":21308197011607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51ebBvdCFsL.jpg?v=1622444456"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51ebBvdCFsL.jpg?v=1622444456","width":1200},{"alt":"POWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending) L Push Stick, 2PK - NewNest Australia","id":21308197044375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61uOP96jmdL_ea95aae9-21d9-4e16-be65-5e9ef5a478af.jpg?v=1622444456"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61uOP96jmdL_ea95aae9-21d9-4e16-be65-5e9ef5a478af.jpg?v=1622444456","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePOWERTEC 71338 Plastic L-Push Stick | Deluxe L-Shaped Woodworking Push Tools – 2 Pack (Patent Pending)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:L Push Stick, 2PK If you’ve ever injured your hand operating power or\ntable saw equipment while maneuvering stock materials – then you know the\nimportance of hand safety, and keeping them away from blades and cutters.\nWhether you’re a novice or experienced DIY type of person, taking the\nnecessary steps towards preventing accidents is part of being a professional.\nIntroducing the Deluxe L- Shaped Push Sticks by POWERTEC. These well crafted\nl-shaped style of push sticks (or sometimes referred to as V-type push sticks)\nare the perfect addition to any woodworking tool set. Not only do they help\nkeep your hands out of harms way, but they reduce the risk of kickback, and\noften result in smoother cuts, producing a more professional looking finish.\nUnlike the traditional straight push stick version, these give you the ability\nto get a bit closer to the blade, taking more of a “hands-on” approach, and in\nmost cases simply using one stick to push the entire workpiece down. This\ndeluxe version allows you to comfortably grip the handle without having to\nshift or adjust your grip during application (which can be extremely unsafe).\nThese woodworking tool accessories ensure optimal versatility, and can be used\nwith a variety of machines, including: Table sawsRouter TablesJointersShapers\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINCLUDES: (2) Deluxe L-Shaped Push Sticks\u003c\/li\u003e\n \u003cli\u003eFUNCTION: Provides hand safety while guiding wood for sawing and cutting allowing you to push the entire workpiece down with a single push stick\u003c\/li\u003e\n \u003cli\u003eAPPLICATIONS: The L Push Sticks (sometimes referred to as V Push Sticks) are commonly used in combination with jointers, tablesaws, router tables and shapers\u003c\/li\u003e\n \u003cli\u003eCRAFTSMANSHIP: These well crafted woodworking hand safety tools were constructed for long-term durability, and designed with extended heels, additional padding and extra ribs for added structure(Patent pending)\u003c\/li\u003e\n \u003cli\u003eDELUXE GRIP: This premium pusher tool features a safe, ergonomic handle thats easy to work with and feels natural in the hand\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696807628951,"title":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006","handle":"bora-saw-plate-the-easy-to-use-saw-sled-circular-saw-guide-that-ensures-straight-precise-cuts-easily-rip-plywood-or-other-sheet-material-to-your-exact-specifications-measurements-544006","description":"\u003ch3\u003eBora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026amp; Measurements | 544006\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePrecise cuts in sheet materials or solid wood requires the right setup. The\nimproved Bora saw plate delivers that with innovative new features that\nincrease precision, accuracy and repeatability. With 3 solid connection points\nto your saw, it holds tight to give you confidence and precision with every\ncut, allowing for pro level results.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWorks with the Bora WTX Clamp edges and Bora NGX clamp edges\u003c\/li\u003e\n \u003cli\u003eVersatile - Fits right- and left-handed circular saws\u003c\/li\u003e\n \u003cli\u003eImproved Front fence minimizes side to side tool movement\u003c\/li\u003e\n \u003cli\u003eNew side stop allows you to replace the tool in exactly the same place, every time\u003c\/li\u003e\n \u003cli\u003eLow profile front Clamps allow a greater range of placement\u003c\/li\u003e\n \u003cli\u003eFriction fit cut indicator doesn't require tools to adjust or lock in place\u003c\/li\u003e\n \u003cli\u003eSecure - 3 points of contact means your saw is held securely while cutting\u003c\/li\u003e\n \u003cli\u003eReplaces Bora saw plate - 542006\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:06:08+10:00","created_at":"2021-04-07T23:06:08+10:00","vendor":"Bora","type":"Saw Fences","tags":["nn05"],"price":18600,"price_min":18600,"price_max":18600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735751147671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07RRYG8ZZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006","public_title":null,"options":["Default Title"],"price":18600,"weight":475,"compare_at_price":null,"inventory_management":null,"barcode":"878258003995","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07RRYG8ZZ.jpg?v=1651233470","\/\/newnestshop.com\/cdn\/shop\/products\/71899h-s2RL.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/61r3Ss32I2L.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/6163HvhIBtL.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/71sD6L70rYL.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/81C7hDxNFmL.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/81CbVm0Mt3L.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/61BnLg8u_2BKL.jpg?v=1622444102","\/\/newnestshop.com\/cdn\/shop\/products\/91un-_2BZQgDL.jpg?v=1622444102"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RRYG8ZZ.jpg?v=1651233470","options":["Title"],"media":[{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":27770183319703,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1239,"width":1240,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RRYG8ZZ.jpg?v=1651233470"},"aspect_ratio":1.001,"height":1239,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RRYG8ZZ.jpg?v=1651233470","width":1240},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925528727,"position":2,"preview_image":{"aspect_ratio":1.346,"height":1248,"width":1680,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71899h-s2RL.jpg?v=1622444102"},"aspect_ratio":1.346,"height":1248,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71899h-s2RL.jpg?v=1622444102","width":1680},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925561495,"position":3,"preview_image":{"aspect_ratio":1.495,"height":828,"width":1238,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61r3Ss32I2L.jpg?v=1622444102"},"aspect_ratio":1.495,"height":828,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61r3Ss32I2L.jpg?v=1622444102","width":1238},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925594263,"position":4,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/6163HvhIBtL.jpg?v=1622444102"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/6163HvhIBtL.jpg?v=1622444102","width":1000},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925627031,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1200,"width":1800,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71sD6L70rYL.jpg?v=1622444102"},"aspect_ratio":1.5,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71sD6L70rYL.jpg?v=1622444102","width":1800},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925659799,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81C7hDxNFmL.jpg?v=1622444102"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81C7hDxNFmL.jpg?v=1622444102","width":2560},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925692567,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81CbVm0Mt3L.jpg?v=1622444102"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81CbVm0Mt3L.jpg?v=1622444102","width":2500},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925725335,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61BnLg8u_2BKL.jpg?v=1622444102"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61BnLg8u_2BKL.jpg?v=1622444102","width":1000},{"alt":"Bora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026 Measurements | 544006 - NewNest Australia","id":21307925758103,"position":9,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91un-_2BZQgDL.jpg?v=1622444102"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91un-_2BZQgDL.jpg?v=1622444102","width":2500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBora Saw Plate – The Easy To Use Saw Sled\/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications \u0026amp; Measurements | 544006\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePrecise cuts in sheet materials or solid wood requires the right setup. The\nimproved Bora saw plate delivers that with innovative new features that\nincrease precision, accuracy and repeatability. With 3 solid connection points\nto your saw, it holds tight to give you confidence and precision with every\ncut, allowing for pro level results.