{"id":6685630496919,"title":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders","handle":"makita-2-pack-4-5-segmented-rim-diamond-blades-for-4-5-grinders-circular-saws-long-lasting-cutting-for-concrete-masonry-brick-5-8-20mm-7-8-arbors-2-pack-4-5-blades-for-4-5-grinders","description":"\u003ch3\u003eMakita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026amp; Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026amp; Brick - 5\/8”, 20mm \u0026amp; 7\/8” Arbors\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:2 Pack | 4.5\" Blades | For 4.5\"+ Grinders Optimize your concrete, block,\nand brick cutting work with this Makita 2 Pack Premium 4-1\/2” Diamond\nSegmented Blades. Working at a 90-degree angle, perpendicular to the work\nsurface, applying the proper amount of pressure to allow the cutting blade to\ndo the work. For best results, consider not pushing too hard on the blade,\nwhich can cause the grinder to stall or kick back or give a less efficient\ncutting action, while also increasing the chances of slippage or loss of\ncontrol of the tool, resulting in injury or damage and premature wear.\nApplying light to moderate pressure and consistent movement will provide the\nmost efficient cut and minimize heat build-up causing warpage of the blade.\nConsider using light pressure and a consistent motion throughout the cut for\nthe fastest cut-rate and prolonged wheel life. Excessive pressure through the\ncut causes increased friction and heat build-up, which can cause blade warpage\nand reduced wheel life. For demanding applications, higher amperage \u0026amp;\/or\ntorque angle grinders provide easier, long-lasting \u0026amp; efficient cuts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e2 Makita 4-1\/2 Premium Segmented Diamond Blades For Long-Lasting \u0026amp; Reliable 1.25 Depth Concrete, Cinder Block \u0026amp; Brick CUTTING | 4 1\/2\" x 0.79 x 7\/8-Inch Arbor, Optimized for Makita 4-1\/2 Angle Grinders and compatible with All 4-1\/2 Angle Grinders with 5\/8 arbor\u003c\/li\u003e\n \u003cli\u003eCUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands \u0026amp; Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry\u003c\/li\u003e\n \u003cli\u003eRELIABLY \u0026amp; EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block \u0026amp; brick cutting in Wet or Dry conditions over an extra-long life span due to Makitas Premium High Quality Industrial Diamonds, and Makitas proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE \u0026amp; STABILITY, cutting longer and faster than other blades in its class\u003c\/li\u003e\n \u003cli\u003eAVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makitas advanced air flow cooling technology, allowing for safe, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY \u0026amp; INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear\u003c\/li\u003e\n \u003cli\u003eDESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers \u0026amp; general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1\" to 1-1\/4 inch\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:34:16+10:00","created_at":"2021-04-04T17:34:16+10:00","vendor":"Makita","type":"Diamond Blades","tags":["nn05"],"price":17400,"price_min":17400,"price_max":17400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709764780183,"title":"2 Pack | 4.5\" Blades | For 4.5\"+ Grinders","option1":"2 Pack | 4.5\" Blades | For 4.5\"+ Grinders","option2":null,"option3":null,"sku":"B06XPP7TM9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders","public_title":"2 Pack | 4.5\" Blades | For 4.5\"+ Grinders","options":["2 Pack | 4.5\" Blades | For 4.5\"+ Grinders"],"price":17400,"weight":272,"compare_at_price":null,"inventory_management":null,"barcode":"088381313599","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B06XPP7TM9.jpg?v=1651219666","\/\/newnestshop.com\/cdn\/shop\/products\/711Pfo2RA5L.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/71kCO7XM5EL.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/61MFqWB4-RL.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/71dEqk3ZSNL.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/71c_2B4KxZXhL.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/71m3gAlBm5L.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/712BZQbjWQL.jpg?v=1622430401","\/\/newnestshop.com\/cdn\/shop\/products\/818iLKWMqFL.jpg?v=1622430401"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B06XPP7TM9.jpg?v=1651219666","options":["Size"],"media":[{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":27767147004055,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06XPP7TM9.jpg?v=1651219666"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06XPP7TM9.jpg?v=1651219666","width":1500},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239779852439,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/711Pfo2RA5L.jpg?v=1622430401"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/711Pfo2RA5L.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239779885207,"position":3,"preview_image":{"aspect_ratio":1.6,"height":800,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71kCO7XM5EL.jpg?v=1622430401"},"aspect_ratio":1.6,"height":800,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71kCO7XM5EL.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239779917975,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61MFqWB4-RL.jpg?v=1622430401"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61MFqWB4-RL.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239779950743,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71dEqk3ZSNL.jpg?v=1622430401"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71dEqk3ZSNL.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239779983511,"position":6,"preview_image":{"aspect_ratio":1.001,"height":1279,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71c_2B4KxZXhL.jpg?v=1622430401"},"aspect_ratio":1.001,"height":1279,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71c_2B4KxZXhL.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239780016279,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71m3gAlBm5L.jpg?v=1622430401"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71m3gAlBm5L.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239780049047,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/712BZQbjWQL.jpg?v=1622430401"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/712BZQbjWQL.jpg?v=1622430401","width":1280},{"alt":"Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026 Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026 Brick - 5\/8”, 20mm \u0026 7\/8” Arbors 2 Pack | 4.5\" Blades | For 4.5\"+ Grinders - NewNest Australia","id":21239780081815,"position":9,"preview_image":{"aspect_ratio":1.779,"height":1439,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/818iLKWMqFL.jpg?v=1622430401"},"aspect_ratio":1.779,"height":1439,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/818iLKWMqFL.jpg?v=1622430401","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMakita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders \u0026amp; Circular Saws - Long-Lasting Cutting For Concrete, Masonry \u0026amp; Brick - 5\/8”, 20mm \u0026amp; 7\/8” Arbors\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:2 Pack | 4.5\" Blades | For 4.5\"+ Grinders Optimize your concrete, block,\nand brick cutting work with this Makita 2 Pack Premium 4-1\/2” Diamond\nSegmented Blades. Working at a 90-degree angle, perpendicular to the work\nsurface, applying the proper amount of pressure to allow the cutting blade to\ndo the work. For best results, consider not pushing too hard on the blade,\nwhich can cause the grinder to stall or kick back or give a less efficient\ncutting action, while also increasing the chances of slippage or loss of\ncontrol of the tool, resulting in injury or damage and premature wear.\nApplying light to moderate pressure and consistent movement will provide the\nmost efficient cut and minimize heat build-up causing warpage of the blade.\nConsider using light pressure and a consistent motion throughout the cut for\nthe fastest cut-rate and prolonged wheel life. Excessive pressure through the\ncut causes increased friction and heat build-up, which can cause blade warpage\nand reduced wheel life. For demanding applications, higher amperage \u0026amp;\/or\ntorque angle grinders provide easier, long-lasting \u0026amp; efficient cuts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e2 Makita 4-1\/2 Premium Segmented Diamond Blades For Long-Lasting \u0026amp; Reliable 1.25 Depth Concrete, Cinder Block \u0026amp; Brick CUTTING | 4 1\/2\" x 0.79 x 7\/8-Inch Arbor, Optimized for Makita 4-1\/2 Angle Grinders and compatible with All 4-1\/2 Angle Grinders with 5\/8 arbor\u003c\/li\u003e\n \u003cli\u003eCUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands \u0026amp; Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry\u003c\/li\u003e\n \u003cli\u003eRELIABLY \u0026amp; EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block \u0026amp; brick cutting in Wet or Dry conditions over an extra-long life span due to Makitas Premium High Quality Industrial Diamonds, and Makitas proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE \u0026amp; STABILITY, cutting longer and faster than other blades in its class\u003c\/li\u003e\n \u003cli\u003eAVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makitas advanced air flow cooling technology, allowing for safe, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY \u0026amp; INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear\u003c\/li\u003e\n \u003cli\u003eDESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers \u0026amp; general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1\" to 1-1\/4 inch\u003c\/li\u003e\n \u003c\/ul\u003e"}
Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors 2 Pack | 4.5" Blades | For 4.5"+ Grinders
Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors
Size:2 Pack | 4.5" Blades | For 4.5"+ Grinders Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Segmented Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.
Product Features
- 2 Makita 4-1/2 Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25 Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2 Angle Grinders and compatible with All 4-1/2 Angle Grinders with 5/8 arbor
- CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
- RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makitas Premium High Quality Industrial Diamonds, and Makitas proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class
- AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makitas advanced air flow cooling technology, allowing for safe, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear
- DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1" to 1-1/4 inch
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.
Related Products
3Pc. 2" x 100T x 3/8"...
