{"id":6689022509207,"title":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.)","handle":"shdiatool-diamond-core-drill-bits-1-3-8-inch-for-hard-stone-concrete-marble-granite-brick-laser-welded-dry-or-wet-hole-saws-35mm-35mm1-3-8-in","description":"\u003ch3\u003eSHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:35mm(1-3\/8 In.) Product Name: Laser Welded Diamond Dry Drilling Core Bits\nQuantity: 1pc 35mm(1-3\/8-Inch) Specification: Diameter: 35MM, Total length:\n100MM The thread of this core drill bit is 5\/8-Inch-11,Recommended Machine:\nangle grinder If you fit them on drill or other machine, you need an adapter,\nsuch as SDS, hex, Round plus shank... Application: Drilling hard granite\nmarble concrete all mature stone Feature: 1. SUPREME Grade and Special bond\nmatrix extends drilling life and improve the working efficiency 2. Laser\nwelded technology avoid segments off when dry working 3. Turbo segments\nprovide aggressive drilling speed (32mm \u0026amp; above) 4. Ideal for drilling the\nfaucet mounting holes in stone countertops, plumbing lines in showers and\nvanities 5. Vacuum brazed side protection offers clean cut \u0026amp; steel core\nprotection (inside and outside both, 20MM \u0026amp; above ) 6. Dry or Wet Drilling -\nuse wet will greatly prolong the segment life =======THE END====== Available\nDiameter: 6mm-102mm(1\/6 Inch to 4 Inch). Operation Tips for Laser Welded\nDiamond Dry core bits 1.Fix it on angle grinder tightly and rightly 2.Turn on\nthe angle grinder and let the core bits rotating in the air to check if there\nis balance problem. 3.Hold the machine very steadily and give gentle pressure\n4. Start drilling as per following instructions: 1) place the drill at a 30\ndegree angle, it will help to position 2) Drilling the material till the hole\nstart to form 3) Bring the drill up into upright position slowly then keep\ndrilling vertically. 5. Do not give too much pressure or sway the core bits\nwhen working If find hard to drill, take a break and check the segments. If\nthe segment become blunt, please try to sharp it by drilling a hole on the\nabrasive concrete and then continue to drill the hard material.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1-3\/8\"(35mm) Laser Welded Diamond Dry Drilling Core Bits.\u003c\/li\u003e\n \u003cli\u003eDiameter:35mm(1-3\/8 inch), Total length: 100mm, Thread: 5\/8\"-11.\u003c\/li\u003e\n \u003cli\u003eDry or Wet Drilling - use wet will greatly prolong the segment life\u003c\/li\u003e\n \u003cli\u003eDesigned for drilling hard granite, marble, engineering stone, concrete, brick\u003c\/li\u003e\n \u003cli\u003eEasily operate on Angle Grinder; Need an adapter for drill or other machine, such as SDS,hex,Round plus shank\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T20:02:16+10:00","created_at":"2021-04-05T20:02:16+10:00","vendor":"SHDIATOOL","type":"Masonry Core Drill Bits","tags":["nn05"],"price":20300,"price_min":20300,"price_max":20300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39718001901719,"title":"35mm(1-3\/8 In.)","option1":"35mm(1-3\/8 In.)","option2":null,"option3":null,"sku":"B076LCFN4Y","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - 35mm(1-3\/8 In.)","public_title":"35mm(1-3\/8 In.)","options":["35mm(1-3\/8 In.)"],"price":20300,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"718760495270","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B076LCFN4Y.jpg?v=1651225530","\/\/newnestshop.com\/cdn\/shop\/products\/71ufPzEBIKL.jpg?v=1622436177","\/\/newnestshop.com\/cdn\/shop\/products\/51X642jxMwL.jpg?v=1622436177","\/\/newnestshop.com\/cdn\/shop\/products\/61O2GKLQoIL.jpg?v=1622436177","\/\/newnestshop.com\/cdn\/shop\/products\/71O92-h3gkL.jpg?v=1622436177","\/\/newnestshop.com\/cdn\/shop\/products\/511e2-17-kL.jpg?v=1622436177","\/\/newnestshop.com\/cdn\/shop\/products\/51Mwu0WlEoL.jpg?v=1622436177"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B076LCFN4Y.jpg?v=1651225530","options":["Size"],"media":[{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":27768618680471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B076LCFN4Y.jpg?v=1651225530"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B076LCFN4Y.jpg?v=1651225530","width":1100},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392091799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ufPzEBIKL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71ufPzEBIKL.jpg?v=1622436177","width":1100},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392124567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51X642jxMwL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51X642jxMwL.jpg?v=1622436177","width":500},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392157335,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61O2GKLQoIL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61O2GKLQoIL.jpg?v=1622436177","width":1100},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392190103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71O92-h3gkL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71O92-h3gkL.jpg?v=1622436177","width":1100},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392222871,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/511e2-17-kL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/511e2-17-kL.jpg?v=1622436177","width":1100},{"alt":"SHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3\/8 In.) - NewNest Australia","id":21252392288407,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51Mwu0WlEoL.jpg?v=1622436177"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51Mwu0WlEoL.jpg?v=1622436177","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSHDIATOOL Diamond Core Drill Bits 1-3\/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:35mm(1-3\/8 In.) Product Name: Laser Welded Diamond Dry Drilling Core Bits\nQuantity: 1pc 35mm(1-3\/8-Inch) Specification: Diameter: 35MM, Total length:\n100MM The thread of this core drill bit is 5\/8-Inch-11,Recommended Machine:\nangle grinder If you fit them on drill or other machine, you need an adapter,\nsuch as SDS, hex, Round plus shank... Application: Drilling hard granite\nmarble concrete all mature stone Feature: 1. SUPREME Grade and Special bond\nmatrix extends drilling life and improve the working efficiency 2. Laser\nwelded technology avoid segments off when dry working 3. Turbo segments\nprovide aggressive drilling speed (32mm \u0026amp; above) 4. Ideal for drilling the\nfaucet mounting holes in stone countertops, plumbing lines in showers and\nvanities 5. Vacuum brazed side protection offers clean cut \u0026amp; steel core\nprotection (inside and outside both, 20MM \u0026amp; above ) 6. Dry or Wet Drilling -\nuse wet will greatly prolong the segment life =======THE END====== Available\nDiameter: 6mm-102mm(1\/6 Inch to 4 Inch). Operation Tips for Laser Welded\nDiamond Dry core bits 1.Fix it on angle grinder tightly and rightly 2.Turn on\nthe angle grinder and let the core bits rotating in the air to check if there\nis balance problem. 3.Hold the machine very steadily and give gentle pressure\n4. Start drilling as per following instructions: 1) place the drill at a 30\ndegree angle, it will help to position 2) Drilling the material till the hole\nstart to form 3) Bring the drill up into upright position slowly then keep\ndrilling vertically. 5. Do not give too much pressure or sway the core bits\nwhen working If find hard to drill, take a break and check the segments. If\nthe segment become blunt, please try to sharp it by drilling a hole on the\nabrasive concrete and then continue to drill the hard material.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1-3\/8\"(35mm) Laser Welded Diamond Dry Drilling Core Bits.\u003c\/li\u003e\n \u003cli\u003eDiameter:35mm(1-3\/8 inch), Total length: 100mm, Thread: 5\/8\"-11.\u003c\/li\u003e\n \u003cli\u003eDry or Wet Drilling - use wet will greatly prolong the segment life\u003c\/li\u003e\n \u003cli\u003eDesigned for drilling hard granite, marble, engineering stone, concrete, brick\u003c\/li\u003e\n \u003cli\u003eEasily operate on Angle Grinder; Need an adapter for drill or other machine, such as SDS,hex,Round plus shank\u003c\/li\u003e\n \u003c\/ul\u003e"}
SHDIATOOL Diamond Core Drill Bits 1-3/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm 35mm(1-3/8 In.)