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWorks with the Bora WTX Clamp edges and Bora NGX clamp edges\u003c\/li\u003e\n \u003cli\u003eVersatile - Fits right- and left-handed circular saws\u003c\/li\u003e\n \u003cli\u003eImproved Front fence minimizes side to side tool movement\u003c\/li\u003e\n \u003cli\u003eNew side stop allows you to replace the tool in exactly the same place, every time\u003c\/li\u003e\n \u003cli\u003eLow profile front Clamps allow a greater range of placement\u003c\/li\u003e\n \u003cli\u003eFriction fit cut indicator doesn't require tools to adjust or lock in place\u003c\/li\u003e\n \u003cli\u003eSecure - 3 points of contact means your saw is held securely while cutting\u003c\/li\u003e\n \u003cli\u003eReplaces Bora saw plate - 542006\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696786231447,"title":"Makita 164095-8 Rip Fence for Circular Saws, Black","handle":"makita-164095-8-rip-fence-for-circular-saws-black","description":"\u003ch3\u003eMakita 164095-8 Rip Fence for Circular Saws, Black\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMakita 164095-8 Rip Fence for Circular Saws\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFits Makita models 5005BA, 5007NB, 5057KB, 5046DwB, 5621DWA Circular Saws\u003c\/li\u003e\n \u003cli\u003ePackage Dimensions : 11.5\" L x 4.8\" W x 0.5\" H\u003c\/li\u003e\n \u003cli\u003eThe package weight is 0.5 pounds\u003c\/li\u003e\n \u003cli\u003eMade in China\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:01:41+10:00","created_at":"2021-04-07T23:01:41+10:00","vendor":"Makita","type":"Saw Fences","tags":["nn05"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735725162647,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0007SXH64","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Makita 164095-8 Rip Fence for Circular Saws, Black","public_title":null,"options":["Default Title"],"price":11500,"weight":100,"compare_at_price":null,"inventory_management":null,"barcode":"088381101080","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0007SXH64.jpg?v=1651233203","\/\/newnestshop.com\/cdn\/shop\/products\/21iGNlzmqPL.jpg?v=1622443837","\/\/newnestshop.com\/cdn\/shop\/products\/61-2Wq0oBHL.jpg?v=1622443837"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0007SXH64.jpg?v=1651233203","options":["Title"],"media":[{"alt":"Makita 164095-8 Rip Fence for Circular Saws, Black - NewNest Australia","id":27770139377815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0007SXH64.jpg?v=1651233203"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0007SXH64.jpg?v=1651233203","width":1000},{"alt":"Makita 164095-8 Rip Fence for Circular Saws, Black - NewNest Australia","id":21307780235415,"position":2,"preview_image":{"aspect_ratio":2.092,"height":239,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/21iGNlzmqPL.jpg?v=1622443837"},"aspect_ratio":2.092,"height":239,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/21iGNlzmqPL.jpg?v=1622443837","width":500},{"alt":"Makita 164095-8 Rip Fence for Circular Saws, Black - NewNest Australia","id":21307780268183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61-2Wq0oBHL.jpg?v=1622443837"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61-2Wq0oBHL.jpg?v=1622443837","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMakita 164095-8 Rip Fence for Circular Saws, Black\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMakita 164095-8 Rip Fence for Circular Saws\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFits Makita models 5005BA, 5007NB, 5057KB, 5046DwB, 5621DWA Circular Saws\u003c\/li\u003e\n \u003cli\u003ePackage Dimensions : 11.5\" L x 4.8\" W x 0.5\" H\u003c\/li\u003e\n \u003cli\u003eThe package weight is 0.5 pounds\u003c\/li\u003e\n \u003cli\u003eMade in China\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696666529943,"title":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws","handle":"grr-rip-block-smart-hook-pushblock-for-router-table-jointer-and-band-saws","description":"\u003ch3\u003eGRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:BLOCK Smart Hook Pushblock GRR-RIP BLOCK is the smart choice for safety.\nHarness the ultimate gripping power of the only pushblock with smart heel\nhooks that know where to grab your workpiece. Smart hooks grab the tail end of\nthe board to give you complete control and confidence to finish the cut. Smart\nHooks automatically drop down when you need them, and instantly retract mid-\nboard. They can also be locked into the retracted position. There when you\nneed them – out of the way when you don’t. Nothing is more unnerving than a\npushpad that slips and breaks down. Our proprietary non-slip Green GRR-RIP\ngrips like magic and lasts longer than traditional non-slip materials. The\npodular design is made of pods that individually compress, giving you better\ntraction than flat pushpads. The grooves allow for wood dust and debris to\nescape. Easily cleaned with denatured or household rubbing alcohol. Use the\n90-degree Flip Guide for veneers and resawing on the bandsaw, or for beaded\nface frames and other special profiles against the router table fence. No\nmatter which way you flip it, smart hooks still fall into place. Use the GRR-\nRIP BLOCK in the vertical position to resaw or veneer cuts firmly against the\nfence to prevent bandsaw drift and ensure a straight cut from beginning to\nend. Made in the USA. A true MICROJIG Innovation. Add to you Cart Today! 100%\nSatisfaction . Work Safer. Work Smarter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAuto-retracting heel technology hooks the tail-end of your board\u003c\/li\u003e\n \u003cli\u003eProprietary Green GRR-RIP for extreme hold\u003c\/li\u003e\n \u003cli\u003e90-degree flip guide for vertical footing on band saws and router tables\u003c\/li\u003e\n \u003cli\u003eErgonomic handle exerts directional pressure against the fence\u003c\/li\u003e\n \u003cli\u003eOptional mounts for Deflector\/Connector shield plate for additional protection against chip debris\u003c\/li\u003e\n \u003cli\u003e90-degree flipguide for vertical footing on bandsaws and router tables\u003c\/li\u003e\n \u003cli\u003eErgonomic handle exerts directional pressure against the fence\u003c\/li\u003e\n \u003cli\u003eOptional mounts for Deflector\/Connector shield plate for additional protection against chip debris\u003c\/li\u003e\n \u003cli\u003eMade in the USA. A true MICROJIG Innovation.