$107.00 AUD
{"id":6689054883991,"title":"3Pc. 2\" x 100T x 3\/8\" HSS Blade for Mini High Speed Miter Cut Off Saw","handle":"3pc-2-x-100t-x-3-8-hss-blade-for-mini-high-speed-miter-cut-off-saw","description":"\u003ch3\u003e3Pc. 2\" x 100T x 3\/8\" HSS Blade for Mini High Speed Miter Cut Off Saw\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e3PACK REPLACEMENT BLADES FOR TRUE POWER HIGH SPEED MINI CUT-OFF SAW 919\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100 TOOTH M2 HIGH SPEED STEEL\u003c\/li\u003e\n \u003cli\u003eMAX RPM: 13,000\u003c\/li\u003e\n \u003cli\u003e3\/8\" ARBOR\u003c\/li\u003e\n \u003cli\u003e2\" DIAMETER\u003c\/li\u003e\n \u003cli\u003e0.5mm KERF (Width)\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T20:12:56+10:00","created_at":"2021-04-05T20:12:56+10:00","vendor":"TruePower","type":"Miter Saw Blades","tags":["nn05"],"price":10700,"price_min":10700,"price_max":10700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39718050726039,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00BL7R4HS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3Pc. 2\" x 100T x 3\/8\" HSS Blade for Mini High Speed Miter Cut Off Saw","public_title":null,"options":["Default Title"],"price":10700,"weight":24,"compare_at_price":null,"inventory_management":null,"barcode":"870208999198","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00BL7R4HS.jpg?v=1651226204"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00BL7R4HS.jpg?v=1651226204","options":["Title"],"media":[{"alt":"3Pc. 2\" x 100T x 3\/8\" HSS Blade for Mini High Speed Miter Cut Off Saw - NewNest Australia","id":27768683757719,"position":1,"preview_image":{"aspect_ratio":1.06,"height":1074,"width":1138,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00BL7R4HS.jpg?v=1651226204"},"aspect_ratio":1.06,"height":1074,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00BL7R4HS.jpg?v=1651226204","width":1138}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e3Pc. 2\" x 100T x 3\/8\" HSS Blade for Mini High Speed Miter Cut Off Saw\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e3PACK REPLACEMENT BLADES FOR TRUE POWER HIGH SPEED MINI CUT-OFF SAW 919\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100 TOOTH M2 HIGH SPEED STEEL\u003c\/li\u003e\n \u003cli\u003eMAX RPM: 13,000\u003c\/li\u003e\n \u003cli\u003e3\/8\" ARBOR\u003c\/li\u003e\n \u003cli\u003e2\" DIAMETER\u003c\/li\u003e\n \u003cli\u003e0.5mm KERF (Width)\u003c\/li\u003e\n \u003c\/ul\u003e"}
3Pc. 2" x 100T x 3/8" HSS Blade for Mini High Speed Miter Cut Off Saw
$107.00 AUD
3Pc. 2" x 100T x 3/8" HSS Blade for Mini High Speed Miter Cut Off Saw 3PACK REPLACEMENT BLADES FOR TRUE POWER HIGH SPEED MINI CUT-OFF SAW 919 Product Features 100 TOOTH M2 HIGH SPEED STEEL MAX RPM: 13,000 3/8" ARBOR 2" DIAMETER 0.5mm KERF (Width)
4.5 Inch Super Thin Diamond Tile...
$105.00 AUD
{"id":6689054261399,"title":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\"","handle":"4-5-inch-super-thin-diamond-tile-blade-porcelain-cutting-blade-for-cutting-granite-marble-ceramics-porcelain-tiles4-5-4-5","description":"\u003ch3\u003e4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\")\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4.5\" Products Name: Porcelain saw blade Size: 4.5 inch Arbor: 22.23 mm\nThickness: 1.2 mm Segment Height: 10mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUniversal for dry or wet cutting\u003c\/li\u003e\n \u003cli\u003eX teeth offer fast and smooth cutting\u003c\/li\u003e\n \u003cli\u003eHigh temperature extraction diamond blade has a long service life.\u003c\/li\u003e\n \u003cli\u003eSuper thin porcelain saw blade with free chips for cutting,Match with hand-held machine\u003c\/li\u003e\n \u003cli\u003eAvailable for cutting porcelain,ceramic tile,granite, sandstone quartz ect\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T20:12:39+10:00","created_at":"2021-04-05T20:12:39+10:00","vendor":"ostek","type":"Diamond Blades","tags":["nn05"],"price":10500,"price_min":10500,"price_max":10500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39718049349783,"title":"4.5\"","option1":"4.5\"","option2":null,"option3":null,"sku":"B07Y1PNK11","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - 4.5\"","public_title":"4.5\"","options":["4.5\""],"price":10500,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1PNK11.jpg?v=1651226181","\/\/newnestshop.com\/cdn\/shop\/products\/71WrLzgEyVL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/71gZjEpjHFL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/71HB06XbfJL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/71ORCJFsWkL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/51XOvHQiOmL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/71VEKUW8SBL.jpg?v=1622436817","\/\/newnestshop.com\/cdn\/shop\/products\/718BEeZT7bL.jpg?v=1622436817"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1PNK11.jpg?v=1651226181","options":["Size"],"media":[{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":27768682119319,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1PNK11.jpg?v=1651226181"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1PNK11.jpg?v=1651226181","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503732375,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71WrLzgEyVL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71WrLzgEyVL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503765143,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71gZjEpjHFL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71gZjEpjHFL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503797911,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HB06XbfJL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HB06XbfJL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503830679,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ORCJFsWkL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ORCJFsWkL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503863447,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51XOvHQiOmL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51XOvHQiOmL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503896215,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71VEKUW8SBL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71VEKUW8SBL.jpg?v=1622436817","width":1000},{"alt":"4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\") 4.5\" - NewNest Australia","id":21252503928983,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/718BEeZT7bL.jpg?v=1622436817"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/718BEeZT7bL.jpg?v=1622436817","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5\")\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4.5\" Products Name: Porcelain saw blade Size: 4.5 inch Arbor: 22.23 mm\nThickness: 1.2 mm Segment Height: 10mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUniversal for dry or wet cutting\u003c\/li\u003e\n \u003cli\u003eX teeth offer fast and smooth cutting\u003c\/li\u003e\n \u003cli\u003eHigh temperature extraction diamond blade has a long service life.\u003c\/li\u003e\n \u003cli\u003eSuper thin porcelain saw blade with free chips for cutting,Match with hand-held machine\u003c\/li\u003e\n \u003cli\u003eAvailable for cutting porcelain,ceramic tile,granite, sandstone quartz ect\u003c\/li\u003e\n \u003c\/ul\u003e"}
4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5") 4.5"
$105.00 AUD
4.5 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade for Cutting Granite Marble Ceramics Porcelain Tiles(4.5") Size:4.5" Products Name: Porcelain saw blade Size: 4.5 inch Arbor: 22.23 mm Thickness: 1.2 mm Segment Height: 10mm Product Features Universal for dry or wet cutting X teeth offer fast and smooth cutting ...
Irwin 11820ZR 6-1/2-Inch 140 Too...
$125.00 AUD
{"id":6685701144727,"title":"Irwin 11820ZR 6-1\/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch Arbor 6-1\/2\" 140T Classic","handle":"irwin-11820zr-6-1-2-inch-140-tooth-tfg-plastic-plywood-and-veneer-cutting-saw-blade-with-5-8-inch-arbor-6-1-2-140t-classic","description":"\u003ch3\u003eIrwin 11820ZR 6-1\/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch Arbor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-1\/2\" 140T | Style:Classic Irwin 11820ZR 6-1\/2-Inch\n140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch\nArbor From the Manufacturer IRWIN 6-1\/2\" x 140T Plywood\/OSB\/Veneer\/Plastic,\nUniversal Arbor - a circular saw blade that features precision ground teeth\nfor smooth and accurate cuts each time it is used. Offers a fully hardened\nplate that runs truer, longer. This blade is made of heavy gauge high carbon\nsteel for extended life and features a 5\/8 inch Arbor w\/ diamond knockout.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision ground teeth for smooth, accurate cuts\u003c\/li\u003e\n \u003cli\u003eFully Hardened plate runs truer longer\u003c\/li\u003e\n \u003cli\u003eHeavy gauge high carbon steel for extended life\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T18:04:42+10:00","created_at":"2021-04-04T18:04:42+10:00","vendor":"Irwin Tools","type":"Miter Saw Blades","tags":["nn05"],"price":12500,"price_min":12500,"price_max":12500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709955358871,"title":"6-1\/2\" 140T \/ Classic","option1":"6-1\/2\" 140T","option2":"Classic","option3":null,"sku":"B0002UKS7S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Irwin 11820ZR 6-1\/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch Arbor 6-1\/2\" 140T Classic - 6-1\/2\" 140T \/ Classic","public_title":"6-1\/2\" 140T \/ Classic","options":["6-1\/2\" 140T","Classic"],"price":12500,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"024721118202","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0002UKS7S.jpg?v=1651221435"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002UKS7S.jpg?v=1651221435","options":["Size","Style"],"media":[{"alt":"Irwin 11820ZR 6-1\/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch Arbor 6-1\/2\" 140T Classic - NewNest Australia","id":27767775428759,"position":1,"preview_image":{"aspect_ratio":0.605,"height":2560,"width":1549,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002UKS7S.jpg?v=1651221435"},"aspect_ratio":0.605,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0002UKS7S.jpg?v=1651221435","width":1549}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eIrwin 11820ZR 6-1\/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch Arbor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6-1\/2\" 140T | Style:Classic Irwin 11820ZR 6-1\/2-Inch\n140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5\/8-Inch\nArbor From the Manufacturer IRWIN 6-1\/2\" x 140T Plywood\/OSB\/Veneer\/Plastic,\nUniversal Arbor - a circular saw blade that features precision ground teeth\nfor smooth and accurate cuts each time it is used. Offers a fully hardened\nplate that runs truer, longer. This blade is made of heavy gauge high carbon\nsteel for extended life and features a 5\/8 inch Arbor w\/ diamond knockout.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision ground teeth for smooth, accurate cuts\u003c\/li\u003e\n \u003cli\u003eFully Hardened plate runs truer longer\u003c\/li\u003e\n \u003cli\u003eHeavy gauge high carbon steel for extended life\u003c\/li\u003e\n \u003c\/ul\u003e"}
Irwin 11820ZR 6-1/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5/8-Inch Arbor 6-1/2" 140T Classic
$125.00 AUD
Irwin 11820ZR 6-1/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5/8-Inch Arbor Size:6-1/2" 140T | Style:Classic Irwin 11820ZR 6-1/2-Inch 140 Tooth TFG Plastic, Plywood, and Veneer Cutting Saw Blade with 5/8-Inch Arbor From the Manufacturer IRWIN 6-1/2" x 140T Plywood/OSB/Veneer/Plastic, Universal Arbor - a circular sa...