SHDIATOOL Diamond Core Drill Bits 1-3/8 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 35mm
Size:35mm(1-3/8 In.) Product Name: Laser Welded Diamond Dry Drilling Core Bits Quantity: 1pc 35mm(1-3/8-Inch) Specification: Diameter: 35MM, Total length: 100MM The thread of this core drill bit is 5/8-Inch-11,Recommended Machine: angle grinder If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank... Application: Drilling hard granite marble concrete all mature stone Feature: 1. SUPREME Grade and Special bond matrix extends drilling life and improve the working efficiency 2. Laser welded technology avoid segments off when dry working 3. Turbo segments provide aggressive drilling speed (32mm & above) 4. Ideal for drilling the faucet mounting holes in stone countertops, plumbing lines in showers and vanities 5. Vacuum brazed side protection offers clean cut & steel core protection (inside and outside both, 20MM & above ) 6. Dry or Wet Drilling - use wet will greatly prolong the segment life =======THE END====== Available Diameter: 6mm-102mm(1/6 Inch to 4 Inch). Operation Tips for Laser Welded Diamond Dry core bits 1.Fix it on angle grinder tightly and rightly 2.Turn on the angle grinder and let the core bits rotating in the air to check if there is balance problem. 3.Hold the machine very steadily and give gentle pressure 4. Start drilling as per following instructions: 1) place the drill at a 30 degree angle, it will help to position 2) Drilling the material till the hole start to form 3) Bring the drill up into upright position slowly then keep drilling vertically. 5. Do not give too much pressure or sway the core bits when working If find hard to drill, take a break and check the segments. If the segment become blunt, please try to sharp it by drilling a hole on the abrasive concrete and then continue to drill the hard material.
Product Features
- 1-3/8"(35mm) Laser Welded Diamond Dry Drilling Core Bits.
- Diameter:35mm(1-3/8 inch), Total length: 100mm, Thread: 5/8"-11.
- Dry or Wet Drilling - use wet will greatly prolong the segment life
- Designed for drilling hard granite, marble, engineering stone, concrete, brick
- Easily operate on Angle Grinder; Need an adapter for drill or other machine, such as SDS,hex,Round plus shank
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.
Related Products
1mm Diamond Drill Bit Jewelry Be...
$123.00 AUD
{"id":6696944205975,"title":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set","handle":"1mm-diamond-drill-bit-jewelry-beach-sea-glass-shells-gemstones-1-24-inch-tip-bur-1-8-inch-shank-dremel-compatible-burr-lapidary-30-pieces-case-set","description":"\u003ch3\u003e1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePremium Quality Set of 30 pcs. 1mm (1\/24\") Diamond Drill\nBits - 1\/8 shank Good for Dremel and Other Rotary ToolsPractical - Suitable to\nbe used with electric, cordless hand drills, upright drills, flex shafts, and\nrotary tools such as Dremel.Perfect for Jewelry Design Necklaces Earrings,\nPendants, Bracelets with Sea Shells, Beach Glass, RocksMake Clean Holes in\nTiles, Marble, Rocks, Ceramic, Porcelain, GemstonesUse with water - do not run\ndry. Diamond Drill Bits for Sea Glass Diamond Drill Bits Diamond Drill Bits\nfor Sea Glass Start at a \"slant\". Drill under water. Drill slow at 3,000-4,000\nRPM. Drilling Stones Water is needed to keep the tool cool. Start out drilling\nat a 45 degree angle, slowly move your drill into a vertical position, and\nallow the bit to do the work (as opposed to applying pressure). These bits\nwill get a good clean hole through stones. 30 pcs Drilax Diamond Drill Bits\nDrilax Diamond Drill Bits, Case Included Read more Drilax 30 Pack 1mm Diamond\nDrill Bit Set Drilax 30 Pack 2mm and 3mm Mix Set Drilax 30 Pack 1mm, 2mm and\n3mm Mix Set Package Includes 30 pcs 30 pcs 30 pcs Case Included ✓ ✓ ✓ 1mm\nCount 30 0 10 2mm Count 15 10 3mm Count 15 10\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSet of 30 PCS 1mm DIAMOND DRILL BIT CASE - 1\/8 inch Shank Compatible with Dremel and Other Rotary Tools\u003c\/li\u003e\n \u003cli\u003eJEWELRY DIAMOND BITS for Necklaces, Earrings, Pendants, Bracelets out of Beach Glass, Sea Shells, Stones, Ceramic, Porcelain\u003c\/li\u003e\n \u003cli\u003eSTART Drilling at an Angle - Go Vertical Later - Submerge the Tip of the Drill in Water.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:35:49+10:00","created_at":"2021-04-07T23:35:49+10:00","vendor":"DRILAX","type":"Masonry Core Drill Bits","tags":["nn05"],"price":12300,"price_min":12300,"price_max":12300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735992909975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00AZMRZ4W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set","public_title":null,"options":["Default Title"],"price":12300,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"600095802246","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00AZMRZ4W.jpg?v=1651235274","\/\/newnestshop.com\/cdn\/shop\/products\/81btDTjz32L.jpg?v=1622445916","\/\/newnestshop.com\/cdn\/shop\/products\/81F_2B2xOc4-L.jpg?v=1622445916","\/\/newnestshop.com\/cdn\/shop\/products\/51w7OyoxEZL_eabce27a-d3b2-4b27-a649-dd98b3204fb6.jpg?v=1622445916","\/\/newnestshop.com\/cdn\/shop\/products\/51eFDIR8sfL.jpg?v=1622445916","\/\/newnestshop.com\/cdn\/shop\/products\/51E1LrOUIiL.jpg?v=1622445916","\/\/newnestshop.com\/cdn\/shop\/products\/61vNZWkwpfL_d0829109-c552-4fac-97ce-6dc10a99c3fc.jpg?v=1622445916"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00AZMRZ4W.jpg?v=1651235274","options":["Title"],"media":[{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":27770540294295,"position":1,"preview_image":{"aspect_ratio":1.799,"height":1423,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00AZMRZ4W.jpg?v=1651235274"},"aspect_ratio":1.799,"height":1423,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00AZMRZ4W.jpg?v=1651235274","width":2560},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273112727,"position":2,"preview_image":{"aspect_ratio":2.061,"height":1242,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81btDTjz32L.jpg?v=1622445916"},"aspect_ratio":2.061,"height":1242,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81btDTjz32L.jpg?v=1622445916","width":2560},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273145495,"position":3,"preview_image":{"aspect_ratio":1.603,"height":1597,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81F_2B2xOc4-L.jpg?v=1622445916"},"aspect_ratio":1.603,"height":1597,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81F_2B2xOc4-L.jpg?v=1622445916","width":2560},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273178263,"position":4,"preview_image":{"aspect_ratio":1.724,"height":290,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51w7OyoxEZL_eabce27a-d3b2-4b27-a649-dd98b3204fb6.jpg?v=1622445916"},"aspect_ratio":1.724,"height":290,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51w7OyoxEZL_eabce27a-d3b2-4b27-a649-dd98b3204fb6.jpg?v=1622445916","width":500},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273211031,"position":5,"preview_image":{"aspect_ratio":1.701,"height":294,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51eFDIR8sfL.jpg?v=1622445916"},"aspect_ratio":1.701,"height":294,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51eFDIR8sfL.jpg?v=1622445916","width":500},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273243799,"position":6,"preview_image":{"aspect_ratio":1.706,"height":293,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51E1LrOUIiL.jpg?v=1622445916"},"aspect_ratio":1.706,"height":293,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51E1LrOUIiL.jpg?v=1622445916","width":500},{"alt":"1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set - NewNest Australia","id":21309273276567,"position":7,"preview_image":{"aspect_ratio":1.604,"height":666,"width":1068,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61vNZWkwpfL_d0829109-c552-4fac-97ce-6dc10a99c3fc.jpg?v=1622445916"},"aspect_ratio":1.604,"height":666,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61vNZWkwpfL_d0829109-c552-4fac-97ce-6dc10a99c3fc.jpg?v=1622445916","width":1068}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1\/24 Inch Tip Bur 1\/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePremium Quality Set of 30 pcs. 1mm (1\/24\") Diamond Drill\nBits - 1\/8 shank Good for Dremel and Other Rotary ToolsPractical - Suitable to\nbe used with electric, cordless hand drills, upright drills, flex shafts, and\nrotary tools such as Dremel.Perfect for Jewelry Design Necklaces Earrings,\nPendants, Bracelets with Sea Shells, Beach Glass, RocksMake Clean Holes in\nTiles, Marble, Rocks, Ceramic, Porcelain, GemstonesUse with water - do not run\ndry. Diamond Drill Bits for Sea Glass Diamond Drill Bits Diamond Drill Bits\nfor Sea Glass Start at a \"slant\". Drill under water. Drill slow at 3,000-4,000\nRPM. Drilling Stones Water is needed to keep the tool cool. Start out drilling\nat a 45 degree angle, slowly move your drill into a vertical position, and\nallow the bit to do the work (as opposed to applying pressure). These bits\nwill get a good clean hole through stones. 30 pcs Drilax Diamond Drill Bits\nDrilax Diamond Drill Bits, Case Included Read more Drilax 30 Pack 1mm Diamond\nDrill Bit Set Drilax 30 Pack 2mm and 3mm Mix Set Drilax 30 Pack 1mm, 2mm and\n3mm Mix Set Package Includes 30 pcs 30 pcs 30 pcs Case Included ✓ ✓ ✓ 1mm\nCount 30 0 10 2mm Count 15 10 3mm Count 15 10\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSet of 30 PCS 1mm DIAMOND DRILL BIT CASE - 1\/8 inch Shank Compatible with Dremel and Other Rotary Tools\u003c\/li\u003e\n \u003cli\u003eJEWELRY DIAMOND BITS for Necklaces, Earrings, Pendants, Bracelets out of Beach Glass, Sea Shells, Stones, Ceramic, Porcelain\u003c\/li\u003e\n \u003cli\u003eSTART Drilling at an Angle - Go Vertical Later - Submerge the Tip of the Drill in Water.\u003c\/li\u003e\n \u003c\/ul\u003e"}
1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1/24 Inch Tip Bur 1/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set
$123.00 AUD
1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones 1/24 Inch Tip Bur 1/8 inch Shank Dremel Compatible Burr Lapidary 30 Pieces Case Set Premium Quality Set of 30 pcs. 1mm (1/24") Diamond Drill Bits - 1/8 shank Good for Dremel and Other Rotary ToolsPractical - Suitable to be used with electric, cordless hand drills, upright drills, fle...