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T22:35:46+10:00","created_at":"2021-04-07T22:35:46+10:00","vendor":"MICROJIG","type":"Table Saw Accessories","tags":["nn05"],"price":18900,"price_min":18900,"price_max":18900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735516135575,"title":"BLOCK Smart Hook Pushblock","option1":"BLOCK Smart Hook Pushblock","option2":null,"option3":null,"sku":"B00DNX3N7S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - BLOCK Smart Hook Pushblock","public_title":"BLOCK Smart Hook Pushblock","options":["BLOCK Smart Hook Pushblock"],"price":18900,"weight":499,"compare_at_price":null,"inventory_management":null,"barcode":"815267010439","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00DNX3N7S.jpg?v=1651231606","\/\/newnestshop.com\/cdn\/shop\/products\/81G9N1r9JzL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/712bDHoh3kL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/81Ri4OqC4pL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/81tCTZWZ7eL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/71YHXz0-ZPL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/81LPBTP8JcL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/71_2BXf5dI8LL.jpg?v=1622442224","\/\/newnestshop.com\/cdn\/shop\/products\/812wq5LsfDL.jpg?v=1622442224"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00DNX3N7S.jpg?v=1651231606","options":["Style"],"media":[{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":27769695699095,"position":1,"preview_image":{"aspect_ratio":0.665,"height":2560,"width":1703,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00DNX3N7S.jpg?v=1651231606"},"aspect_ratio":0.665,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00DNX3N7S.jpg?v=1651231606","width":1703},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699350167,"position":2,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81G9N1r9JzL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81G9N1r9JzL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699382935,"position":3,"preview_image":{"aspect_ratio":1.778,"height":1440,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/712bDHoh3kL.jpg?v=1622442224"},"aspect_ratio":1.778,"height":1440,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/712bDHoh3kL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699415703,"position":4,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Ri4OqC4pL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Ri4OqC4pL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699448471,"position":5,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tCTZWZ7eL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tCTZWZ7eL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699481239,"position":6,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71YHXz0-ZPL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71YHXz0-ZPL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699514007,"position":7,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81LPBTP8JcL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81LPBTP8JcL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699546775,"position":8,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71_2BXf5dI8LL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71_2BXf5dI8LL.jpg?v=1622442224","width":2560},{"alt":"GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws - NewNest Australia","id":21306699579543,"position":9,"preview_image":{"aspect_ratio":1.503,"height":1703,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/812wq5LsfDL.jpg?v=1622442224"},"aspect_ratio":1.503,"height":1703,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/812wq5LsfDL.jpg?v=1622442224","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eGRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:BLOCK Smart Hook Pushblock GRR-RIP BLOCK is the smart choice for safety.\nHarness the ultimate gripping power of the only pushblock with smart heel\nhooks that know where to grab your workpiece. Smart hooks grab the tail end of\nthe board to give you complete control and confidence to finish the cut. Smart\nHooks automatically drop down when you need them, and instantly retract mid-\nboard. They can also be locked into the retracted position. There when you\nneed them – out of the way when you don’t. Nothing is more unnerving than a\npushpad that slips and breaks down. Our proprietary non-slip Green GRR-RIP\ngrips like magic and lasts longer than traditional non-slip materials. The\npodular design is made of pods that individually compress, giving you better\ntraction than flat pushpads. The grooves allow for wood dust and debris to\nescape. Easily cleaned with denatured or household rubbing alcohol. Use the\n90-degree Flip Guide for veneers and resawing on the bandsaw, or for beaded\nface frames and other special profiles against the router table fence. No\nmatter which way you flip it, smart hooks still fall into place. Use the GRR-\nRIP BLOCK in the vertical position to resaw or veneer cuts firmly against the\nfence to prevent bandsaw drift and ensure a straight cut from beginning to\nend. Made in the USA. A true MICROJIG Innovation. Add to you Cart Today! 100%\nSatisfaction . Work Safer. Work Smarter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAuto-retracting heel technology hooks the tail-end of your board\u003c\/li\u003e\n \u003cli\u003eProprietary Green GRR-RIP for extreme hold\u003c\/li\u003e\n \u003cli\u003e90-degree flip guide for vertical footing on band saws and router tables\u003c\/li\u003e\n \u003cli\u003eErgonomic handle exerts directional pressure against the fence\u003c\/li\u003e\n \u003cli\u003eOptional mounts for Deflector\/Connector shield plate for additional protection against chip debris\u003c\/li\u003e\n \u003cli\u003e90-degree flipguide for vertical footing on bandsaws and router tables\u003c\/li\u003e\n \u003cli\u003eErgonomic handle exerts directional pressure against the fence\u003c\/li\u003e\n \u003cli\u003eOptional mounts for Deflector\/Connector shield plate for additional protection against chip debris\u003c\/li\u003e\n \u003cli\u003eMade in the USA. A true MICROJIG Innovation.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6692467310743,"title":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches","handle":"mj-splitter-steelpro-by-microjig-table-saw-safety-1-8-kerf-splitter-and-riving-knife-alternative-for-zero-clearance-insert-4-x-0-5-x-4-inches","description":"\u003ch3\u003eMJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4 x 0.5 x 4 inches The ML SPLITTER SteelPro is our toughest table saw\nsplitter yet. Virtually eliminate kickback and prevent wood burning on your\ntable saw. Consider a core made of stainless steel and then coated with smooth\nhigh density ABS plastic--that is the SteelPro. MJ SPLITTER SteelPro is\ndesigned for 1\/8\" Kerf saw blades range: (0.118\" – 0.145\"). Each package comes\nwith 4 SteelPro Splitters, 4 Kerf Keepers, installation guide, drill guide,\nand drill bit for easy installation. The Dual Splitter approach will utilize\nour mini-feather board effect to off-set both sides of the work piece, keeper\npiece and off-cut piece. Each SteelPro Splitter is fine-tuned to several\nthousands of an inch to keep pressure off the keeper piece against the fence.\nOnce installed, you'll be able to plug and play with the SteelPro because each\nSplitter comes with a different offset marked on each with a \"+.\" And each \"+\"\nrepresents 0.003'' up to \"+++\" which is 0.009''. We have also included our\nKerf Keepers which are designed to prevent binding from warping reactive solid\nwood. Always use the correct MJ SPLITTER SteelPro in correspondence to your\nkerf range. Only for 90 degree cuts. Made in the USA. Made by MICROJIG. Watch\nthe Action Video and Add to Your Cart Today! Work safer. Work Smarter\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAvoid kickback on your table saw with a safety splitter.\u003c\/li\u003e\n \u003cli\u003eInstalls directly to wood or plastic Zero Clearance Inserts (Throatplates)\u003c\/li\u003e\n \u003cli\u003eMini-featherboard technology keeps the workpiece against the fence and prevents burning\u003c\/li\u003e\n \u003cli\u003eMade in the USA.\u003c\/li\u003e\n \u003cli\u003e100% Satisfaction Guaranteed. Responsive Support Team!