DEWALT Portable Band Saw Blade, ...
$150.00 AUD
{"id":6685666902167,"title":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack","handle":"dewalt-portable-band-saw-blade-32-7-8-inch-020-inch-24-tpi-3-pack-dw3984c-basic-pack","description":"\u003ch3\u003eDEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:Basic pack From the Manufacturer DEWALT Bi-Metal portable bandsaw blades\nincorporate the Matrix II High Speed Steel Edge for heat and wear resistance.\nThese blades have an 8% cobalt content for added durability and wear. Rc 65-67\ntooth hardness also increases wear resistance. The have an alloy steel backer\nfor fatigue resistance. Applications include thick metal, medium metal and\nthin gauge metal cutting. Package of 3 32-7\/8-Inch blades.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMatrix II High Speed Steel Edge for Heat and Wear Resistance\u003c\/li\u003e\n \u003cli\u003e8% Cobalt Content For Added Durability \u0026amp; Wear. Alloy Steel Backer for Fatigue Resistance\u003c\/li\u003e\n \u003cli\u003eRc 65-67 Tooth Hardness For Increased Wear Resistance\u003c\/li\u003e\n \u003cli\u003eCordless bandsaw blades are ideal for thick metal, medium metal, and thin gauge metal cutting\u003c\/li\u003e\n \u003cli\u003eSize: 32-7\/8\" x 0.020\" 24 TPI\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:48:48+10:00","created_at":"2021-04-04T17:48:48+10:00","vendor":"DEWALT","type":"Band Saw Blades","tags":["nn05"],"price":15000,"price_min":15000,"price_max":15000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709888905367,"title":"Basic pack","option1":"Basic pack","option2":null,"option3":null,"sku":"B005IW2OUY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack - Basic pack","public_title":"Basic pack","options":["Basic pack"],"price":15000,"weight":159,"compare_at_price":null,"inventory_management":null,"barcode":"885911245739","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B005IW2OUY.jpg?v=1651220499","\/\/newnestshop.com\/cdn\/shop\/products\/61gf9zmTu4L.jpg?v=1622431250","\/\/newnestshop.com\/cdn\/shop\/products\/71HtSLQFDvL.jpg?v=1622431250","\/\/newnestshop.com\/cdn\/shop\/products\/81YISkdZVcL.jpg?v=1622431250"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B005IW2OUY.jpg?v=1651220499","options":["Color"],"media":[{"alt":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack - NewNest Australia","id":27767306322071,"position":1,"preview_image":{"aspect_ratio":1.34,"height":1911,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B005IW2OUY.jpg?v=1651220499"},"aspect_ratio":1.34,"height":1911,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B005IW2OUY.jpg?v=1651220499","width":2560},{"alt":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack - NewNest Australia","id":21239963680919,"position":2,"preview_image":{"aspect_ratio":3.126,"height":819,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61gf9zmTu4L.jpg?v=1622431250"},"aspect_ratio":3.126,"height":819,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61gf9zmTu4L.jpg?v=1622431250","width":2560},{"alt":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack - NewNest Australia","id":21239963713687,"position":3,"preview_image":{"aspect_ratio":0.388,"height":2560,"width":993,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HtSLQFDvL.jpg?v=1622431250"},"aspect_ratio":0.388,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71HtSLQFDvL.jpg?v=1622431250","width":993},{"alt":"DEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack - NewNest Australia","id":21239963746455,"position":4,"preview_image":{"aspect_ratio":0.371,"height":2560,"width":949,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81YISkdZVcL.jpg?v=1622431250"},"aspect_ratio":0.371,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81YISkdZVcL.jpg?v=1622431250","width":949}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDEWALT Portable Band Saw Blade, 32-7\/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:Basic pack From the Manufacturer DEWALT Bi-Metal portable bandsaw blades\nincorporate the Matrix II High Speed Steel Edge for heat and wear resistance.\nThese blades have an 8% cobalt content for added durability and wear. Rc 65-67\ntooth hardness also increases wear resistance. The have an alloy steel backer\nfor fatigue resistance. Applications include thick metal, medium metal and\nthin gauge metal cutting. Package of 3 32-7\/8-Inch blades.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMatrix II High Speed Steel Edge for Heat and Wear Resistance\u003c\/li\u003e\n \u003cli\u003e8% Cobalt Content For Added Durability \u0026amp; Wear. Alloy Steel Backer for Fatigue Resistance\u003c\/li\u003e\n \u003cli\u003eRc 65-67 Tooth Hardness For Increased Wear Resistance\u003c\/li\u003e\n \u003cli\u003eCordless bandsaw blades are ideal for thick metal, medium metal, and thin gauge metal cutting\u003c\/li\u003e\n \u003cli\u003eSize: 32-7\/8\" x 0.020\" 24 TPI\u003c\/li\u003e\n \u003c\/ul\u003e"}
DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Basic pack
$150.00 AUD
DEWALT Portable Band Saw Blade, 32-7/8-Inch, .020-Inch, 24 TPI, 3-Pack (DW3984C) Color:Basic pack From the Manufacturer DEWALT Bi-Metal portable bandsaw blades incorporate the Matrix II High Speed Steel Edge for heat and wear resistance. These blades have an 8% cobalt content for added durability and wear. Rc 65-67 tooth hardness also increases ...
Lenox Tools 656R Reciprocating 6...
$95.00 AUD
{"id":6685664936087,"title":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi","handle":"lenox-tools-656r-reciprocating-6x3-4x6-20572656r-pack-of-5-150mm-6tpi","description":"\u003ch3\u003eLenox Tools 656R Reciprocating 6X3\/4X6 (20572656R)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:Pack of 5 150mm 6tpi LENOX Wood Bi-Metal\nReciprocating Saw Blades feature T2 technology with an optimized and\nreinforced tooth geometry to help extend the blade life. The durable saw blade\nconstruction uses a bi-metal design to stand up to the most demanding\napplications. 7500 P.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer American Saw's Lenox Reciprocating Saw Blades feature bi-metal\nconstruction, an 8-percent cobalt edge, precision milled teeth, a too hardness\nof Rc65-66, and an angled tang. These blades are shatter resistant, with a\nhigh wear and heat resistance. Their shock resistant teeth provide a more\naggressive cut. This model has 6 teeth per inch, measures 6 inches by 3\/4-inch\nby .050, and is intended for rough work in wood (including nail-embedded\nwood), fast cutting, and use in remodeling and demolition work. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEach saw blade uses T2 technology for extended life\u003c\/li\u003e\n \u003cli\u003e0\u003c\/li\u003e\n \u003cli\u003eBi-metal saw blade design stands up to the most demanding applications\u003c\/li\u003e\n \u003cli\u003e6 TPI\u003c\/li\u003e\n \u003cli\u003e6\" x 3\/4\" x 0.050\"\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:48:22+10:00","created_at":"2021-04-04T17:48:22+10:00","vendor":"Lenox Tools","type":"Reciprocating Saw Blades","tags":["nn05"],"price":9500,"price_min":9500,"price_max":9500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709887496343,"title":"Pack of 5 150mm 6tpi","option1":"Pack of 5 150mm 6tpi","option2":null,"option3":null,"sku":"B0000224T1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - Pack of 5 150mm 6tpi","public_title":"Pack of 5 150mm 6tpi","options":["Pack of 5 150mm 6tpi"],"price":9500,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"082472205725","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0000224T1.jpg?v=1651220466","\/\/newnestshop.com\/cdn\/shop\/products\/715z9ttgNdL.jpg?v=1622431217","\/\/newnestshop.com\/cdn\/shop\/products\/7162_2BFjRrsL.jpg?v=1622431217","\/\/newnestshop.com\/cdn\/shop\/products\/71phhIThVzL.jpg?v=1622431217","\/\/newnestshop.com\/cdn\/shop\/products\/81fjtAxl8oL.jpg?v=1622431217"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000224T1.jpg?v=1651220466","options":["Size"],"media":[{"alt":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - NewNest Australia","id":27767301472407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000224T1.jpg?v=1651220466"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000224T1.jpg?v=1651220466","width":2560},{"alt":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - NewNest Australia","id":21239958995095,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/715z9ttgNdL.jpg?v=1622431217"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/715z9ttgNdL.jpg?v=1622431217","width":2560},{"alt":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - NewNest Australia","id":21239959027863,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/7162_2BFjRrsL.jpg?v=1622431217"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/7162_2BFjRrsL.jpg?v=1622431217","width":2560},{"alt":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - NewNest Australia","id":21239959060631,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71phhIThVzL.jpg?v=1622431217"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71phhIThVzL.jpg?v=1622431217","width":2560},{"alt":"Lenox Tools 656R Reciprocating 6X3\/4X6 (20572656R) Pack of 5 150mm 6tpi - NewNest Australia","id":21239959093399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81fjtAxl8oL.jpg?v=1622431217"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81fjtAxl8oL.jpg?v=1622431217","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eLenox Tools 656R Reciprocating 6X3\/4X6 (20572656R)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:Pack of 5 150mm 6tpi LENOX Wood Bi-Metal\nReciprocating Saw Blades feature T2 technology with an optimized and\nreinforced tooth geometry to help extend the blade life. The durable saw blade\nconstruction uses a bi-metal design to stand up to the most demanding\napplications. 7500 P.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer American Saw's Lenox Reciprocating Saw Blades feature bi-metal\nconstruction, an 8-percent cobalt edge, precision milled teeth, a too hardness\nof Rc65-66, and an angled tang. These blades are shatter resistant, with a\nhigh wear and heat resistance. Their shock resistant teeth provide a more\naggressive cut. This model has 6 teeth per inch, measures 6 inches by 3\/4-inch\nby .050, and is intended for rough work in wood (including nail-embedded\nwood), fast cutting, and use in remodeling and demolition work. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEach saw blade uses T2 technology for extended life\u003c\/li\u003e\n \u003cli\u003e0\u003c\/li\u003e\n \u003cli\u003eBi-metal saw blade design stands up to the most demanding applications\u003c\/li\u003e\n \u003cli\u003e6 TPI\u003c\/li\u003e\n \u003cli\u003e6\" x 3\/4\" x 0.050\"\u003c\/li\u003e\n \u003c\/ul\u003e"}
Lenox Tools 656R Reciprocating 6X3/4X6 (20572656R) Pack of 5 150mm 6tpi
$95.00 AUD
Lenox Tools 656R Reciprocating 6X3/4X6 (20572656R) Size:Pack of 5 150mm 6tpi LENOX Wood Bi-Metal Reciprocating Saw Blades feature T2 technology with an optimized and reinforced tooth geometry to help extend the blade life. The durable saw blade construction uses a bi-metal design to stand up to the most demanding applications. 7500 P.when('A')...