FTG USA Maximum Torque 6 Piece...
$208.00 AUD
{"id":6696911470743,"title":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\")","handle":"ftg-usa-maximum-torque-6-piece-same-size-6-9-64-pro-pack-adjustable-wood-countersink-drill-bit-set-with-woodworking-tapered-hss-bits-secured-with-pin-1-depth-stop-collar-3-8-and-1-hex-wrench-1-8-allen-key-6-9-64","description":"\u003ch3\u003eFTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6 (9\/64\") FTG USA 6 Piece same size Pro Pack - Maximum Torque - Bits\nsecured with pin Never come loose from shank. Adjustable Wood Countersink (6)\n9\/64\" feature the best tapered drill bits HSS M2 , by far the most popular\nHigh Speed Steel, Grade 6542 has superior properties, including high\ntoughness, wear resistance, and good cutting retention. Logo brand is laser\nprinted on each countersink shank making it easier to differentiate this\nquality brand from others. Counterbore size 3\/8\", Plug size 3\/8\". Super sharp,\nvery durable, easy to use, and built to perform well in both hard and soft\nwoods. Drill, countersink and counterbore in 1 step. Top quality material 45\nCarbon Steel adjustable four-cutter counter bore chamfer angle 82 degree,\nattachment that cuts fast and clears chips quickly for fast, smooth\ncountersinking applications. The counter bore feature attaches flats on shank\nwith 2 hex screws for a secure fit and can be adjusted for controlled pilot\nhole depth providing a clean finish for more polished final products. 1 Hex\nKey (Allen Wrench) and 1 Depth Stop Collar included. This product is\nProfessionally manufactured in China at FTG USA specifications. Packaging set\ncombination\/design protected by US Copyright Office.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOne of the best and most popular countersink drill bits set for wood; Bits secured with pin Never Come Loose from shank; Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention; 4 cutter #45 Carbon Steel chamfer angle 82 degree, #6 countersink featuring a 9\/64 inch tapered and fluted drill bit HSS M2\u003c\/li\u003e\n \u003cli\u003eAdjustable 4-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking; the countersink works effortlessly even after many uses; it makes clean and consistent tapered holes for screws without the need of a stop collar; Counterbore size 3\/8\", Plug size 3\/8\"\u003c\/li\u003e\n \u003cli\u003eTapered drill pointed tip with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws; tapered drill bit can be replaced with a replacement bit of the same type and size FTG 2331RPL for extended life; Logo brand laser printed on each countersink shank offering confidence in product authenticity\u003c\/li\u003e\n \u003cli\u003eQuality built counter bore attaches to flats on shank with 2 hex screws for a secure fit and can be adjusted for controlled pilot hole depth ; Drill, countersink and counterbore in 1 step; the countersink cutter doesn't clog up providing superior speed and clean finish; Universal 1\/4 inch hex shank prevents slipping in standard chucks and is compatible with all 1\/4 inch quick-change chucks, including impact drills\u003c\/li\u003e\n \u003cli\u003eCompany Based in Bloomfield, NJ, USA. This product is designed in New Jersey by Fair Trade Group USA LLC and Professionally manufactured in China at FTG USA specifications; Packaging set combination\/design protected by US Copyright Office\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:29:47+10:00","created_at":"2021-04-07T23:29:47+10:00","vendor":"FTG USA","type":"Countersink Drill Bits","tags":["nn05"],"price":20800,"price_min":20800,"price_max":20800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735937237143,"title":"#6 (9\/64\")","option1":"#6 (9\/64\")","option2":null,"option3":null,"sku":"B07FD74M8W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - #6 (9\/64\")","public_title":"#6 (9\/64\")","options":["#6 (9\/64\")"],"price":20800,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"FTG 2331P","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07FD74M8W.jpg?v=1651234946","\/\/newnestshop.com\/cdn\/shop\/products\/81DqHDPJ4LL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/71CgjNWx-KL_6918f1b7-ec29-404f-b397-c1e87290c43f.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/81Govjj4poL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/81RTwAzolTL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/71McFxwLtwL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/81tKWfxNRPL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/81boSCAdvWL.jpg?v=1622445578","\/\/newnestshop.com\/cdn\/shop\/products\/710PcnOGUQL.jpg?v=1622445578"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07FD74M8W.jpg?v=1651234946","options":["Size"],"media":[{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":27770373898391,"position":1,"preview_image":{"aspect_ratio":0.934,"height":2560,"width":2391,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07FD74M8W.jpg?v=1651234946"},"aspect_ratio":0.934,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07FD74M8W.jpg?v=1651234946","width":2391},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028565143,"position":2,"preview_image":{"aspect_ratio":0.931,"height":2560,"width":2383,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81DqHDPJ4LL.jpg?v=1622445578"},"aspect_ratio":0.931,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81DqHDPJ4LL.jpg?v=1622445578","width":2383},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028597911,"position":3,"preview_image":{"aspect_ratio":1.294,"height":1978,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71CgjNWx-KL_6918f1b7-ec29-404f-b397-c1e87290c43f.jpg?v=1622445578"},"aspect_ratio":1.294,"height":1978,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71CgjNWx-KL_6918f1b7-ec29-404f-b397-c1e87290c43f.jpg?v=1622445578","width":2560},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028630679,"position":4,"preview_image":{"aspect_ratio":1.025,"height":2497,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Govjj4poL.jpg?v=1622445578"},"aspect_ratio":1.025,"height":2497,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Govjj4poL.jpg?v=1622445578","width":2560},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028663447,"position":5,"preview_image":{"aspect_ratio":1.04,"height":2462,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81RTwAzolTL.jpg?v=1622445578"},"aspect_ratio":1.04,"height":2462,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81RTwAzolTL.jpg?v=1622445578","width":2560},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028728983,"position":6,"preview_image":{"aspect_ratio":1.638,"height":1563,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71McFxwLtwL.jpg?v=1622445578"},"aspect_ratio":1.638,"height":1563,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71McFxwLtwL.jpg?v=1622445578","width":2560},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028827287,"position":7,"preview_image":{"aspect_ratio":1.294,"height":1978,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tKWfxNRPL.jpg?v=1622445578"},"aspect_ratio":1.294,"height":1978,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tKWfxNRPL.jpg?v=1622445578","width":2560},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028860055,"position":8,"preview_image":{"aspect_ratio":0.771,"height":2560,"width":1975,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81boSCAdvWL.jpg?v=1622445578"},"aspect_ratio":0.771,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81boSCAdvWL.jpg?v=1622445578","width":1975},{"alt":"FTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key) #6 (9\/64\") - NewNest