\u003c\/li\u003e\n \u003cli\u003eFor use with Plastic or Wood-based Throatplates Only\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T21:14:10+10:00","created_at":"2021-04-06T21:14:10+10:00","vendor":"MICRO JIG","type":"Table Saw Accessories","tags":["nn05"],"price":21800,"price_min":21800,"price_max":21800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725723648151,"title":"4 x 0.5 x 4 inches","option1":"4 x 0.5 x 4 inches","option2":null,"option3":null,"sku":"B003E623C0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - 4 x 0.5 x 4 inches","public_title":"4 x 0.5 x 4 inches","options":["4 x 0.5 x 4 inches"],"price":21800,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":"815267010279","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B003E623C0.jpg?v=1651229645","\/\/newnestshop.com\/cdn\/shop\/products\/91dCY5nYEcL.jpg?v=1622440256","\/\/newnestshop.com\/cdn\/shop\/products\/91sJYHYHuzL.jpg?v=1622440256","\/\/newnestshop.com\/cdn\/shop\/products\/91ssIM-sW_2BL.jpg?v=1622440256","\/\/newnestshop.com\/cdn\/shop\/products\/91-j_2BP5iP4L.jpg?v=1622440256"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B003E623C0.jpg?v=1651229645","options":["Size"],"media":[{"alt":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - NewNest Australia","id":27769386533015,"position":1,"preview_image":{"aspect_ratio":1.895,"height":1351,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B003E623C0.jpg?v=1651229645"},"aspect_ratio":1.895,"height":1351,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B003E623C0.jpg?v=1651229645","width":2560},{"alt":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - NewNest Australia","id":21266457231511,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91dCY5nYEcL.jpg?v=1622440256"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91dCY5nYEcL.jpg?v=1622440256","width":2560},{"alt":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - NewNest Australia","id":21266457264279,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91sJYHYHuzL.jpg?v=1622440256"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91sJYHYHuzL.jpg?v=1622440256","width":2560},{"alt":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - NewNest Australia","id":21266457297047,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91ssIM-sW_2BL.jpg?v=1622440256"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91ssIM-sW_2BL.jpg?v=1622440256","width":2560},{"alt":"MJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert 4 x 0.5 x 4 inches - NewNest Australia","id":21266457329815,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91-j_2BP5iP4L.jpg?v=1622440256"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91-j_2BP5iP4L.jpg?v=1622440256","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMJ SPLITTER SteelPro by MICROJIG - Table Saw Safety 1\/8\" Kerf Splitter and Riving Knife Alternative for Zero Clearance Insert\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4 x 0.5 x 4 inches The ML SPLITTER SteelPro is our toughest table saw\nsplitter yet. Virtually eliminate kickback and prevent wood burning on your\ntable saw. Consider a core made of stainless steel and then coated with smooth\nhigh density ABS plastic--that is the SteelPro. MJ SPLITTER SteelPro is\ndesigned for 1\/8\" Kerf saw blades range: (0.118\" – 0.145\"). Each package comes\nwith 4 SteelPro Splitters, 4 Kerf Keepers, installation guide, drill guide,\nand drill bit for easy installation. The Dual Splitter approach will utilize\nour mini-feather board effect to off-set both sides of the work piece, keeper\npiece and off-cut piece. Each SteelPro Splitter is fine-tuned to several\nthousands of an inch to keep pressure off the keeper piece against the fence.\nOnce installed, you'll be able to plug and play with the SteelPro because each\nSplitter comes with a different offset marked on each with a \"+.\" And each \"+\"\nrepresents 0.003'' up to \"+++\" which is 0.009''. We have also included our\nKerf Keepers which are designed to prevent binding from warping reactive solid\nwood. Always use the correct MJ SPLITTER SteelPro in correspondence to your\nkerf range. Only for 90 degree cuts. Made in the USA. Made by MICROJIG. Watch\nthe Action Video and Add to Your Cart Today! Work safer. Work Smarter\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAvoid kickback on your table saw with a safety splitter.\u003c\/li\u003e\n \u003cli\u003eInstalls directly to wood or plastic Zero Clearance Inserts (Throatplates)\u003c\/li\u003e\n \u003cli\u003eMini-featherboard technology keeps the workpiece against the fence and prevents burning\u003c\/li\u003e\n \u003cli\u003eMade in the USA.\u003c\/li\u003e\n \u003cli\u003e100% Satisfaction Guaranteed. Responsive Support Team!\u003c\/li\u003e\n \u003cli\u003eFor use with Plastic or Wood-based Throatplates Only\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6692396531863,"title":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws","handle":"safety-push-block-2-pack-safety-orange-color-for-high-visibility-ideal-for-use-on-router-tables-jointers-shapers-and-band-saws","description":"\u003ch3\u003eSafety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePush blocks are designed to be one of your essential safety devices to help\nprovide protection and prevent your fingers from getting too close to cutters\nor blades on a router table, shaper, band saw, table saw or a jointer. Push\nblocks work well in multiple situations throughout your woodworking projects\nand are intended to be used any time your fingers are close to being in harms\nway. Push blocks can be used one at a time like when feeding stock through\nyour router table or you could use two at a time for extra downward pressure\nwhen feeding stock through on a jointer. They also work well on band saws for\nre-saw applications and can also be used on shapers much in the same way they\nare used on router tables. This Push Block has been intentionally made in a\nbright SAFETY ORANGE color for high visibility when in use. This provides the\nuser the ability to see exactly where their hands are at during the cutting or\nmilling process. The bright SAFETY ORANGE color also allows you to easily find\nthe device when it’s not in its normal location. The 3\" X 6\" soft, receptive,\nrubber sole foam pads line the base of the push block. The rubber soles make\npushing and controlling your stock much easier and safer than doing it free\nhanded. The rubber soles are easily washable with warm water. You must let the\nrubber soles completely dry prior to using them again after cleaning them.\nEach push block is made from a thick, injection molded polyethylene plastic\nthat will not crack or shatter when dropped or if comes in contact with a\nblade or cutter. This makes ideal for workshop or wood shop working\nenvironments where things tend to go through natural wear and tear on a daily\nbasis.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIdeal for router tables, band saws, jointers and shapers. Made from heavy duty material to stand up to the everyday workshop enviornment.\u003c\/li\u003e\n \u003cli\u003ePush blocks are designed to be one of your essential safety devices to help provide protection and prevent your fingers from getting too close to cutters or blades on a router table, band saw, shaper or a jointer. Push blocks work well in multiple situations throughout your woodworking projects and are intended to be used any time your fingers are close to being in harms way.\u003c\/li\u003e\n \u003cli\u003ePush blocks can be used one at a time like when feeding stock through your router table with a fence or you could use two at a time for extra downward pressure like when you would feed stock through on a jointer. They also work well on band saws for re-saw applications and can also be used on shapers much in the same way they are used on router tables.