Bosch RAP7PK 7-Piece Reciprocati...
$127.00 AUD
{"id":6685567156375,"title":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set","handle":"bosch-rap7pk-7-piece-reciprocating-saw-blade-set","description":"\u003ch3\u003eBosch RAP7PK 7-Piece Reciprocating Saw Blade Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Bosch All-Purpose Reciprocating Saw Blade Set features blades made with\nbi-metal and high carbon steel construction, delivering maximum life and\ndurability in heavy use. These blades feature teeth that are optimized for\ncutting efficiency. The kit features a variety of blades designed for key\nprofessional applications. The blades will tackle wood, wood with nails,\nmetal, plastic and PVC. These recip blades feature precision-ground teeth\ndesigned for fast cutting, high performance and staying sharp longer. By\nincorporating high-quality materials, best manufacturing processes and proven\ntooth-design features, Bosch provides professional reciprocating saw blades\nthat cut faster and last longer.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWood reciprocating saw blades : incorporate high quality materials and optimized 6 TPI tooth design for professional blades that cut faster and last longer\u003c\/li\u003e\n \u003cli\u003eMetal Reciprocating Saw Blades : incorporate bi metal construction, reinforced pair setting teeth and thin kerf .035 In. bodies for pro quality high performance\u003c\/li\u003e\n \u003cli\u003eReciprocating saw blades designed for wood with nails : incorporate bi metal construction, reinforced 5\/8 variable pitch teeth for fast cutting and taper backs and plunge tips for easy starts\u003c\/li\u003e\n \u003cli\u003eDemolition reciprocating saw blades : combine bi metal construction, reinforced 10\/14 variable tooth pitch for fast cutting\u003c\/li\u003e\n \u003cli\u003eBi-metal material : delivers a hardened cutting edge for outstanding blade durability\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:07:48+10:00","created_at":"2021-04-04T17:07:48+10:00","vendor":"BOSCH","type":"Reciprocating Saw Blades","tags":["nn05"],"price":12700,"price_min":12700,"price_max":12700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709578002583,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00POLZRCQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set","public_title":null,"options":["Default Title"],"price":12700,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":"000346458176","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00POLZRCQ.jpg?v=1651218062","\/\/newnestshop.com\/cdn\/shop\/products\/81jpkP97woL.jpg?v=1622428830","\/\/newnestshop.com\/cdn\/shop\/products\/81OEHjmzekL.jpg?v=1622428830","\/\/newnestshop.com\/cdn\/shop\/products\/61CnS5viDfL.jpg?v=1622428830","\/\/newnestshop.com\/cdn\/shop\/products\/7142YI4TvML.jpg?v=1622428830"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00POLZRCQ.jpg?v=1651218062","options":["Title"],"media":[{"alt":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set - NewNest Australia","id":27766938599575,"position":1,"preview_image":{"aspect_ratio":0.472,"height":2560,"width":1208,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00POLZRCQ.jpg?v=1651218062"},"aspect_ratio":0.472,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00POLZRCQ.jpg?v=1651218062","width":1208},{"alt":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set - NewNest Australia","id":21239424286871,"position":2,"preview_image":{"aspect_ratio":0.477,"height":2560,"width":1220,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81jpkP97woL.jpg?v=1622428830"},"aspect_ratio":0.477,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81jpkP97woL.jpg?v=1622428830","width":1220},{"alt":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set - NewNest Australia","id":21239424319639,"position":3,"preview_image":{"aspect_ratio":0.782,"height":2560,"width":2002,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81OEHjmzekL.jpg?v=1622428830"},"aspect_ratio":0.782,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81OEHjmzekL.jpg?v=1622428830","width":2002},{"alt":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set - NewNest Australia","id":21239424352407,"position":4,"preview_image":{"aspect_ratio":0.929,"height":1204,"width":1119,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61CnS5viDfL.jpg?v=1622428830"},"aspect_ratio":0.929,"height":1204,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61CnS5viDfL.jpg?v=1622428830","width":1119},{"alt":"Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set - NewNest Australia","id":21239424385175,"position":5,"preview_image":{"aspect_ratio":1.315,"height":1947,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/7142YI4TvML.jpg?v=1622428830"},"aspect_ratio":1.315,"height":1947,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/7142YI4TvML.jpg?v=1622428830","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBosch RAP7PK 7-Piece Reciprocating Saw Blade Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Bosch All-Purpose Reciprocating Saw Blade Set features blades made with\nbi-metal and high carbon steel construction, delivering maximum life and\ndurability in heavy use. These blades feature teeth that are optimized for\ncutting efficiency. The kit features a variety of blades designed for key\nprofessional applications. The blades will tackle wood, wood with nails,\nmetal, plastic and PVC. These recip blades feature precision-ground teeth\ndesigned for fast cutting, high performance and staying sharp longer. By\nincorporating high-quality materials, best manufacturing processes and proven\ntooth-design features, Bosch provides professional reciprocating saw blades\nthat cut faster and last longer.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWood reciprocating saw blades : incorporate high quality materials and optimized 6 TPI tooth design for professional blades that cut faster and last longer\u003c\/li\u003e\n \u003cli\u003eMetal Reciprocating Saw Blades : incorporate bi metal construction, reinforced pair setting teeth and thin kerf .035 In. bodies for pro quality high performance\u003c\/li\u003e\n \u003cli\u003eReciprocating saw blades designed for wood with nails : incorporate bi metal construction, reinforced 5\/8 variable pitch teeth for fast cutting and taper backs and plunge tips for easy starts\u003c\/li\u003e\n \u003cli\u003eDemolition reciprocating saw blades : combine bi metal construction, reinforced 10\/14 variable tooth pitch for fast cutting\u003c\/li\u003e\n \u003cli\u003eBi-metal material : delivers a hardened cutting edge for outstanding blade durability\u003c\/li\u003e\n \u003c\/ul\u003e"}
Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set
$127.00 AUD
Bosch RAP7PK 7-Piece Reciprocating Saw Blade Set The Bosch All-Purpose Reciprocating Saw Blade Set features blades made with bi-metal and high carbon steel construction, delivering maximum life and durability in heavy use. These blades feature teeth that are optimized for cutting efficiency. The kit features a variety of blades designed for key ...
PORTER-CABLE 4-1/2-Inch Circular...
$100.00 AUD
{"id":6696940830871,"title":"PORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT)","handle":"porter-cable-4-1-2-inch-circular-saw-blade-24-tooth-pc412tct","description":"\u003ch3\u003ePORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe PORTER-CABLE PC412TCT 4-1\/2\" 24T TCT saw blade is designed exclusively for\nthe Porter cable Pce381 corded Circular saw. It features carbide teeth for\nlong blade life, with a 3\/8\" Arbor. This is a general Purpose wood cutting saw\nblade.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExclusive blade for the PORTER-CABLE Pce381 corded circular saw\u003c\/li\u003e\n \u003cli\u003eCarbide teeth for long blade life\u003c\/li\u003e\n \u003cli\u003e3\/8\" arbor\u003c\/li\u003e\n \u003cli\u003eGeneral purpose wood cutting saw blade\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:34:52+10:00","created_at":"2021-04-07T23:34:52+10:00","vendor":"PORTER-CABLE","type":"Circular Saw Blades","tags":["nn05"],"price":10000,"price_min":10000,"price_max":10000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735987765399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00SOU5TC2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT)","public_title":null,"options":["Default Title"],"price":10000,"weight":118,"compare_at_price":null,"inventory_management":null,"barcode":"885911523226","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00SOU5TC2.jpg?v=1651235225","\/\/newnestshop.com\/cdn\/shop\/products\/71zma_2BXXjuL.jpg?v=1622445865"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00SOU5TC2.jpg?v=1651235225","options":["Title"],"media":[{"alt":"PORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT) - NewNest Australia","id":27770509426839,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00SOU5TC2.jpg?v=1651235225"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00SOU5TC2.jpg?v=1651235225","width":1000},{"alt":"PORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT) - NewNest Australia","id":21309232939159,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71zma_2BXXjuL.jpg?v=1622445865"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71zma_2BXXjuL.jpg?v=1622445865","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePORTER-CABLE 4-1\/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe PORTER-CABLE PC412TCT 4-1\/2\" 24T TCT saw blade is designed exclusively for\nthe Porter cable Pce381 corded Circular saw. It features carbide teeth for\nlong blade life, with a 3\/8\" Arbor. This is a general Purpose wood cutting saw\nblade.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExclusive blade for the PORTER-CABLE Pce381 corded circular saw\u003c\/li\u003e\n \u003cli\u003eCarbide teeth for long blade life\u003c\/li\u003e\n \u003cli\u003e3\/8\" arbor\u003c\/li\u003e\n \u003cli\u003eGeneral purpose wood cutting saw blade\u003c\/li\u003e\n \u003c\/ul\u003e"}
PORTER-CABLE 4-1/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT)
$100.00 AUD
PORTER-CABLE 4-1/2-Inch Circular Saw Blade, 24-Tooth (PC412TCT) The PORTER-CABLE PC412TCT 4-1/2" 24T TCT saw blade is designed exclusively for the Porter cable Pce381 corded Circular saw. It features carbide teeth for long blade life, with a 3/8" Arbor. This is a general Purpose wood cutting saw blade. Product Features Exclusive bl...