Australia","id":21309028892823,"position":9,"preview_image":{"aspect_ratio":1.294,"height":1978,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/710PcnOGUQL.jpg?v=1622445578"},"aspect_ratio":1.294,"height":1978,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/710PcnOGUQL.jpg?v=1622445578","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eFTG USA Maximum Torque 6 Piece Same Size #6 (9\/64\") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3\/8\" and 1 Hex Wrench (1\/8\" Allen Key)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:6 (9\/64\") FTG USA 6 Piece same size Pro Pack - Maximum Torque - Bits\nsecured with pin Never come loose from shank. Adjustable Wood Countersink (6)\n9\/64\" feature the best tapered drill bits HSS M2 , by far the most popular\nHigh Speed Steel, Grade 6542 has superior properties, including high\ntoughness, wear resistance, and good cutting retention. Logo brand is laser\nprinted on each countersink shank making it easier to differentiate this\nquality brand from others. Counterbore size 3\/8\", Plug size 3\/8\". Super sharp,\nvery durable, easy to use, and built to perform well in both hard and soft\nwoods. Drill, countersink and counterbore in 1 step. Top quality material 45\nCarbon Steel adjustable four-cutter counter bore chamfer angle 82 degree,\nattachment that cuts fast and clears chips quickly for fast, smooth\ncountersinking applications. The counter bore feature attaches flats on shank\nwith 2 hex screws for a secure fit and can be adjusted for controlled pilot\nhole depth providing a clean finish for more polished final products. 1 Hex\nKey (Allen Wrench) and 1 Depth Stop Collar included. This product is\nProfessionally manufactured in China at FTG USA specifications. Packaging set\ncombination\/design protected by US Copyright Office.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOne of the best and most popular countersink drill bits set for wood; Bits secured with pin Never Come Loose from shank; Top Quality material components highly durable:Tapered drill bit HSS M2, by far the most popular High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention; 4 cutter #45 Carbon Steel chamfer angle 82 degree, #6 countersink featuring a 9\/64 inch tapered and fluted drill bit HSS M2\u003c\/li\u003e\n \u003cli\u003eAdjustable 4-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking; the countersink works effortlessly even after many uses; it makes clean and consistent tapered holes for screws without the need of a stop collar; Counterbore size 3\/8\", Plug size 3\/8\"\u003c\/li\u003e\n \u003cli\u003eTapered drill pointed tip with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws; tapered drill bit can be replaced with a replacement bit of the same type and size FTG 2331RPL for extended life; Logo brand laser printed on each countersink shank offering confidence in product authenticity\u003c\/li\u003e\n \u003cli\u003eQuality built counter bore attaches to flats on shank with 2 hex screws for a secure fit and can be adjusted for controlled pilot hole depth ; Drill, countersink and counterbore in 1 step; the countersink cutter doesn't clog up providing superior speed and clean finish; Universal 1\/4 inch hex shank prevents slipping in standard chucks and is compatible with all 1\/4 inch quick-change chucks, including impact drills\u003c\/li\u003e\n \u003cli\u003eCompany Based in Bloomfield, NJ, USA. This product is designed in New Jersey by Fair Trade Group USA LLC and Professionally manufactured in China at FTG USA specifications; Packaging set combination\/design protected by US Copyright Office\u003c\/li\u003e\n \u003c\/ul\u003e"}
FTG USA Maximum Torque 6 Piece Same Size #6 (9/64") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3/8" and 1 Hex Wrench (1/8" Allen Key) #6 (9/64")
$208.00 AUD
FTG USA Maximum Torque 6 Piece Same Size #6 (9/64") Pro Pack - Adjustable Wood Countersink Drill Bit Set with Woodworking Tapered HSS Bits secured with Pin - 1 Depth Stop Collar 3/8" and 1 Hex Wrench (1/8" Allen Key) Size:6 (9/64") FTG USA 6 Piece same size Pro Pack - Maximum Torque - Bits secured with pin Never come loose from shank. Adjustable...
DEWALT Drill Tap Set, Impact Rea...
$197.00 AUD
{"id":6696886927511,"title":"DEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET)","handle":"dewalt-drill-tap-set-impact-ready-1-4-inch-5-piece-dwadtqtr5set","description":"\u003ch3\u003eDEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDEWALT DWADTQTR5SET Impact Ready® 5pc Drill Tap Set 1\/4\" Capacity features a\n1\/4\" hex shank for use in impact drivers. This item allows you to drill, tap,\nand countersink all in one step; capable of working with up to 1\/4\" thick\nmaterial capacity. Commonly used by Elevator Installers, Mechanicals,\nElectricians, Glaziers. Includes: (1) 8-32 UNC, (1) 10-24 UNC, (1) 10-32 UNF,\n(1) 12-24 UNC, (1) 1\/4\"-20 UNC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeatures a 1\/4\" hex shank for use in impact drivers\u003c\/li\u003e\n \u003cli\u003eDrill, tap, and countersink all in one step\u003c\/li\u003e\n \u003cli\u003eUp to 1\/4\" thick material capacity\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:23:59+10:00","created_at":"2021-04-07T23:23:59+10:00","vendor":"DEWALT","type":"Countersink Drill Bits","tags":["nn05"],"price":19700,"price_min":19700,"price_max":19700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735895031959,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01GWSYXOC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET)","public_title":null,"options":["Default Title"],"price":19700,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"885911482783","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B01GWSYXOC.jpg?v=1651234611","\/\/newnestshop.com\/cdn\/shop\/products\/71EJ35pDn-L.jpg?v=1622445238"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B01GWSYXOC.jpg?v=1651234611","options":["Title"],"media":[{"alt":"DEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET) - NewNest Australia","id":27770328481943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01GWSYXOC.jpg?v=1651234611"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01GWSYXOC.jpg?v=1651234611","width":1200},{"alt":"DEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET) - NewNest Australia","id":21308788539543,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71EJ35pDn-L.jpg?v=1622445238"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71EJ35pDn-L.jpg?v=1622445238","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDEWALT Drill Tap Set, Impact Ready, 1\/4-Inch, 5-Piece (DWADTQTR5SET)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDEWALT DWADTQTR5SET Impact Ready® 5pc Drill Tap Set 1\/4\" Capacity features a\n1\/4\" hex shank for use in impact drivers. This item allows you to drill, tap,\nand countersink all in one step; capable of working with up to 1\/4\" thick\nmaterial capacity. Commonly used by Elevator Installers, Mechanicals,\nElectricians, Glaziers. Includes: (1) 8-32 UNC, (1) 10-24 UNC, (1) 10-32 UNF,\n(1) 12-24 UNC, (1) 1\/4\"-20 UNC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeatures a 1\/4\" hex shank for use in impact drivers\u003c\/li\u003e\n \u003cli\u003eDrill, tap, and countersink all in one step\u003c\/li\u003e\n \u003cli\u003eUp to 1\/4\" thick material capacity\u003c\/li\u003e\n \u003c\/ul\u003e"}
DEWALT Drill Tap Set, Impact Ready, 1/4-Inch, 5-Piece (DWADTQTR5SET)
$197.00 AUD
DEWALT Drill Tap Set, Impact Ready, 1/4-Inch, 5-Piece (DWADTQTR5SET) DEWALT DWADTQTR5SET Impact Ready® 5pc Drill Tap Set 1/4" Capacity features a 1/4" hex shank for use in impact drivers. This item allows you to drill, tap, and countersink all in one step; capable of working with up to 1/4" thick material capacity. Commonly used by Elevator Inst...
DEWALT Drill Bit, Spade, 1-1/2-I...