\u003c\/li\u003e\n \u003cli\u003eThis Push Block has been intentionally made in a bright SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly where their hands are at during the cutting or milling process. The bright SAFETY ORANGE color also allows you to easily find the device when its not in its normal location.\u003c\/li\u003e\n \u003cli\u003eThe 3\" x 6\" soft, receptive, rubber sole foam pads line the base of the push block. The rubber soles make pushing and controlling your stock much easier and safer than doing it free handed. The rubber soles are easily washable with warm water. You must let the rubber soles completely dry prior to using them again after cleaning them.\u003c\/li\u003e\n \u003cli\u003eEach push block is made from a thick, injection molded polyethylene plastic. This makes ideal for workshop or wood shop working environments where things tend to go through heavy wear and tear on a daily basis.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T21:03:06+10:00","created_at":"2021-04-06T21:03:06+10:00","vendor":"Fulton","type":"Table Saw Accessories","tags":["nn05"],"price":13300,"price_min":13300,"price_max":13300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725632061591,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07V7GYPY1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws","public_title":null,"options":["Default Title"],"price":13300,"weight":449,"compare_at_price":null,"inventory_management":null,"barcode":"1214","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07V7GYPY1.jpg?v=1651228962","\/\/newnestshop.com\/cdn\/shop\/products\/81XVhYMBaVL.jpg?v=1622439596","\/\/newnestshop.com\/cdn\/shop\/products\/81W_2B_2BgS8y-L.jpg?v=1622439596","\/\/newnestshop.com\/cdn\/shop\/products\/81XHnV82j-L.jpg?v=1622439596","\/\/newnestshop.com\/cdn\/shop\/products\/81EyoZVV1oL.jpg?v=1622439596","\/\/newnestshop.com\/cdn\/shop\/products\/71bBXem5YnL.jpg?v=1622439596","\/\/newnestshop.com\/cdn\/shop\/products\/71MVtRD20PL.jpg?v=1622439596"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07V7GYPY1.jpg?v=1651228962","options":["Title"],"media":[{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":27769293734039,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07V7GYPY1.jpg?v=1651228962"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07V7GYPY1.jpg?v=1651228962","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237587607,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81XVhYMBaVL.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81XVhYMBaVL.jpg?v=1622439596","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237620375,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81W_2B_2BgS8y-L.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81W_2B_2BgS8y-L.jpg?v=1622439596","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237653143,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81XHnV82j-L.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81XHnV82j-L.jpg?v=1622439596","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237685911,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81EyoZVV1oL.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81EyoZVV1oL.jpg?v=1622439596","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237718679,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71bBXem5YnL.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71bBXem5YnL.jpg?v=1622439596","width":2000},{"alt":"Safety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws - NewNest Australia","id":21266237751447,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71MVtRD20PL.jpg?v=1622439596"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71MVtRD20PL.jpg?v=1622439596","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSafety Push Block 2 Pack, Safety Orange Color for High Visibility Ideal for Use On Router Tables, Jointers, Shapers and Band Saws\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePush blocks are designed to be one of your essential safety devices to help\nprovide protection and prevent your fingers from getting too close to cutters\nor blades on a router table, shaper, band saw, table saw or a jointer. Push\nblocks work well in multiple situations throughout your woodworking projects\nand are intended to be used any time your fingers are close to being in harms\nway. Push blocks can be used one at a time like when feeding stock through\nyour router table or you could use two at a time for extra downward pressure\nwhen feeding stock through on a jointer. They also work well on band saws for\nre-saw applications and can also be used on shapers much in the same way they\nare used on router tables. This Push Block has been intentionally made in a\nbright SAFETY ORANGE color for high visibility when in use. This provides the\nuser the ability to see exactly where their hands are at during the cutting or\nmilling process. The bright SAFETY ORANGE color also allows you to easily find\nthe device when it’s not in its normal location. The 3\" X 6\" soft, receptive,\nrubber sole foam pads line the base of the push block. The rubber soles make\npushing and controlling your stock much easier and safer than doing it free\nhanded. The rubber soles are easily washable with warm water. You must let the\nrubber soles completely dry prior to using them again after cleaning them.\nEach push block is made from a thick, injection molded polyethylene plastic\nthat will not crack or shatter when dropped or if comes in contact with a\nblade or cutter. This makes ideal for workshop or wood shop working\nenvironments where things tend to go through natural wear and tear on a daily\nbasis.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIdeal for router tables, band saws, jointers and shapers. Made from heavy duty material to stand up to the everyday workshop enviornment.\u003c\/li\u003e\n \u003cli\u003ePush blocks are designed to be one of your essential safety devices to help provide protection and prevent your fingers from getting too close to cutters or blades on a router table, band saw, shaper or a jointer. Push blocks work well in multiple situations throughout your woodworking projects and are intended to be used any time your fingers are close to being in harms way.\u003c\/li\u003e\n \u003cli\u003ePush blocks can be used one at a time like when feeding stock through your router table with a fence or you could use two at a time for extra downward pressure like when you would feed stock through on a jointer. They also work well on band saws for re-saw applications and can also be used on shapers much in the same way they are used on router tables.\u003c\/li\u003e\n \u003cli\u003eThis Push Block has been intentionally made in a bright SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly where their hands are at during the cutting or milling process. The bright SAFETY ORANGE color also allows you to easily find the device when its not in its normal location.\u003c\/li\u003e\n \u003cli\u003eThe 3\" x 6\" soft, receptive, rubber sole foam pads line the base of the push block. The rubber soles make pushing and controlling your stock much easier and safer than doing it free handed. The rubber soles are easily washable with warm water. You must let the rubber soles completely dry prior to using them again after cleaning them.\u003c\/li\u003e\n \u003cli\u003eEach push block is made from a thick, injection molded polyethylene plastic. This makes ideal for workshop or wood shop working environments where things tend to go through heavy wear and tear on a daily basis.