Piranha 7-inch (7") Continuous R...
$185.00 AUD
{"id":6696934277271,"title":"Piranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026 Similar Materials","handle":"piranha-7-inch-7-continuous-rim-wet-dry-diamond-blade-for-cutting-porcelain-tile-ceramic-tile-stone-similar-materials","description":"\u003ch3\u003ePiranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026amp; Similar Materials\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePiranha 7-inch (7\") continuous rim wet\/dry diamond blades are made with GE\nSuperabrasive diamonds and are used for cutting a wide range of materials\nincluding ceramic tile, porcelain tile, stone or anything similar. Specs are\n7\" diameter X .060 thick with a diamond-7\/8\"-5\/8\" universal arbor for all tile\nsaws, circular saws and hand-held grinders. The thin (.060) cutting rim allows\nfor the best combination of cutting speed and blade life while producing a\nfirst-class cut! The diamond rim is also 10mm tall which maximizes cutting\nlife and achieves a low cost per cut. Recommended operating speed is 5,100\nRPM. Expected blade life is approximately 600 linear feet.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis general purpose diamond blade is used for cutting a wide range of materials including ceramic tile, porcelain tile, granite, marble, slate, terrazzo or anything similar.\u003c\/li\u003e\n \u003cli\u003eSpecs are 7\" diameter X .060 thick with a diamond-7\/8\"-5\/8\" universal arbor for all tile saws, circular saws and hand-held grinders.\u003c\/li\u003e\n \u003cli\u003eThe core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.\u003c\/li\u003e\n \u003cli\u003eThe thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! It is also 10mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 5,100 RPM.\u003c\/li\u003e\n \u003cli\u003eThis top-quality product is made in USA and backed with a 100% lifetime warranty plus free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended use), or if the bond between the diamond rim and the steel core becomes separated at any time, it will be replaced free of charge!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:33:51+10:00","created_at":"2021-04-07T23:33:51+10:00","vendor":"Delta Diamond Products, Inc","type":"Diamond Blades","tags":["nn05"],"price":18500,"price_min":18500,"price_max":18500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735975936151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B077F5W75P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Piranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026 Similar Materials","public_title":null,"options":["Default Title"],"price":18500,"weight":544,"compare_at_price":null,"inventory_management":null,"barcode":"040232407338","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B077F5W75P.jpg?v=1651235193","\/\/newnestshop.com\/cdn\/shop\/products\/A1SPlv6LoKL.jpg?v=1622445825","\/\/newnestshop.com\/cdn\/shop\/products\/71Ma8kW8VeL.jpg?v=1622445825"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B077F5W75P.jpg?v=1651235193","options":["Title"],"media":[{"alt":"Piranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026 Similar Materials - NewNest Australia","id":27770489438359,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2400,"width":2400,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B077F5W75P.jpg?v=1651235193"},"aspect_ratio":1.0,"height":2400,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B077F5W75P.jpg?v=1651235193","width":2400},{"alt":"Piranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026 Similar Materials - NewNest Australia","id":21309189652631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2400,"width":2400,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/A1SPlv6LoKL.jpg?v=1622445825"},"aspect_ratio":1.0,"height":2400,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/A1SPlv6LoKL.jpg?v=1622445825","width":2400},{"alt":"Piranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026 Similar Materials - NewNest Australia","id":21309189685399,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2400,"width":2400,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Ma8kW8VeL.jpg?v=1622445825"},"aspect_ratio":1.0,"height":2400,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Ma8kW8VeL.jpg?v=1622445825","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePiranha 7-inch (7\") Continuous Rim Wet\/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone \u0026amp; Similar Materials\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePiranha 7-inch (7\") continuous rim wet\/dry diamond blades are made with GE\nSuperabrasive diamonds and are used for cutting a wide range of materials\nincluding ceramic tile, porcelain tile, stone or anything similar. Specs are\n7\" diameter X .060 thick with a diamond-7\/8\"-5\/8\" universal arbor for all tile\nsaws, circular saws and hand-held grinders. The thin (.060) cutting rim allows\nfor the best combination of cutting speed and blade life while producing a\nfirst-class cut! The diamond rim is also 10mm tall which maximizes cutting\nlife and achieves a low cost per cut. Recommended operating speed is 5,100\nRPM. Expected blade life is approximately 600 linear feet.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis general purpose diamond blade is used for cutting a wide range of materials including ceramic tile, porcelain tile, granite, marble, slate, terrazzo or anything similar.\u003c\/li\u003e\n \u003cli\u003eSpecs are 7\" diameter X .060 thick with a diamond-7\/8\"-5\/8\" universal arbor for all tile saws, circular saws and hand-held grinders.\u003c\/li\u003e\n \u003cli\u003eThe core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.\u003c\/li\u003e\n \u003cli\u003eThe thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! It is also 10mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 5,100 RPM.\u003c\/li\u003e\n \u003cli\u003eThis top-quality product is made in USA and backed with a 100% lifetime warranty plus free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended use), or if the bond between the diamond rim and the steel core becomes separated at any time, it will be replaced free of charge!\u003c\/li\u003e\n \u003c\/ul\u003e"}
Piranha 7-inch (7") Continuous Rim Wet/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone & Similar Materials
$185.00 AUD
Piranha 7-inch (7") Continuous Rim Wet/Dry Diamond Blade for Cutting Porcelain Tile, Ceramic Tile, Stone & Similar Materials Piranha 7-inch (7") continuous rim wet/dry diamond blades are made with GE Superabrasive diamonds and are used for cutting a wide range of materials including ceramic tile, porcelain tile, stone or anything similar. Sp...
TAROSE 30-Piece T101AO 3-1/4 Inc...
$127.00 AUD
{"id":6696933654679,"title":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood","handle":"tarose-30-piece-t101ao-3-1-4-inch-20-tpi-assorted-t-shank-scrolling-jig-saw-blades-set-for-clean-cutting-wood-3-1-4-20-tpi-30-pcs-clean-for-wood","description":"\u003ch3\u003eTAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:3-1\/4\" 20 TPI - 30 pcs | Color:clean for wood TAROSE 30 Pieces T101AO Jig\nSaw Blades Set includes: 30T101AO. It's an ideal set for precision cutting\nwood. Premium blades deliver high performance with precise, clean cuts.\nPlastic case included for convenient blade storage. T-shank design for maximum\ngrip and stability which fits over 90 percent of current jigsaw makes and\nmodels.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws\u003c\/li\u003e\n \u003cli\u003eMade with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.\u003c\/li\u003e\n \u003cli\u003e3-1\/4 inch overall length, 2-1\/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts\u003c\/li\u003e\n \u003cli\u003eIncludes plastic case for convenient storage\u003c\/li\u003e\n \u003cli\u003e30 piece set\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:33:46+10:00","created_at":"2021-04-07T23:33:46+10:00","vendor":"TAROSE","type":"Jig Saw Blades","tags":["nn05"],"price":12700,"price_min":12700,"price_max":12700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735975346327,"title":"clean for wood \/ 3-1\/4\" 20 TPI - 30 pcs","option1":"clean for wood","option2":"3-1\/4\" 20 TPI - 30 pcs","option3":null,"sku":"B07PZT5MLL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - clean for wood \/ 3-1\/4\" 20 TPI - 30 pcs","public_title":"clean for wood \/ 3-1\/4\" 20 TPI - 30 pcs","options":["clean for wood","3-1\/4\" 20 TPI - 30 pcs"],"price":12700,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"JSB-HCS-T101AO-30","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07PZT5MLL.jpg?v=1651235185","\/\/newnestshop.com\/cdn\/shop\/products\/81VG7ROxQmL.jpg?v=1622445818","\/\/newnestshop.com\/cdn\/shop\/products\/71iTF3Fh6VL.jpg?v=1622445818","\/\/newnestshop.com\/cdn\/shop\/products\/61hH6xTQ4bL.jpg?v=1622445818","\/\/newnestshop.com\/cdn\/shop\/products\/715QzI4CV3L.jpg?v=1622445818","\/\/newnestshop.com\/cdn\/shop\/products\/81JPM5dl5AL.jpg?v=1622445818","\/\/newnestshop.com\/cdn\/shop\/products\/71MQDgKn-tL.jpg?v=1622445818"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07PZT5MLL.jpg?v=1651235185","options":["Color","Size"],"media":[{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":27770485440663,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07PZT5MLL.jpg?v=1651235185"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07PZT5MLL.jpg?v=1651235185","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186539671,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81VG7ROxQmL.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81VG7ROxQmL.jpg?v=1622445818","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186572439,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71iTF3Fh6VL.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71iTF3Fh6VL.jpg?v=1622445818","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186637975,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61hH6xTQ4bL.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61hH6xTQ4bL.jpg?v=1622445818","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186703511,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/715QzI4CV3L.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/715QzI4CV3L.jpg?v=1622445818","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186736279,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81JPM5dl5AL.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81JPM5dl5AL.jpg?v=1622445818","width":1500},{"alt":"TAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1\/4\" 20 TPI - 30 pcs clean for wood - NewNest Australia","id":21309186769047,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71MQDgKn-tL.jpg?v=1622445818"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71MQDgKn-tL.jpg?v=1622445818","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTAROSE 30-Piece T101AO 3-1\/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:3-1\/4\" 20 TPI - 30 pcs | Color:clean for wood TAROSE 30 Pieces T101AO Jig\nSaw Blades Set includes: 30T101AO. It's an ideal set for precision cutting\nwood. Premium blades deliver high performance with precise, clean cuts.\nPlastic case included for convenient blade storage. T-shank design for maximum\ngrip and stability which fits over 90 percent of current jigsaw makes and\nmodels.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eT-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws\u003c\/li\u003e\n \u003cli\u003eMade with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.\u003c\/li\u003e\n \u003cli\u003e3-1\/4 inch overall length, 2-1\/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts\u003c\/li\u003e\n \u003cli\u003eIncludes plastic case for convenient storage\u003c\/li\u003e\n \u003cli\u003e30 piece set\u003c\/li\u003e\n \u003c\/ul\u003e"}
TAROSE 30-Piece T101AO 3-1/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood 3-1/4" 20 TPI - 30 pcs clean for wood
$127.00 AUD
TAROSE 30-Piece T101AO 3-1/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood Size:3-1/4" 20 TPI - 30 pcs | Color:clean for wood TAROSE 30 Pieces T101AO Jig Saw Blades Set includes: 30T101AO. It's an ideal set for precision cutting wood. Premium blades deliver high performance with precise, clean cuts. Plastic cas...