$86.00 AUD
{"id":6696878211223,"title":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586)","handle":"dewalt-drill-bit-spade-1-1-2-inch-x-6-inch-dw1586","description":"\u003ch3\u003eDEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:1-1\/2-Inch Featuring a heavy-duty, full-length,\nheat-treated shank for protection against bends and breaks, DEWALT Spade Bits\nare equipped with high-performance cutting spurs for optimum hole finish. An\nExtreme Speed Channel of the drill bit provides fast chip removal, and a\n14-inch ball groove shank offer quick-change applications. A 1\/4-inch hex\nshank helps to prevent slippage, and a hang hole enables easy storage and wire\npulling. From the Manufacturer DEWALT DW1586 1-1\/2-Inch by 6-Inch Spade Drill\nBit\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHeavy-duty full length heat treat shank of the drill bit provides maximum durability against bending and breaking.\u003c\/li\u003e\n \u003cli\u003eCutting spurs of DEWALT drill bits provide optimum hole finish.\u003c\/li\u003e\n \u003cli\u003e1\/4-inch Hex shank prevents slipping and fits all 1\/4-inch quick change systems.\u003c\/li\u003e\n \u003cli\u003eHang hole allows for bit storage and wire pulling.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:22:31+10:00","created_at":"2021-04-07T23:22:31+10:00","vendor":"DEWALT","type":"Spade Drill Bits","tags":["nn05"],"price":8600,"price_min":8600,"price_max":8600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735884447895,"title":"1-1\/2-Inch","option1":"1-1\/2-Inch","option2":null,"option3":null,"sku":"B0001LQYIU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586) - 1-1\/2-Inch","public_title":"1-1\/2-Inch","options":["1-1\/2-Inch"],"price":8600,"weight":59,"compare_at_price":null,"inventory_management":null,"barcode":"028877475714","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0001LQYIU.jpg?v=1651234547","\/\/newnestshop.com\/cdn\/shop\/products\/61sVq-5EW5L.jpg?v=1622445148","\/\/newnestshop.com\/cdn\/shop\/products\/61w-J1PAKrL.jpg?v=1622445148","\/\/newnestshop.com\/cdn\/shop\/products\/31cxuYUNwcL.jpg?v=1622445148"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0001LQYIU.jpg?v=1651234547","options":["Style"],"media":[{"alt":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586) - NewNest Australia","id":27770321305751,"position":1,"preview_image":{"aspect_ratio":1.047,"height":1470,"width":1539,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0001LQYIU.jpg?v=1651234547"},"aspect_ratio":1.047,"height":1470,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0001LQYIU.jpg?v=1651234547","width":1539},{"alt":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586) - NewNest Australia","id":21308727459991,"position":2,"preview_image":{"aspect_ratio":3.925,"height":532,"width":2088,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61sVq-5EW5L.jpg?v=1622445148"},"aspect_ratio":3.925,"height":532,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61sVq-5EW5L.jpg?v=1622445148","width":2088},{"alt":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586) - NewNest Australia","id":21308727492759,"position":3,"preview_image":{"aspect_ratio":2.681,"height":692,"width":1855,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61w-J1PAKrL.jpg?v=1622445148"},"aspect_ratio":2.681,"height":692,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61w-J1PAKrL.jpg?v=1622445148","width":1855},{"alt":"DEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586) - NewNest Australia","id":21308727525527,"position":4,"preview_image":{"aspect_ratio":0.75,"height":500,"width":375,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/31cxuYUNwcL.jpg?v=1622445148"},"aspect_ratio":0.75,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/31cxuYUNwcL.jpg?v=1622445148","width":375}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDEWALT Drill Bit, Spade, 1-1\/2-Inch x 6-Inch (DW1586)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:1-1\/2-Inch Featuring a heavy-duty, full-length,\nheat-treated shank for protection against bends and breaks, DEWALT Spade Bits\nare equipped with high-performance cutting spurs for optimum hole finish. An\nExtreme Speed Channel of the drill bit provides fast chip removal, and a\n14-inch ball groove shank offer quick-change applications. A 1\/4-inch hex\nshank helps to prevent slippage, and a hang hole enables easy storage and wire\npulling. From the Manufacturer DEWALT DW1586 1-1\/2-Inch by 6-Inch Spade Drill\nBit\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHeavy-duty full length heat treat shank of the drill bit provides maximum durability against bending and breaking.\u003c\/li\u003e\n \u003cli\u003eCutting spurs of DEWALT drill bits provide optimum hole finish.\u003c\/li\u003e\n \u003cli\u003e1\/4-inch Hex shank prevents slipping and fits all 1\/4-inch quick change systems.\u003c\/li\u003e\n \u003cli\u003eHang hole allows for bit storage and wire pulling.\u003c\/li\u003e\n \u003c\/ul\u003e"}
DEWALT Drill Bit, Spade, 1-1/2-Inch x 6-Inch (DW1586)
$86.00 AUD
DEWALT Drill Bit, Spade, 1-1/2-Inch x 6-Inch (DW1586) Style:1-1/2-Inch Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DEWALT Spade Bits are equipped with high-performance cutting spurs for optimum hole finish. An Extreme Speed Channel of the drill bit provides fast chip removal, and a 14-inch ba...
VASGOR 4"x12" Auger Drill Bit fo...
$189.00 AUD
{"id":6696869560471,"title":"VASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026 Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill 4\" x 12\"","handle":"vasgor-4x12-auger-drill-bit-for-planting-easy-planter-garden-auger-bulb-bedding-plant-augers-post-hole-digger-for-3-8-hex-drive-drill-4-x-12","description":"\u003ch3\u003eVASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026amp; Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:4\" x 12\" Product Specifications: - Material: Cast Steel - Overall\nDimension(H x D): 12’’x 4’’ Why choose our product? --Extended Flattened Tip\nHave a machine milled point and blade flighting that starts immediately above\nit. As soon as they hit the ground, they start digging. --Only Tack Welded -\neasy to break in hard ground Have an extended bead weld at the top and bottom\nwhich will not break easily. --Hex Shaped End - Excellent Grip Have a machined\nHex Shaped end giving excellent balanced grip in drill chucks. --NO MORE BACK\nSTRAIN It eliminates constantly bending over while drilling, and this rapid\nplanter will drill through loose, even rocky materials, so you can plant bulbs\nand bedding plants anywhere you want.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePERFECT BULB PLANTING AUGER - Auger Drill Bit for tulips, iris, bulbs, bedding plants, and seedlings. Also great for digging weeds up by the roots. Quickly digs holes up to 12 inches deep and 4 inches wide using the power of your hand held drill.\u003c\/li\u003e\n \u003cli\u003eCORDLESS AUGER DRILL BIT DIGS-Save time and energy. Use in any electric or cordless drill that can accommodate a 3\/8\" bit. No better tool for digging holes in your yard.\u003c\/li\u003e\n \u003cli\u003eEASY TO USE -- Will work with any 3\/8\" or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes. Keep auger clean from soil and debris when not in use\u003c\/li\u003e\n \u003cli\u003eMONEY BACK GUARANTEE -- We stand behind our products. If you have any problem with the item, please feel free to contact us and we will resovle the issue for you immediately.