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6692362682519,"title":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking","handle":"powertec-71367-3-inch-fence-flip-stop-for-woodworking","description":"\u003ch3\u003ePOWERTEC 71367 3-Inch Fence Flip Stop for Woodworking\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\"Introducing the 3-Inch Fence Flip Stop by POWERTEC. This handy woodworking\naccessory allows you to create highly effective set-ups in your jigs and\nfixture assemblies. It features a universal design made to work with an\nassortment of t-tracks, sleds and is ideal for use with router tables, miter\nsaws, drill presses and more. Made with anodized aluminum, it's a well made\nflip stop that allows you to simply measure, set the stop position and flip it\ndown. Now you can make perfectly uniform, repeatable cuts every time. Easy to\nUse Features． An easy-adjust 1\"\" knob locks in your setting.． Flaunts a handy\nflip-up, flip-down action to promote a streamlined workflow.． The stops arm\ncan be flipped up and out of the way when making odd cuts, without losing your\nsetting.． They conveniently clamp down parallel to your t- track and flush to\nyour fence, effectively preventing side play. Versatile DesignThis stop offers\na unique design that works with universal and larger t-tracks (single, double\n\u0026amp; multi). It can be used in either the inboard, for single track applications,\nor the outboard position for use with double tracks and sacrificial boards. In\naddition, the flip arm can be moved to the left or right side of the body,\nproviding complete flexibility for your application needs. Premium BuildOur\nfence stops are made with die cast aluminum and given a smooth blue anodized\ncoating for corrosion resistance and long lasting durability. POWERTEC is a\nleading manufacturer of high quality woodworking tools and accessories,\nmachines, and an assortment of OEM replacement parts. We are committed to\nexceeding expectations, while bringing the latest innovations, technology, and\nproduct development to the industry.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINCLUDES: (1) T-Track Flip Fence Stop (3 inches) with 5\/16\" T-Bolt\u003c\/li\u003e\n \u003cli\u003eFUNCTION: Creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring\u003c\/li\u003e\n \u003cli\u003eFEATURES: A user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1\" dia knob. The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body.\u003c\/li\u003e\n \u003cli\u003eUNIVERSAL: Works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task (without the need for changing settings)\u003c\/li\u003e\n \u003cli\u003eBUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T20:58:35+10:00","created_at":"2021-04-06T20:58:35+10:00","vendor":"POWERTEC","type":"Saw Fences","tags":["nn05"],"price":15200,"price_min":15200,"price_max":15200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725556498583,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07RJBCS46","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking","public_title":null,"options":["Default Title"],"price":15200,"weight":159,"compare_at_price":null,"inventory_management":null,"barcode":"71367","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07RJBCS46.jpg?v=1651228716","\/\/newnestshop.com\/cdn\/shop\/products\/81g9W6XKGyL.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/61h-v0rhbYL_82b07a3a-c76d-478c-be85-d692ce3795d3.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/613_2BHNx78zL_5b7cc2eb-640e-48b3-9454-afaaba4e015d.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/51Thm5DPStL.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/51wcdtMynyL.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/61OUTJgeayL.jpg?v=1622439345","\/\/newnestshop.com\/cdn\/shop\/products\/6142bgKYLRL_af8a2c3e-9ba5-4a78-b2ae-e2bcd9d9267c.jpg?v=1622439345"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RJBCS46.jpg?v=1651228716","options":["Title"],"media":[{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":27769261719703,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RJBCS46.jpg?v=1651228716"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07RJBCS46.jpg?v=1651228716","width":2560},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143215767,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81g9W6XKGyL.jpg?v=1622439345"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81g9W6XKGyL.jpg?v=1622439345","width":2560},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143314071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61h-v0rhbYL_82b07a3a-c76d-478c-be85-d692ce3795d3.jpg?v=1622439345"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61h-v0rhbYL_82b07a3a-c76d-478c-be85-d692ce3795d3.jpg?v=1622439345","width":1200},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143379607,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/613_2BHNx78zL_5b7cc2eb-640e-48b3-9454-afaaba4e015d.jpg?v=1622439345"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/613_2BHNx78zL_5b7cc2eb-640e-48b3-9454-afaaba4e015d.jpg?v=1622439345","width":1200},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143412375,"position":5,"preview_image":{"aspect_ratio":1.001,"height":1200,"width":1201,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51Thm5DPStL.jpg?v=1622439345"},"aspect_ratio":1.001,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51Thm5DPStL.jpg?v=1622439345","width":1201},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143445143,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1201,"width":1201,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51wcdtMynyL.jpg?v=1622439345"},"aspect_ratio":1.0,"height":1201,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51wcdtMynyL.jpg?v=1622439345","width":1201},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143477911,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1039,"width":1039,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OUTJgeayL.jpg?v=1622439345"},"aspect_ratio":1.0,"height":1039,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OUTJgeayL.jpg?v=1622439345","width":1039},{"alt":"POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking - NewNest Australia","id":21266143510679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/6142bgKYLRL_af8a2c3e-9ba5-4a78-b2ae-e2bcd9d9267c.jpg?v=1622439345"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/6142bgKYLRL_af8a2c3e-9ba5-4a78-b2ae-e2bcd9d9267c.jpg?v=1622439345","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePOWERTEC 71367 3-Inch Fence Flip Stop for Woodworking\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\"Introducing the 3-Inch Fence Flip Stop by POWERTEC. This handy woodworking\naccessory allows you to create highly effective set-ups in your jigs and\nfixture assemblies. It features a universal design made to work with an\nassortment of t-tracks, sleds and is ideal for use with router tables, miter\nsaws, drill presses and more. Made with anodized aluminum, it's a well made\nflip stop that allows you to simply measure, set the stop position and flip it\ndown. Now you can make perfectly uniform, repeatable cuts every time. Easy to\nUse Features． An easy-adjust 1\"\" knob locks in your setting.． Flaunts a handy\nflip-up, flip-down action to promote a streamlined workflow.． The stops arm\ncan be flipped up and out of the way when making odd cuts, without losing your\nsetting.． They conveniently clamp down parallel to your t- track and flush to\nyour fence, effectively preventing side play. Versatile DesignThis stop offers\na unique design that works with universal and larger t-tracks (single, double\n\u0026amp; multi). It can be used in either the inboard, for single track applications,\nor the outboard position for use with double tracks and sacrificial boards. In\naddition, the flip arm can be moved to the left or right side of the body,\nproviding complete flexibility for your application needs. Premium BuildOur\nfence stops are made with die cast aluminum and given a smooth blue anodized\ncoating for corrosion resistance and long lasting durability. POWERTEC is a\nleading manufacturer of high quality woodworking tools and accessories,\nmachines, and an assortment of OEM replacement parts. We are committed to\nexceeding expectations, while bringing the latest innovations, technology, and\nproduct development to the industry.