6-Inch 14TPI Heavy Duty Metal Cu...
$142.00 AUD
{"id":6696929624215,"title":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack","handle":"6-inch-14tpi-heavy-duty-metal-cutting-reciprocating-saw-blades-top-material-bi-metal-demolition-reciprocating-saw-blades-for-thick-metal-fast-straight-cutting-solid-pipes-profiles-10-pack","description":"\u003ch3\u003e6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e✔INCLUDES: 10-PACK, 6-Inch, 14TPI Reciprocaitng Saw Blade For Metal Cutting.\n Works with all major reciprocating saw brands such as DeWalt, Makita,\nRidgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi\n✔SPECIFICATIONS Fast straight cut, ideal for thick sheet metal[3-8mm], solid\npipes\/profiles [dia. 10-100mm] Especially for plunge cuts,sharp tip makes it\neasy into any corner for cutting job Reciprocating saw blades have reinforced\nteeth for increased durability. The hook angle on the teeth creates an\nextremely aggressive, fast-cutting blade. Tooth design utilizes sharper tooth\ngeometry for faster cut rates. Aggressive shank angle increases tooth\ncontact, maintaining cutting speed as blade wears for longer blade life. Made\nof high quality Bi-Metal (stronger than HSS) composition reduces breakage and\nmaximizes tooth durability. Specially formulated coating minimizes friction\nfor smoother cuts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e10-PACK, 6-Inch, 14TPI Reciprocating Saw Blade For Metal Cutting.\u003c\/li\u003e\n \u003cli\u003eMade of high quality Bi-Metal (stronger than HSS) composition for extra 50% longer lifetime\u003c\/li\u003e\n \u003cli\u003eSuitable blade height and flexible thin blade body is more resistant to breaking and shattering\u003c\/li\u003e\n \u003cli\u003eFast straight cut, ideal for thick sheet metal[3-8mm], solid pipes\/profiles [dia. 10-100mm]\u003c\/li\u003e\n \u003cli\u003eWorks with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:33:10+10:00","created_at":"2021-04-07T23:33:10+10:00","vendor":"Janchi","type":"Reciprocating Saw Blades","tags":["nn05"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735971053719,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DPPSL4Y","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack","public_title":null,"options":["Default Title"],"price":14200,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"750920921939","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07DPPSL4Y.jpg?v=1651235153","\/\/newnestshop.com\/cdn\/shop\/products\/61LQDtxCiHL.jpg?v=1622445790","\/\/newnestshop.com\/cdn\/shop\/products\/61g7tx1fqUL.jpg?v=1622445790","\/\/newnestshop.com\/cdn\/shop\/products\/51TB8RkzejL.jpg?v=1622445790","\/\/newnestshop.com\/cdn\/shop\/products\/51XpN0tnbXL.jpg?v=1622445790","\/\/newnestshop.com\/cdn\/shop\/products\/51u_2B2NMk5kL.jpg?v=1622445790","\/\/newnestshop.com\/cdn\/shop\/products\/71Yt9jFfWXL.jpg?v=1622445790"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DPPSL4Y.jpg?v=1651235153","options":["Title"],"media":[{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":27770463781015,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DPPSL4Y.jpg?v=1651235153"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DPPSL4Y.jpg?v=1651235153","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161177239,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61LQDtxCiHL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61LQDtxCiHL.jpg?v=1622445790","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161210007,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61g7tx1fqUL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61g7tx1fqUL.jpg?v=1622445790","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161242775,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51TB8RkzejL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51TB8RkzejL.jpg?v=1622445790","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161275543,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51XpN0tnbXL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51XpN0tnbXL.jpg?v=1622445790","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161308311,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51u_2B2NMk5kL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51u_2B2NMk5kL.jpg?v=1622445790","width":1001},{"alt":"6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack - NewNest Australia","id":21309161341079,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Yt9jFfWXL.jpg?v=1622445790"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Yt9jFfWXL.jpg?v=1622445790","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e✔INCLUDES: 10-PACK, 6-Inch, 14TPI Reciprocaitng Saw Blade For Metal Cutting.\n Works with all major reciprocating saw brands such as DeWalt, Makita,\nRidgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi\n✔SPECIFICATIONS Fast straight cut, ideal for thick sheet metal[3-8mm], solid\npipes\/profiles [dia. 10-100mm] Especially for plunge cuts,sharp tip makes it\neasy into any corner for cutting job Reciprocating saw blades have reinforced\nteeth for increased durability. The hook angle on the teeth creates an\nextremely aggressive, fast-cutting blade. Tooth design utilizes sharper tooth\ngeometry for faster cut rates. Aggressive shank angle increases tooth\ncontact, maintaining cutting speed as blade wears for longer blade life. Made\nof high quality Bi-Metal (stronger than HSS) composition reduces breakage and\nmaximizes tooth durability. Specially formulated coating minimizes friction\nfor smoother cuts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e10-PACK, 6-Inch, 14TPI Reciprocating Saw Blade For Metal Cutting.\u003c\/li\u003e\n \u003cli\u003eMade of high quality Bi-Metal (stronger than HSS) composition for extra 50% longer lifetime\u003c\/li\u003e\n \u003cli\u003eSuitable blade height and flexible thin blade body is more resistant to breaking and shattering\u003c\/li\u003e\n \u003cli\u003eFast straight cut, ideal for thick sheet metal[3-8mm], solid pipes\/profiles [dia. 10-100mm]\u003c\/li\u003e\n \u003cli\u003eWorks with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi.\u003c\/li\u003e\n \u003c\/ul\u003e"}
6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack
$142.00 AUD
6-Inch 14TPI Heavy Duty Metal Cutting Reciprocating Saw Blades, Top Material Bi-Metal Demolition Reciprocating Saw Blades for Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 10-Pack ✔INCLUDES: 10-PACK, 6-Inch, 14TPI Reciprocaitng Saw Blade For Metal Cutting. Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, ...
Freud D0760X Diablo Ultra Finish...