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:20:40+10:00","created_at":"2021-04-07T23:20:40+10:00","vendor":"VASGOR","type":"Auger Drill Bits","tags":["nn05"],"price":18900,"price_min":18900,"price_max":18900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735870652567,"title":"4\" x 12\"","option1":"4\" x 12\"","option2":null,"option3":null,"sku":"B07XG2Y4C9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"VASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026 Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill 4\" x 12\" - 4\" x 12\"","public_title":"4\" x 12\"","options":["4\" x 12\""],"price":18900,"weight":617,"compare_at_price":null,"inventory_management":null,"barcode":"731525276488","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07XG2Y4C9.jpg?v=1651234479","\/\/newnestshop.com\/cdn\/shop\/products\/61XdHqH3DyL.jpg?v=1622445059","\/\/newnestshop.com\/cdn\/shop\/products\/61MqHAd_2BmhL.jpg?v=1622445059"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07XG2Y4C9.jpg?v=1651234479","options":["Color"],"media":[{"alt":"VASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026 Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill 4\" x 12\" - NewNest Australia","id":27770313310359,"position":1,"preview_image":{"aspect_ratio":0.795,"height":1248,"width":992,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07XG2Y4C9.jpg?v=1651234479"},"aspect_ratio":0.795,"height":1248,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07XG2Y4C9.jpg?v=1651234479","width":992},{"alt":"VASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026 Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill 4\" x 12\" - NewNest Australia","id":21308644753559,"position":2,"preview_image":{"aspect_ratio":1.01,"height":1485,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61XdHqH3DyL.jpg?v=1622445059"},"aspect_ratio":1.01,"height":1485,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61XdHqH3DyL.jpg?v=1622445059","width":1500},{"alt":"VASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026 Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill 4\" x 12\" - NewNest Australia","id":21308644786327,"position":3,"preview_image":{"aspect_ratio":1.03,"height":1456,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61MqHAd_2BmhL.jpg?v=1622445059"},"aspect_ratio":1.03,"height":1456,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61MqHAd_2BmhL.jpg?v=1622445059","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eVASGOR 4\"x12\" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb \u0026amp; Bedding Plant Augers - Post Hole Digger for 3\/8” Hex Drive Drill\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor:4\" x 12\" Product Specifications: - Material: Cast Steel - Overall\nDimension(H x D): 12’’x 4’’ Why choose our product? --Extended Flattened Tip\nHave a machine milled point and blade flighting that starts immediately above\nit. As soon as they hit the ground, they start digging. --Only Tack Welded -\neasy to break in hard ground Have an extended bead weld at the top and bottom\nwhich will not break easily. --Hex Shaped End - Excellent Grip Have a machined\nHex Shaped end giving excellent balanced grip in drill chucks. --NO MORE BACK\nSTRAIN It eliminates constantly bending over while drilling, and this rapid\nplanter will drill through loose, even rocky materials, so you can plant bulbs\nand bedding plants anywhere you want.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePERFECT BULB PLANTING AUGER - Auger Drill Bit for tulips, iris, bulbs, bedding plants, and seedlings. Also great for digging weeds up by the roots. Quickly digs holes up to 12 inches deep and 4 inches wide using the power of your hand held drill.\u003c\/li\u003e\n \u003cli\u003eCORDLESS AUGER DRILL BIT DIGS-Save time and energy. Use in any electric or cordless drill that can accommodate a 3\/8\" bit. No better tool for digging holes in your yard.\u003c\/li\u003e\n \u003cli\u003eEASY TO USE -- Will work with any 3\/8\" or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes. Keep auger clean from soil and debris when not in use\u003c\/li\u003e\n \u003cli\u003eMONEY BACK GUARANTEE -- We stand behind our products. If you have any problem with the item, please feel free to contact us and we will resovle the issue for you immediately.\u003c\/li\u003e\n \u003c\/ul\u003e"}
VASGOR 4"x12" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb & Bedding Plant Augers - Post Hole Digger for 3/8” Hex Drive Drill 4" x 12"
$189.00 AUD
VASGOR 4"x12" Auger Drill Bit for Planting - Easy Planter Garden Auger - Bulb & Bedding Plant Augers - Post Hole Digger for 3/8” Hex Drive Drill Color:4" x 12" Product Specifications: - Material: Cast Steel - Overall Dimension(H x D): 12’’x 4’’ Why choose our product? --Extended Flattened Tip Have a machine milled point and blade flighting t...
Anytime Tools 5 Center Drill Cou...
$117.00 AUD
{"id":6696855699607,"title":"Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set","handle":"anytime-tools-5-center-drill-countersink-lathe-bit-mill-tooling-set","description":"\u003ch3\u003eAnytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTop Quality M2 HSS Drill accurate center holes in material prior to turning,\nor use as a starter bit for accurate holes in stock. Sizes 1, 2, 3, 4 and 5,\n60° tip angles.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTop Quality M2 HSS\u003c\/li\u003e\n \u003cli\u003eDrill accurate center holes in material prior to turning, or use as a starter bit for accurate holes\u003c\/li\u003e\n \u003cli\u003eSizes 1, 2, 3, 4 and 5, 60 tip angles.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:15:59+10:00","created_at":"2021-04-07T23:15:59+10:00","vendor":"Anytime Tools","type":"Countersink Drill Bits","tags":["nn05"],"price":11700,"price_min":11700,"price_max":11700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735836672151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000N216SU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set","public_title":null,"options":["Default Title"],"price":11700,"weight":118,"compare_at_price":null,"inventory_management":null,"barcode":"810823010861","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000N216SU.jpg?v=1651234156","\/\/newnestshop.com\/cdn\/shop\/products\/61UZv35B0hL.jpg?v=1622444743","\/\/newnestshop.com\/cdn\/shop\/products\/61pmRDQVfGL.jpg?v=1622444743"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000N216SU.jpg?v=1651234156","options":["Title"],"media":[{"alt":"Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set - NewNest Australia","id":27770271498391,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000N216SU.jpg?v=1651234156"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000N216SU.jpg?v=1651234156","width":1000},{"alt":"Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set - NewNest Australia","id":21308417376407,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61UZv35B0hL.jpg?v=1622444743"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61UZv35B0hL.jpg?v=1622444743","width":1000},{"alt":"Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set - NewNest Australia","id":21308417409175,"position":3,"preview_image":{"aspect_ratio":1.001,"height":999,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61pmRDQVfGL.jpg?v=1622444743"},"aspect_ratio":1.001,"height":999,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61pmRDQVfGL.jpg?v=1622444743","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTop Quality M2 HSS Drill accurate center holes in material prior to turning,\nor use as a starter bit for accurate holes in stock. Sizes 1, 2, 3, 4 and 5,\n60° tip angles.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTop Quality M2 HSS\u003c\/li\u003e\n \u003cli\u003eDrill accurate center holes in material prior to turning, or use as a starter bit for accurate holes\u003c\/li\u003e\n \u003cli\u003eSizes 1, 2, 3, 4 and 5, 60 tip angles.\u003c\/li\u003e\n \u003c\/ul\u003e"}
Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set
$117.00 AUD
Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set Top Quality M2 HSS Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Sizes 1, 2, 3, 4 and 5, 60° tip angles. Product Features Top Quality M2 HSS Drill accurate center holes in material prior to t...
THINKWORK Combination Drill Tap ...