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINCLUDES: (1) T-Track Flip Fence Stop (3 inches) with 5\/16\" T-Bolt\u003c\/li\u003e\n \u003cli\u003eFUNCTION: Creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring\u003c\/li\u003e\n \u003cli\u003eFEATURES: A user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1\" dia knob. The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body.\u003c\/li\u003e\n \u003cli\u003eUNIVERSAL: Works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task (without the need for changing settings)\u003c\/li\u003e\n \u003cli\u003eBUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6692213325975,"title":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods","handle":"urethane-band-saw-tires-12-inch-x-7-8-inch-x-095-inch-2-pack-for-craftsman-band-saws-phoenix-goods","description":"\u003ch3\u003eUrethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e✅Don't be fooled, The genuine product is only \"Phoenix goods\", our company has\nnot authorized any other company to sell this product! Products sold by other\nmerchants through this link are counterfeit, We will take legal action! Please\nlook for \"Sold by Phoenix goods\" before adding to cart. Phoenix goods Urethane\nBandsaw Tires 12″ x 7\/8″ x .095″, 2 pack How to install First, After\ndisassembling old \"tires\", clean up the gummy debris left on the wheels.\nMounting: Used a clamp to hold the tire on the wheel in one spot, and then\nused a screwdriver to pry the rest of the tire on. This made installation\nrelatively easy Uniform stretch: After mounting, removed the clamp and pushed\nthe shaft of the screwdriver completely under the tire, so it was between the\ntire and rim. Then ran the screwdriver around the wheel several times to make\nsure the tire was uniformly stretched around the wheel. Seating the tire:\nNext, made sure the tires were properly seated in the groove on the wheels,\nrolled the wheel on a concrete floor, pushing down pretty hard with your\nhands, so the concrete would forced the tire into the groove. After mounting,\nreinstalled the wheels and readjusted everything, finish! ✅Urethane band saw\ntires no adhesive needed, but need to be stretched on. If your new band saw\ntire is too tight to fit onto the wheel, submerged the new tire under hot\nwater for a few minutes, this will make things easier.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePhoenix goods Urethane Bandsaw Tires 12 x 7\/8 x .095, 2 pack, They can be installed on any 12 band saw that requires a 7\/8 wide and 3\/32 thick tire.\u003c\/li\u003e\n \u003cli\u003eLonger belt life Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime.\u003c\/li\u003e\n \u003cli\u003eFast, easy installation no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary.\u003c\/li\u003e\n \u003cli\u003e12\" x 7\/8\" Tire Fits: Craftsman 103.2 103.24280 113.1 113.2 113.241 113.2411 113.201 113.2411 113.24 113.241 113.244 113.24812 113.242 113.24822 113.241 119.220, Also fits for any band saw that needs a 12 x 7\/8 x .095\" tire.The actual wheel diameter can be 11-6\/8 to 12-1\/2 in diameter\u003c\/li\u003e\n \u003cli\u003eThe surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T20:35:52+10:00","created_at":"2021-04-06T20:35:52+10:00","vendor":"Phoenix goods","type":"Band Saw Accessories","tags":["nn05"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725205749911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0818ZWHSL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods","public_title":null,"options":["Default Title"],"price":14500,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0818ZWHSL.jpg?v=1651227415","\/\/newnestshop.com\/cdn\/shop\/products\/71TfnofyFQL.jpg?v=1622437997","\/\/newnestshop.com\/cdn\/shop\/products\/61cO-MvzOoL.jpg?v=1622437997","\/\/newnestshop.com\/cdn\/shop\/products\/61viBEKvNkL.jpg?v=1622437997","\/\/newnestshop.com\/cdn\/shop\/products\/612CwSzyK4L.jpg?v=1622437997"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0818ZWHSL.jpg?v=1651227415","options":["Title"],"media":[{"alt":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods - NewNest Australia","id":27768830263447,"position":1,"preview_image":{"aspect_ratio":1.088,"height":2240,"width":2436,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0818ZWHSL.jpg?v=1651227415"},"aspect_ratio":1.088,"height":2240,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0818ZWHSL.jpg?v=1651227415","width":2436},{"alt":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods - NewNest Australia","id":21265649565847,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71TfnofyFQL.jpg?v=1622437997"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71TfnofyFQL.jpg?v=1622437997","width":1500},{"alt":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods - NewNest Australia","id":21265649598615,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61cO-MvzOoL.jpg?v=1622437997"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61cO-MvzOoL.jpg?v=1622437997","width":1500},{"alt":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods - NewNest Australia","id":21265649631383,"position":4,"preview_image":{"aspect_ratio":1.214,"height":906,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61viBEKvNkL.jpg?v=1622437997"},"aspect_ratio":1.214,"height":906,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61viBEKvNkL.jpg?v=1622437997","width":1100},{"alt":"Urethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods - NewNest Australia","id":21265649664151,"position":5,"preview_image":{"aspect_ratio":3.901,"height":446,"width":1740,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/612CwSzyK4L.jpg?v=1622437997"},"aspect_ratio":3.901,"height":446,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/612CwSzyK4L.jpg?v=1622437997","width":1740}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eUrethane Band Saw Tires 12 inch x 7\/8 inch x .095 inch 2 Pack for Craftsman Band Saws Phoenix goods\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e✅Don't be fooled, The genuine product is only \"Phoenix goods\", our company has\nnot authorized any other company to sell this product! Products sold by other\nmerchants through this link are counterfeit, We will take legal action! Please\nlook for \"Sold by Phoenix goods\" before adding to cart. Phoenix goods Urethane\nBandsaw Tires 12″ x 7\/8″ x .095″, 2 pack How to install First, After\ndisassembling old \"tires\", clean up the gummy debris left on the wheels.\nMounting: Used a clamp to hold the tire on the wheel in one spot, and then\nused a screwdriver to pry the rest of the tire on. This made installation\nrelatively easy Uniform stretch: After mounting, removed the clamp and pushed\nthe shaft of the screwdriver completely under the tire, so it was between the\ntire and rim. Then ran the screwdriver around the wheel several times to make\nsure the tire was uniformly stretched around the wheel. Seating the tire:\nNext, made sure the tires were properly seated in the groove on the wheels,\nrolled the wheel on a concrete floor, pushing down pretty hard with your\nhands, so the concrete would forced the tire into the groove. After mounting,\nreinstalled the wheels and readjusted everything, finish! ✅Urethane band saw\ntires no adhesive needed, but need to be stretched on. If your new band saw\ntire is too tight to fit onto the wheel, submerged the new tire under hot\nwater for a few minutes, this will make things easier.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePhoenix goods Urethane Bandsaw Tires 12 x 7\/8 x .095, 2 pack, They can be installed on any 12 band saw that requires a 7\/8 wide and 3\/32 thick tire.\u003c\/li\u003e\n \u003cli\u003eLonger belt life Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime.\u003c\/li\u003e\n \u003cli\u003eFast, easy installation no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary.\u003c\/li\u003e\n \u003cli\u003e12\" x 7\/8\" Tire Fits: Craftsman 103.2 103.24280 113.1 113.2 113.241 113.2411 113.201 113.2411 113.24 113.241 113.244 113.24812 113.242 113.24822 113.241 119.220, Also fits for any band saw that needs a 12 x 7\/8 x .095\" tire.The actual wheel diameter can be 11-6\/8 to 12-1\/2 in diameter\u003c\/li\u003e\n \u003cli\u003eThe surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6689055965335,"title":"Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades 1-Pack","handle":"olson-saw-ac70010-saw-blade-lubricant-stick-stone-for-band-saw-blades-1-pack","description":"\u003ch3\u003eOlson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1-Pack Prolongs blade life and produces smoother and quicker cuts. Keeps\nmetal, plastic and wood cutting blades from clogging with wood chips or pitch.\nFor power and hand held cutting tools including band, scroll, circular, hack\nand jewelers saw blades. Lubricant Stick is 8\" long x 1\" in diameter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProlongs blade life and produces smoother and quicker cuts\u003c\/li\u003e\n \u003cli\u003eKeeps metal, plastic and wood cutting blades from clogging with wood chips or pitch\u003c\/li\u003e\n \u003cli\u003eFor power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades\u003c\/li\u003e\n \u003cli\u003eThis wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch.\u003c\/li\u003e\n \u003cli\u003ePush stick into moving saw blade so that teeth are thoroughly coated.\u003c\/li\u003e\n \u003cli\u003eThe wax will flow when saw blade becomes warm, keep the blade clean and prevent clogging.\u003c\/li\u003e\n \u003cli\u003eThis adds to the life of the blade and produces easier, smoother and quicker cuts.\u003c\/li\u003e\n \u003cli\u003eIf using Cool Blocks replacement band saw blade guides apply lubricant stick only to tooth tips.\u003c\/li\u003e\n \u003cli\u003eMade in USA.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T20:13:38+10:00","created_at":"2021-04-05T20:13:38+10:00","vendor":"OLSON SAW","type":"Band Saw Accessories","tags":["nn05"],"price":9300,"price_min":9300,"price_max":9300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39718053085335,"title":"1-Pack","option1":"1-Pack","option2":null,"option3":null,"sku":"B000P4SK9E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades 1-Pack - 1-Pack","public_title":"1-Pack","options":["1-Pack"],"price":9300,"weight":118,"compare_at_price":null,"inventory_management":null,"barcode":"012373700104","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000P4SK9E.jpg?v=1651226244","\/\/newnestshop.com\/cdn\/shop\/products\/61aaCS-5YGL.jpg?v=1622436872","\/\/newnestshop.com\/cdn\/shop\/products\/71fbo0gZmPL.jpg?v=1622436872"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000P4SK9E.jpg?v=1651226244","options":["Size"],"media":[{"alt":"Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades 1-Pack - NewNest Australia","id":27768687001751,"position":1,"preview_image":{"aspect_ratio":2.404,"height":208,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000P4SK9E.jpg?v=1651226244"},"aspect_ratio":2.404,"height":208,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000P4SK9E.jpg?v=1651226244","width":500},{"alt":"Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades 1-Pack - NewNest Australia","id":21252510679191,"position":2,"preview_image":{"aspect_ratio":1.005,"height":1258,"width":1264,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61aaCS-5YGL.jpg?v=1622436872"},"aspect_ratio":1.005,"height":1258,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61aaCS-5YGL.jpg?v=1622436872","width":1264},{"alt":"Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades 1-Pack - NewNest Australia","id":21252510711959,"position":3,"preview_image":{"aspect_ratio":1.362,"height":1110,"width":1512,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71fbo0gZmPL.jpg?v=1622436872"},"aspect_ratio":1.362,"height":1110,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71fbo0gZmPL.jpg?v=1622436872","width":1512}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOlson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1-Pack Prolongs blade life and produces smoother and quicker cuts. Keeps\nmetal, plastic and wood cutting blades from clogging with wood chips or pitch.\nFor power and hand held cutting tools including band, scroll, circular, hack\nand jewelers saw blades. Lubricant Stick is 8\" long x 1\" in diameter.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eProlongs blade life and produces smoother and quicker cuts\u003c\/li\u003e\n \u003cli\u003eKeeps metal, plastic and wood cutting blades from clogging with wood chips or pitch\u003c\/li\u003e\n \u003cli\u003eFor power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades\u003c\/li\u003e\n \u003cli\u003eThis wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch.\u003c\/li\u003e\n \u003cli\u003ePush stick into moving saw blade so that teeth are thoroughly coated.\u003c\/li\u003e\n \u003cli\u003eThe wax will flow when saw blade becomes warm, keep the blade clean and prevent clogging.\u003c\/li\u003e\n \u003cli\u003eThis adds to the life of the blade and produces easier, smoother and quicker cuts.\u003c\/li\u003e\n \u003cli\u003eIf using Cool Blocks replacement band saw blade guides apply lubricant stick only to tooth tips.\u003c\/li\u003e\n \u003cli\u003eMade in USA.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6689016021143,"title":"Bosch WD7RIP Worm Drive Rip Fence","handle":"bosch-wd7rip-worm-drive-rip-fence","description":"\u003ch3\u003eBosch WD7RIP Worm Drive Rip Fence\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eIncludes (1) WD7RIP Rip Fence. New, Bulk Packed. Genuine OEM replacement part.\nConsult owners manual for proper part number identification and proper\ninstallation. Compatible with: Bosch CS20 (0601674039) 7-1\/4\" Circular Saw\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIncludes (1) WD7RIP Rip Fence\u003c\/li\u003e\n \u003cli\u003eNew, Bulk Packed\u003c\/li\u003e\n \u003cli\u003eGenuine Bosch Replacement Part\u003c\/li\u003e\n \u003cli\u003eConsult owners manual for proper part number identification and proper installation\u003c\/li\u003e\n \u003cli\u003ePlease refer to list for compatibility\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T20:01:01+10:00","created_at":"2021-04-05T20:01:01+10:00","vendor":"BOSCH","type":"Saw Fences","tags":["nn05"],"price":12100,"price_min":12100,"price_max":12100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717994823831,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0009H5GBW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bosch WD7RIP Worm Drive Rip Fence","public_title":null,"options":["Default Title"],"price":12100,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"000346317107","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0009H5GBW.jpg?v=1651225446"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0009H5GBW.jpg?v=1651225446","options":["Title"],"media":[{"alt":"Bosch WD7RIP Worm Drive Rip Fence - NewNest Australia","id":27768608817303,"position":1,"preview_image":{"aspect_ratio":1.076,"height":2380,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0009H5GBW.jpg?v=1651225446"},"aspect_ratio":1.076,"height":2380,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0009H5GBW.jpg?v=1651225446","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBosch WD7RIP Worm Drive Rip Fence\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eIncludes (1) WD7RIP Rip Fence. New, Bulk Packed. Genuine OEM replacement part.\nConsult owners manual for proper part number identification and proper\ninstallation. Compatible with: Bosch CS20 (0601674039) 7-1\/4\" Circular Saw\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIncludes (1) WD7RIP Rip Fence\u003c\/li\u003e\n \u003cli\u003eNew, Bulk Packed\u003c\/li\u003e\n \u003cli\u003eGenuine Bosch Replacement Part\u003c\/li\u003e\n \u003cli\u003eConsult owners manual for proper part number identification and proper installation\u003c\/li\u003e\n \u003cli\u003ePlease refer to list for compatibility\u003c\/li\u003e\n \u003c\/ul\u003e"}