$152.00 AUD
{"id":6696917663895,"title":"Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1\/4-Inch by 60t 5\/8-Inch Arbor 1","handle":"freud-d0760x-diablo-ultra-finish-saw-blade-atb-7-1-4-inch-by-60t-5-8-inch-arbor-1","description":"\u003ch3\u003eFreud D0760X Diablo Ultra Finish Saw Blade ATB 7-1\/4-Inch by 60t 5\/8-Inch Arbor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 Freud's latest addition to the\nDiablo family of 7-1\/4-Inch blades features 60 TiCo Carbide teeth and a\nspecial grind to deliver precise, clean cuts in challenging applications like\nveneer plywood or delicate hardwoods. Suitable for stock up to 1-1\/2-Inch\nthick. The ultra thin kerf offers fast, easy cutting, and minimum waste. Blade\nfeatures Freud's Anti-vibration technology, laser cut steel blade bodies,\nPerma-Shield Non-Stick Coating, and blade pretensioning. For a\nblade dedicated to cutting ultra-fine finish work with remarkably clean, chip-\nfree results, look no further than the Freud D0760X Diablo 7.25-Inch Ultra-\nFine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade\nfor slicing through oak, pine, melamine, veneer plywood, and delicate molding.\nFor strong, long-lasting resistance, the blades feature a tough steel plate\nand high-density carbide tips.Model D0760XDiameter7-1\/4\"Machine UseCircular\nSawApplicationUltra Fine-FinishTeeth60 ATBArbor5\/8\"(Diamond knockout\narbor)Kerf.059\"Hook Angle10°Makes Clean, Chip-Free Cuts in Delicate Finish\nWorkAchieving premium results when creating finish crosscuts in ultra-fine\nmaterials is all about clean, accurate cuts. The Freud D0760X makes this\nprocess easy, fast, and precise. To save you time, most cuts made by this\nblade require little to no sanding.Trim carpenters, fine cabinetmakers, and\navid do-it-yourselfers will want to keep this blade on hand for those special\njobs that call for making ultra-fine finish crosscuts in delicate pieces.\nAppropriate application materials include oak, pine, melamine, veneer plywood,\nand delicate molding.Produces Smooth, Quiet Cuts with Laser-Cut KerfThe Freud\nD0760X's clean-cutting design means that you can enjoy the comfort of smooth\nperformance. The thin 0.59-inch kerf between the blade's 60 ATB (alternate-top\nbevel) teeth is laser cut to provide ease of feed, so you have more control\nover the blade's position. This helps maximize both the accuracy of the cut\nand the efficiency of your work, so you enjoy a job well done and the ability\nto complete more tasks in less time.An added bonus, the blade's laser-cut\nstabilizer vents reduce noise and vibration during operation, keeping your\nwork environment more relaxed and your hands more in control. This feature\nalso reduces friction and warping, helping to extend the blade's cutting\nlife.Features Shock-Resistant Carbide for Long-Lasting PrecisionSo you can\ncount on it over the long term, the Freud D0760X is designed for durability.\nThe blade's hardy teeth are protected by Freud's exclusive shock-resistant\nTiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains\nblade sharpness up to four times longer than standard carbide. And protecting\nthe blade is Perma-Shield Non-Stick Coating that provides resistance to heat\nand corrosion.Fits Circular SawsThe Freud D0760X is a great addition to your\nworkshop because it's designed with the versatility to fit a variety of\ncircular saws.This product is covered by Freud's Limited Lifetime\nWarranty.What's in the BoxFreud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw\nBlade. P.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer Freud's latest addition to the Diablo family of 7-1\/4-Inch blades\nfeatures 60 TiCo Carbide teeth and a special grind to deliver precise, clean\ncuts in challenging applications like veneer plywood or delicate hardwoods.\nSuitable for stock up to 1-1\/2-Inch thick. The ultra thin kerf offers fast,\neasy cutting, and minimum waste. Blade features Freud's Anti-vibration\ntechnology, laser cut steel blade bodies, Perma-Shield Non-Stick Coating, and\nblade pretensioning. 7-1\/4-Inch by 60t , ATB, 5\/8-Inch diamond twist out\narbor. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUltra thin kerf for fast, easy cutting and minimum waste\u003c\/li\u003e\n \u003cli\u003eAnti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness\u003c\/li\u003e\n \u003cli\u003ePerma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life\u003c\/li\u003e\n \u003cli\u003eFeatures Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications\u003c\/li\u003e\n \u003cli\u003eFreud's Limited Lifetime\u003c\/li\u003e\n \u003cli\u003eFeatures Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications\u003c\/li\u003e\n \u003cli\u003eUltra thin kerf for fast, easy cutting and minimum waste\u003c\/li\u003e\n \u003cli\u003eAnti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness\u003c\/li\u003e\n \u003cli\u003ePerma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life\u003c\/li\u003e\n \u003cli\u003eFreud's Limited Lifetime Guarantee\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:31:22+10:00","created_at":"2021-04-07T23:31:22+10:00","vendor":"Freud","type":"Circular Saw Blades","tags":["nn05"],"price":15200,"price_min":15200,"price_max":15200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735948705943,"title":"1","option1":"1","option2":null,"option3":null,"sku":"B001CZEU0S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1\/4-Inch by 60t 5\/8-Inch Arbor 1 - 1","public_title":"1","options":["1"],"price":15200,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"008925075509","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B001CZEU0S.jpg?v=1651235077"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B001CZEU0S.jpg?v=1651235077","options":["Item Package Quantity"],"media":[{"alt":"Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1\/4-Inch by 60t 5\/8-Inch Arbor 1 - NewNest Australia","id":27770420461719,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B001CZEU0S.jpg?v=1651235077"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B001CZEU0S.jpg?v=1651235077","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eFreud D0760X Diablo Ultra Finish Saw Blade ATB 7-1\/4-Inch by 60t 5\/8-Inch Arbor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 Freud's latest addition to the\nDiablo family of 7-1\/4-Inch blades features 60 TiCo Carbide teeth and a\nspecial grind to deliver precise, clean cuts in challenging applications like\nveneer plywood or delicate hardwoods. Suitable for stock up to 1-1\/2-Inch\nthick. The ultra thin kerf offers fast, easy cutting, and minimum waste. Blade\nfeatures Freud's Anti-vibration technology, laser cut steel blade bodies,\nPerma-Shield Non-Stick Coating, and blade pretensioning. For a\nblade dedicated to cutting ultra-fine finish work with remarkably clean, chip-\nfree results, look no further than the Freud D0760X Diablo 7.25-Inch Ultra-\nFine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade\nfor slicing through oak, pine, melamine, veneer plywood, and delicate molding.\nFor strong, long-lasting resistance, the blades feature a tough steel plate\nand high-density carbide tips.Model D0760XDiameter7-1\/4\"Machine UseCircular\nSawApplicationUltra Fine-FinishTeeth60 ATBArbor5\/8\"(Diamond knockout\narbor)Kerf.059\"Hook Angle10°Makes Clean, Chip-Free Cuts in Delicate Finish\nWorkAchieving premium results when creating finish crosscuts in ultra-fine\nmaterials is all about clean, accurate cuts. The Freud D0760X makes this\nprocess easy, fast, and precise. To save you time, most cuts made by this\nblade require little to no sanding.Trim carpenters, fine cabinetmakers, and\navid do-it-yourselfers will want to keep this blade on hand for those special\njobs that call for making ultra-fine finish crosscuts in delicate pieces.\nAppropriate application materials include oak, pine, melamine, veneer plywood,\nand delicate molding.Produces Smooth, Quiet Cuts with Laser-Cut KerfThe Freud\nD0760X's clean-cutting design means that you can enjoy the comfort of smooth\nperformance. The thin 0.59-inch kerf between the blade's 60 ATB (alternate-top\nbevel) teeth is laser cut to provide ease of feed, so you have more control\nover the blade's position. This helps maximize both the accuracy of the cut\nand the efficiency of your work, so you enjoy a job well done and the ability\nto complete more tasks in less time.An added bonus, the blade's laser-cut\nstabilizer vents reduce noise and vibration during operation, keeping your\nwork environment more relaxed and your hands more in control. This feature\nalso reduces friction and warping, helping to extend the blade's cutting\nlife.Features Shock-Resistant Carbide for Long-Lasting PrecisionSo you can\ncount on it over the long term, the Freud D0760X is designed for durability.\nThe blade's hardy teeth are protected by Freud's exclusive shock-resistant\nTiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains\nblade sharpness up to four times longer than standard carbide. And protecting\nthe blade is Perma-Shield Non-Stick Coating that provides resistance to heat\nand corrosion.Fits Circular SawsThe Freud D0760X is a great addition to your\nworkshop because it's designed with the versatility to fit a variety of\ncircular saws.This product is covered by Freud's Limited Lifetime\nWarranty.What's in the BoxFreud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw\nBlade. P.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer Freud's latest addition to the Diablo family of 7-1\/4-Inch blades\nfeatures 60 TiCo Carbide teeth and a special grind to deliver precise, clean\ncuts in challenging applications like veneer plywood or delicate hardwoods.\nSuitable for stock up to 1-1\/2-Inch thick. The ultra thin kerf offers fast,\neasy cutting, and minimum waste. Blade features Freud's Anti-vibration\ntechnology, laser cut steel blade bodies, Perma-Shield Non-Stick Coating, and\nblade pretensioning. 7-1\/4-Inch by 60t , ATB, 5\/8-Inch diamond twist out\narbor. See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUltra thin kerf for fast, easy cutting and minimum waste\u003c\/li\u003e\n \u003cli\u003eAnti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness\u003c\/li\u003e\n \u003cli\u003ePerma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life\u003c\/li\u003e\n \u003cli\u003eFeatures Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications\u003c\/li\u003e\n \u003cli\u003eFreud's Limited Lifetime\u003c\/li\u003e\n \u003cli\u003eFeatures Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications\u003c\/li\u003e\n \u003cli\u003eUltra thin kerf for fast, easy cutting and minimum waste\u003c\/li\u003e\n \u003cli\u003eAnti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness\u003c\/li\u003e\n \u003cli\u003ePerma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life\u003c\/li\u003e\n \u003cli\u003eFreud's Limited Lifetime Guarantee\u003c\/li\u003e\n \u003c\/ul\u003e"}
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor 1
$152.00 AUD
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Item Package Quantity:1 Freud's latest addition to the Diablo family of 7-1/4-Inch blades features 60 TiCo Carbide teeth and a special grind to deliver precise, clean cuts in challenging applications like veneer plywood or delicate hardwoods. Suitable for stock up t...
9-Inch Wood Pruning Reciprocatin...