$210.00 AUD
{"id":6696854847639,"title":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric","handle":"thinkwork-combination-drill-tap-tap-bit-set-3-in-1-titanium-coated-screw-tapping-bit-tool-for-drilling-tapping-countersinking-with-quick-change-adapter-13-pcs-sae-metric","description":"\u003ch3\u003eTHINKWORK Combination Drill Tap \u0026amp; Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWhy do customers choose to buy our tap bit set? Easy-to-\nRead Labels Laser-engraved size markings on each drill provide superior\nconvenience and accuracy. Quick Change Adapter Maximize efficiency with the\nincluded quick change adapter that allows you to switch between different\nsizes easily. One-Click Processing Drill bits perform hole drilling, tapping,\nand countersinking in one operation,Titanium-plated layer improves the cutting\nperformance of the drill. Read more Tips: 1.1 \/ 4 hex shanks (6.3mm) is\nsuitable for three-jaw chuck, such as a hand drill, bench drill and tapping\nmachine. 2. Low-speed cutting of holes in materials, suitable for processing\nsoft metal with a thickness of less than 3mm. 2. When using the drill, the\ntemperature of the material will be very high. Please add some water or\ncoolant to prevent the material from smoking when in use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExquisite workmanshipDurable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.\u003c\/li\u003e\n \u003cli\u003eErgonomic designThe product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient 14-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.\u003c\/li\u003e\n \u003cli\u003eHigh efficiency They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.\u003c\/li\u003e\n \u003cli\u003eVarious sizesCan be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 14-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.\u003c\/li\u003e\n \u003cli\u003eAfter-sales serviceIf you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:15:43+10:00","created_at":"2021-04-07T23:15:43+10:00","vendor":"Thinkwork","type":"Countersink Drill Bits","tags":["nn05"],"price":21000,"price_min":21000,"price_max":21000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735834935447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0861QXJ6Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric","public_title":null,"options":["Default Title"],"price":21000,"weight":209,"compare_at_price":null,"inventory_management":null,"barcode":"753534051993","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0861QXJ6Z.jpg?v=1651234134","\/\/newnestshop.com\/cdn\/shop\/products\/71PSfx_2BBVJL.jpg?v=1622444723","\/\/newnestshop.com\/cdn\/shop\/products\/71NscUAwiWL.jpg?v=1622444723","\/\/newnestshop.com\/cdn\/shop\/products\/71-YkMt3FzL.jpg?v=1622444723","\/\/newnestshop.com\/cdn\/shop\/products\/714isyYR33L.jpg?v=1622444723","\/\/newnestshop.com\/cdn\/shop\/products\/71vJcw2W4qL.jpg?v=1622444723","\/\/newnestshop.com\/cdn\/shop\/products\/71AfDX6G6LL.jpg?v=1622444723"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0861QXJ6Z.jpg?v=1651234134","options":["Title"],"media":[{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":27770267664535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0861QXJ6Z.jpg?v=1651234134"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0861QXJ6Z.jpg?v=1651234134","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404826263,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71PSfx_2BBVJL.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71PSfx_2BBVJL.jpg?v=1622444723","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404859031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71NscUAwiWL.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71NscUAwiWL.jpg?v=1622444723","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404891799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-YkMt3FzL.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-YkMt3FzL.jpg?v=1622444723","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404924567,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/714isyYR33L.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/714isyYR33L.jpg?v=1622444723","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404957335,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71vJcw2W4qL.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71vJcw2W4qL.jpg?v=1622444723","width":1500},{"alt":"THINKWORK Combination Drill Tap \u0026 Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric - NewNest Australia","id":21308404990103,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71AfDX6G6LL.jpg?v=1622444723"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71AfDX6G6LL.jpg?v=1622444723","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTHINKWORK Combination Drill Tap \u0026amp; Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE\/Metric\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWhy do customers choose to buy our tap bit set? Easy-to-\nRead Labels Laser-engraved size markings on each drill provide superior\nconvenience and accuracy. Quick Change Adapter Maximize efficiency with the\nincluded quick change adapter that allows you to switch between different\nsizes easily. One-Click Processing Drill bits perform hole drilling, tapping,\nand countersinking in one operation,Titanium-plated layer improves the cutting\nperformance of the drill. Read more Tips: 1.1 \/ 4 hex shanks (6.3mm) is\nsuitable for three-jaw chuck, such as a hand drill, bench drill and tapping\nmachine. 2. Low-speed cutting of holes in materials, suitable for processing\nsoft metal with a thickness of less than 3mm. 2. When using the drill, the\ntemperature of the material will be very high. Please add some water or\ncoolant to prevent the material from smoking when in use.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExquisite workmanshipDurable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.\u003c\/li\u003e\n \u003cli\u003eErgonomic designThe product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient 14-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.\u003c\/li\u003e\n \u003cli\u003eHigh efficiency They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency.\u003c\/li\u003e\n \u003cli\u003eVarious sizesCan be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 14-20NC; 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5; 1 piece-quick change adapter.\u003c\/li\u003e\n \u003cli\u003eAfter-sales serviceIf you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us. The THINKWORK after-sales service team will contact you to solve your problem in time.\u003c\/li\u003e\n \u003c\/ul\u003e"}
THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric
$210.00 AUD
THINKWORK Combination Drill Tap & Tap Bit Set, 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling, Tapping, Countersinking, with Quick-Change Adapter, 13 PCS SAE/Metric Why do customers choose to buy our tap bit set? Easy-to- Read Labels Laser-engraved size markings on each drill provide superior convenience and accuracy. Quick Chang...
ORXPLUS Tools Deburring External...
$181.00 AUD
{"id":6696851701911,"title":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm","handle":"orxplus-tools-deburring-external-chamfer-tool-deburring-drill-bit-remove-burr-tools-quick-release-shank-fits-for-1-8-3-43mm-19mm-deburring-drill-bit-3mm-19mm","description":"\u003ch3\u003eORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProducts of ORX PLUS TOOLS are original design with\nmultinational patents. Also, product quality is always our top priority. ORX\nPLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM Easy to work- Attaching the\ndeburring external chamfer tool to the end of your power drill, Use the lowest\nspeed on the drill bit, and then slightly applying pressure to remove the\nburr.Cost-Effective- These deburring external chamfer tool can be used for\nrepairing damaged bolt and tightening the nuts in place. You do not need to\nspend time and money to find hard-to-find or expensive replacement\nbolts.Safety Design- Quickly repairs damaged bolts and tightens the nuts in\nplace without hurting your hand, no sparks, and no burns; Simplifies the\nrepair process.Using proper speeds and feeds-Drill use 0-400 RPMs. Fit 1\/8'\n(3mm) to 3\/4' (19mm)Widely Application-Effectively used in Stainless Steel,\nHardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic\nHOW TO USE\u0026amp;STEP 1. DRILL MODEL Don't use impact\/hammer driver. Please use\ndrill driver to deburring\/chamfering. 2.FIXED WORKPIECE To make sure perfect\ndeburring, please fix the workpiece tight. 3.SPRAY OIL Hard steel could use\nlubricating oil to improve tool performance 4.DEBURRING\/CHAMFERING In a\nclockwise direction only. Slightly applying pressure to remove the burr. Read\nmore\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.\u003c\/li\u003e\n \u003cli\u003eCost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.\u003c\/li\u003e\n \u003cli\u003eSafety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.\u003c\/li\u003e\n \u003cli\u003eUsing proper speeds and feeds-Drill use 0-400 RPMs. Fit 1\/8' (3mm) to 3\/4' (19mm)\u003c\/li\u003e\n \u003cli\u003eWidely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:14:51+10:00","created_at":"2021-04-07T23:14:51+10:00","vendor":"ORX PLUS TOOLS","type":"Countersink Drill Bits","tags":["nn05"],"price":18100,"price_min":18100,"price_max":18100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735828218007,"title":"Deburring Drill Bit 3mm-19mm","option1":"Deburring Drill Bit 3mm-19mm","option2":null,"option3":null,"sku":"B07MCB2FB6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - Deburring Drill Bit 3mm-19mm","public_title":"Deburring Drill Bit 3mm-19mm","options":["Deburring Drill Bit 