$124.00 AUD
{"id":6696910160023,"title":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE","handle":"9-inch-wood-pruning-reciprocating-saw-blades-mrcgtce-5-tpi-hcs-big-teeth-reciprocating-saw-pruning-blades-fast-straight-clean-wood-cutting-and-pruning-5-pack-update","description":"\u003ch3\u003e9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:UPDATE MRCGTCE 5 Pack 9-Inch 5 TPI Reciprocating Saw Wood Blades\nAffordable reciprocating saw blades set. Targeted design for pruning and\nwood cutting. Long Lasting HCS Blades Suitable for outdoor garden fast rough\ncutting of wood, tree pruning and PVC plastic pipe. Compatible with Most\nBrands: Works with all major reciprocating saw brands such as Dewalt, Black \u0026amp;\nDecker, Milwaukee, Porter Cable, Skil, Makita, Ryobi and more Product\nDescription Blade Material: High Carbin Steel (Better than CRV) Teeth Per\nInch: 5TPI Teeth Geometry: Ground sharp teeth Blade thickness: 1.4mm Total\nLength: 240mm Cutting Material: Course damp wood, logs, plastic 1\/2 Inch\nShank Brand Introduction MRCGTCE offers a complete line of reciprocating saw\nblades to meet your request. MRCGTCE reciprocating saw blades blades cover the\napplication of all kinds of demolition, plumbing cutting, pallet repair, car\ndismantling, equipment fixing, etc. We deliver customers high quality blades\nwith optimized design based on the user insights, making sure the professional\nusers cut faster and all blades last longer for different applications. The\nrequest from customer motivates us striving for success and improvement.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e5 Pack 9-Inch reciprocating saw pruning blades. Incorporate high-quality HCS materials and optimized 5 TPI tooth design for professional blades that cut faster and last longer.\u003c\/li\u003e\n \u003cli\u003eBuilt using the most advanced alloys and tooth designs, moother cuts,suitable for outdoor fast rough cutting of wood and pruning.That's why they let you produce faster, cleaner and more accurate cuts, time after time.\u003c\/li\u003e\n \u003cli\u003eGets you through that big remodel project with ease, and is great to have on hand for years of little jobs.\u003c\/li\u003e\n \u003cli\u003eCompatible with all reciprocating saw brands, such as DeWalt, Makita, Ridgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi.\u003c\/li\u003e\n \u003cli\u003eIncludes a durable clear plastic storage case that only comes apart when pulled and not when shook.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:29:27+10:00","created_at":"2021-04-07T23:29:27+10:00","vendor":"MRCGTCE","type":"Reciprocating Saw Blades","tags":["nn05"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735934484631,"title":"UPDATE","option1":"UPDATE","option2":null,"option3":null,"sku":"B07Y1CP1FJ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - UPDATE","public_title":"UPDATE","options":["UPDATE"],"price":12400,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1CP1FJ.jpg?v=1651234931","\/\/newnestshop.com\/cdn\/shop\/products\/71aJpcgk0nL.jpg?v=1622445565","\/\/newnestshop.com\/cdn\/shop\/products\/71XJexxsdML.jpg?v=1622445565","\/\/newnestshop.com\/cdn\/shop\/products\/711YE8q5EpL.jpg?v=1622445565","\/\/newnestshop.com\/cdn\/shop\/products\/81G1SiONfvL.jpg?v=1622445565","\/\/newnestshop.com\/cdn\/shop\/products\/713t-uQ6EtL.jpg?v=1622445565","\/\/newnestshop.com\/cdn\/shop\/products\/61HX0wE2_2BLL.jpg?v=1622445565"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1CP1FJ.jpg?v=1651234931","options":["Color"],"media":[{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":27770372292759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1CP1FJ.jpg?v=1651234931"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07Y1CP1FJ.jpg?v=1651234931","width":1001},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016408215,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1001,"width":1335,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71aJpcgk0nL.jpg?v=1622445565"},"aspect_ratio":1.334,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71aJpcgk0nL.jpg?v=1622445565","width":1335},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016473751,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1001,"width":1335,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71XJexxsdML.jpg?v=1622445565"},"aspect_ratio":1.334,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71XJexxsdML.jpg?v=1622445565","width":1335},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016539287,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/711YE8q5EpL.jpg?v=1622445565"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/711YE8q5EpL.jpg?v=1622445565","width":1001},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016604823,"position":5,"preview_image":{"aspect_ratio":1.334,"height":1001,"width":1335,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81G1SiONfvL.jpg?v=1622445565"},"aspect_ratio":1.334,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81G1SiONfvL.jpg?v=1622445565","width":1335},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016670359,"position":6,"preview_image":{"aspect_ratio":1.334,"height":1001,"width":1335,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/713t-uQ6EtL.jpg?v=1622445565"},"aspect_ratio":1.334,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/713t-uQ6EtL.jpg?v=1622445565","width":1335},{"alt":"9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE - NewNest Australia","id":21309016735895,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61HX0wE2_2BLL.jpg?v=1622445565"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61HX0wE2_2BLL.jpg?v=1622445565","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:UPDATE MRCGTCE 5 Pack 9-Inch 5 TPI Reciprocating Saw Wood Blades\nAffordable reciprocating saw blades set. Targeted design for pruning and\nwood cutting. Long Lasting HCS Blades Suitable for outdoor garden fast rough\ncutting of wood, tree pruning and PVC plastic pipe. Compatible with Most\nBrands: Works with all major reciprocating saw brands such as Dewalt, Black \u0026amp;\nDecker, Milwaukee, Porter Cable, Skil, Makita, Ryobi and more Product\nDescription Blade Material: High Carbin Steel (Better than CRV) Teeth Per\nInch: 5TPI Teeth Geometry: Ground sharp teeth Blade thickness: 1.4mm Total\nLength: 240mm Cutting Material: Course damp wood, logs, plastic 1\/2 Inch\nShank Brand Introduction MRCGTCE offers a complete line of reciprocating saw\nblades to meet your request. MRCGTCE reciprocating saw blades blades cover the\napplication of all kinds of demolition, plumbing cutting, pallet repair, car\ndismantling, equipment fixing, etc. We deliver customers high quality blades\nwith optimized design based on the user insights, making sure the professional\nusers cut faster and all blades last longer for different applications. The\nrequest from customer motivates us striving for success and improvement.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e5 Pack 9-Inch reciprocating saw pruning blades. Incorporate high-quality HCS materials and optimized 5 TPI tooth design for professional blades that cut faster and last longer.\u003c\/li\u003e\n \u003cli\u003eBuilt using the most advanced alloys and tooth designs, moother cuts,suitable for outdoor fast rough cutting of wood and pruning.That's why they let you produce faster, cleaner and more accurate cuts, time after time.\u003c\/li\u003e\n \u003cli\u003eGets you through that big remodel project with ease, and is great to have on hand for years of little jobs.\u003c\/li\u003e\n \u003cli\u003eCompatible with all reciprocating saw brands, such as DeWalt, Makita, Ridgid, Milwaukee, Porter \u0026amp; Cable, Skil, Ryobi, Black \u0026amp; Decker, Bosch, Hitachi.\u003c\/li\u003e\n \u003cli\u003eIncludes a durable clear plastic storage case that only comes apart when pulled and not when shook.\u003c\/li\u003e\n \u003c\/ul\u003e"}
9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack UPDATE
$124.00 AUD
9-Inch Wood Pruning Reciprocating Saw Blades, MRCGTCE 5-TPI HCS Big Teeth Reciprocating Saw Pruning Blades, Fast Straight Clean Wood Cutting And Pruning - 5 Pack Color:UPDATE MRCGTCE 5 Pack 9-Inch 5 TPI Reciprocating Saw Wood Blades Affordable reciprocating saw blades set. Targeted design for pruning and wood cutting. Long Lasting HCS Blades Sui...
4.5Inch Super Thin Diamond Tile ...
$105.00 AUD
{"id":6696853962903,"title":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch","handle":"4-5inch-super-thin-diamond-tile-blade-for-cutting-porcelain-tiles-marbles-4-5-inch","description":"\u003ch3\u003e4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4.5 inch Name：Porcelain Cutting Blade Size:4.5\" Thickness:1.2mm\nArbor:15.88-22.23mm Segment heignt:10mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUniversal for dry or wet cutting.\u003c\/li\u003e\n \u003cli\u003eX teeth offer fast and smooth cutting.\u003c\/li\u003e\n \u003cli\u003eSuper thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.\u003c\/li\u003e\n \u003cli\u003eThicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.\u003c\/li\u003e\n \u003cli\u003eDiamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:15:27+10:00","created_at":"2021-04-07T23:15:27+10:00","vendor":"casaverde","type":"Diamond Blades","tags":["nn05"],"price":10500,"price_min":10500,"price_max":10500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735832936599,"title":"4.5 inch","option1":"4.5 inch","option2":null,"option3":null,"sku":"B071NX2ZGP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - 4.5 inch","public_title":"4.5 inch","options":["4.5 inch"],"price":10500,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"DC-CSXSB","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B071NX2ZGP.jpg?v=1651234113","\/\/newnestshop.com\/cdn\/shop\/products\/719m8DJ3tLL.jpg?v=1622444702","\/\/newnestshop.com\/cdn\/shop\/products\/71-X0Yeo_2B_2BL.jpg?v=1622444702","\/\/newnestshop.com\/cdn\/shop\/products\/61Ti3Vs8s3L.jpg?v=1622444702","\/\/newnestshop.com\/cdn\/shop\/products\/618inB7FVKL.jpg?v=1622444702","\/\/newnestshop.com\/cdn\/shop\/products\/61XcweokPvL.jpg?v=1622444702","\/\/newnestshop.com\/cdn\/shop\/products\/41cMchIkeTL.jpg?v=1622444702"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B071NX2ZGP.jpg?v=1651234113","options":["Size"],"media":[{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":27770264092823,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B071NX2ZGP.jpg?v=1651234113"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B071NX2ZGP.jpg?v=1651234113","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391227543,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/719m8DJ3tLL.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/719m8DJ3tLL.jpg?v=1622444702","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391293079,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-X0Yeo_2B_2BL.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-X0Yeo_2B_2BL.jpg?v=1622444702","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391358615,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Ti3Vs8s3L.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Ti3Vs8s3L.jpg?v=1622444702","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391424151,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/618inB7FVKL.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/618inB7FVKL.jpg?v=1622444702","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391489687,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61XcweokPvL.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61XcweokPvL.jpg?v=1622444702","width":1000},{"alt":"4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch - NewNest Australia","id":21308391522455,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41cMchIkeTL.jpg?v=1622444702"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41cMchIkeTL.jpg?v=1622444702","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:4.5 inch Name：Porcelain Cutting Blade Size:4.5\" Thickness:1.2mm\nArbor:15.88-22.23mm Segment heignt:10mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUniversal for dry or wet cutting.\u003c\/li\u003e\n \u003cli\u003eX teeth offer fast and smooth cutting.\u003c\/li\u003e\n \u003cli\u003eSuper thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.\u003c\/li\u003e\n \u003cli\u003eThicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.\u003c\/li\u003e\n \u003cli\u003eDiamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.\u003c\/li\u003e\n \u003c\/ul\u003e"}
4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles 4.5 inch
$105.00 AUD
4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles Size:4.5 inch Name：Porcelain Cutting Blade Size:4.5" Thickness:1.2mm Arbor:15.88-22.23mm Segment heignt:10mm Product Features Universal for dry or wet cutting. X teeth offer fast and smooth cutting. Super thin turbo mesh rim diamond blade pr...