3mm-19mm"],"price":18100,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"PO-045-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07MCB2FB6.jpg?v=1651234084","\/\/newnestshop.com\/cdn\/shop\/products\/61v4UaeT83L.jpg?v=1622444677","\/\/newnestshop.com\/cdn\/shop\/products\/816DDwZEM_2BL.jpg?v=1622444677","\/\/newnestshop.com\/cdn\/shop\/products\/61Tf-K44IUL.jpg?v=1622444677","\/\/newnestshop.com\/cdn\/shop\/products\/61bqJX6tElL.jpg?v=1622444677","\/\/newnestshop.com\/cdn\/shop\/products\/612swFApbdL.jpg?v=1622444677","\/\/newnestshop.com\/cdn\/shop\/products\/61OZS3S7CcL.jpg?v=1622444677"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MCB2FB6.jpg?v=1651234084","options":["Size"],"media":[{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":27770258718871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MCB2FB6.jpg?v=1651234084"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MCB2FB6.jpg?v=1651234084","width":1000},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363210903,"position":2,"preview_image":{"aspect_ratio":1.094,"height":914,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61v4UaeT83L.jpg?v=1622444677"},"aspect_ratio":1.094,"height":914,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61v4UaeT83L.jpg?v=1622444677","width":1000},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363243671,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/816DDwZEM_2BL.jpg?v=1622444677"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/816DDwZEM_2BL.jpg?v=1622444677","width":2560},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363276439,"position":4,"preview_image":{"aspect_ratio":0.963,"height":1038,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Tf-K44IUL.jpg?v=1622444677"},"aspect_ratio":0.963,"height":1038,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Tf-K44IUL.jpg?v=1622444677","width":1000},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363309207,"position":5,"preview_image":{"aspect_ratio":0.667,"height":1500,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61bqJX6tElL.jpg?v=1622444677"},"aspect_ratio":0.667,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61bqJX6tElL.jpg?v=1622444677","width":1000},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363341975,"position":6,"preview_image":{"aspect_ratio":0.667,"height":1500,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/612swFApbdL.jpg?v=1622444677"},"aspect_ratio":0.667,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/612swFApbdL.jpg?v=1622444677","width":1000},{"alt":"ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm) Deburring Drill Bit 3mm-19mm - NewNest Australia","id":21308363374743,"position":7,"preview_image":{"aspect_ratio":0.68,"height":1470,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OZS3S7CcL.jpg?v=1622444677"},"aspect_ratio":0.68,"height":1470,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OZS3S7CcL.jpg?v=1622444677","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1\/8\"-3\/4\"(3mm-19mm)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProducts of ORX PLUS TOOLS are original design with\nmultinational patents. Also, product quality is always our top priority. ORX\nPLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM Easy to work- Attaching the\ndeburring external chamfer tool to the end of your power drill, Use the lowest\nspeed on the drill bit, and then slightly applying pressure to remove the\nburr.Cost-Effective- These deburring external chamfer tool can be used for\nrepairing damaged bolt and tightening the nuts in place. You do not need to\nspend time and money to find hard-to-find or expensive replacement\nbolts.Safety Design- Quickly repairs damaged bolts and tightens the nuts in\nplace without hurting your hand, no sparks, and no burns; Simplifies the\nrepair process.Using proper speeds and feeds-Drill use 0-400 RPMs. Fit 1\/8'\n(3mm) to 3\/4' (19mm)Widely Application-Effectively used in Stainless Steel,\nHardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic\nHOW TO USE\u0026amp;STEP 1. DRILL MODEL Don't use impact\/hammer driver. Please use\ndrill driver to deburring\/chamfering. 2.FIXED WORKPIECE To make sure perfect\ndeburring, please fix the workpiece tight. 3.SPRAY OIL Hard steel could use\nlubricating oil to improve tool performance 4.DEBURRING\/CHAMFERING In a\nclockwise direction only. Slightly applying pressure to remove the burr. Read\nmore\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.\u003c\/li\u003e\n \u003cli\u003eCost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.\u003c\/li\u003e\n \u003cli\u003eSafety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.\u003c\/li\u003e\n \u003cli\u003eUsing proper speeds and feeds-Drill use 0-400 RPMs. Fit 1\/8' (3mm) to 3\/4' (19mm)\u003c\/li\u003e\n \u003cli\u003eWidely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic\u003c\/li\u003e\n \u003c\/ul\u003e"}
ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1/8"-3/4"(3mm-19mm) Deburring Drill Bit 3mm-19mm
$181.00 AUD
ORXPLUS Tools Deburring External Chamfer Tool, Deburring Drill Bit, Remove Burr Tools Quick Release Shank Fits for 1/8"-3/4"(3mm-19mm) Products of ORX PLUS TOOLS are original design with multinational patents. Also, product quality is always our top priority. ORX PLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM Easy to work- Attaching the deburring...
IRWIN Countersink Drill Bit Set ...
$237.00 AUD
{"id":6696824504471,"title":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)","handle":"irwin-countersink-drill-bit-set-for-metal-5-piece-1877793","description":"\u003ch3\u003eIRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Drill Bit Set The IRWIN Metal Countersink Drill Bit\nSet features precision ground 82° tips for countersinking most machinable\nmetals, wood, and plastic. Made from industrial grade high-speed steel for\nincreased durability, each countersink has a black oxide coating to resist\ncorrosion and a five-flute design that reduces vibration for smoother drilling\nand an extended life. Set includes 1\/4\", 3\/8\", 1\/2\", 5\/8\", and 3\/4\"\ncountersinks, and a drawer Case From the Manufacturer IRWIN High Speed Steel\nCountersinks feature a precision-ground 82-degree tip that makes them ideal\nfor countersinking into most machinable metals. They're made from industrial\ngrade high speed steel for increased durability, and they include a black\noxide finish for added corrosion resistance. The five flute design reduces\nvibration for smoother drilling and extended life. Plus, the 1\/4\" round shank\nfits all handheld and stationary drills.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision ground 82 tip for countersinking most machinable metals, wood, and plastic\u003c\/li\u003e\n \u003cli\u003eMade from industrial grade high speed steel for increased durability\u003c\/li\u003e\n \u003cli\u003eIncludes a black oxide finish for added corrosion resistance\u003c\/li\u003e\n \u003cli\u003eFive-flute design reduces vibration for smoother drilling and extended life\u003c\/li\u003e\n \u003cli\u003e1\/4\" round shank fits all handheld and stationary drills\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:10:45+10:00","created_at":"2021-04-07T23:10:45+10:00","vendor":"Irwin Tools","type":"Countersink Drill Bits","tags":["nn05"],"price":23700,"price_min":23700,"price_max":23700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735784865943,"title":"Drill Bit Set","option1":"Drill Bit Set","option2":null,"option3":null,"sku":"B00IZFHZUK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - Drill Bit Set","public_title":"Drill Bit Set","options":["Drill Bit Set"],"price":23700,"weight":209,"compare_at_price":null,"inventory_management":null,"barcode":"042526917196","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00IZFHZUK.jpg?v=1651233799","\/\/newnestshop.com\/cdn\/shop\/products\/81U3NajCkuL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/61V2dVBNCRL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/7199aDjCcaL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/71lyuWeXkVL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/71sKLibKRfL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/71LOUrZCDHL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/81Q9DtajLsL.jpg?v=1622444399","\/\/newnestshop.com\/cdn\/shop\/products\/31yjuDlsqrL.jpg?v=1622444399"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00IZFHZUK.jpg?v=1651233799","options":["Style"],"media":[{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":27770225393815,"position":1,"preview_image":{"aspect_ratio":0.756,"height":2560,"width":1935,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00IZFHZUK.jpg?v=1651233799"},"aspect_ratio":0.756,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00IZFHZUK.jpg?v=1651233799","width":1935},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308161982615,"position":2,"preview_image":{"aspect_ratio":1.226,"height":1638,"width":2009,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81U3NajCkuL.jpg?v=1622444399"},"aspect_ratio":1.226,"height":1638,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81U3NajCkuL.jpg?v=1622444399","width":2009},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162015383,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61V2dVBNCRL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61V2dVBNCRL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162048151,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/7199aDjCcaL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/7199aDjCcaL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162080919,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71lyuWeXkVL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71lyuWeXkVL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162113687,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71sKLibKRfL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71sKLibKRfL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162146455,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71LOUrZCDHL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71LOUrZCDHL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162179223,"position":8,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Q9DtajLsL.jpg?v=1622444399"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Q9DtajLsL.jpg?v=1622444399","width":2000},{"alt":"IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) - NewNest Australia","id":21308162211991,"position":9,"preview_image":{"aspect_ratio":0.75,"height":500,"width":375,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/31yjuDlsqrL.jpg?v=1622444399"},"aspect_ratio":0.75,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/31yjuDlsqrL.jpg?v=1622444399","width":375}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eIRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:Drill Bit Set The IRWIN Metal Countersink Drill Bit\nSet features precision ground 82° tips for countersinking most machinable\nmetals, wood, and plastic. Made from industrial grade high-speed steel for\nincreased durability, each countersink has a black oxide coating to resist\ncorrosion and a five-flute design that reduces vibration for smoother drilling\nand an extended life. Set includes 1\/4\", 3\/8\", 1\/2\", 5\/8\", and 3\/4\"\ncountersinks, and a drawer Case From the Manufacturer IRWIN High Speed Steel\nCountersinks feature a precision-ground 82-degree tip that makes them ideal\nfor countersinking into most machinable metals. They're made from industrial\ngrade high speed steel for increased durability, and they include a black\noxide finish for added corrosion resistance. The five flute design reduces\nvibration for smoother drilling and extended life. Plus, the 1\/4\" round shank\nfits all handheld and stationary drills.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision ground 82 tip for countersinking most machinable metals, wood, and plastic\u003c\/li\u003e\n \u003cli\u003eMade from industrial grade high speed steel for increased durability\u003c\/li\u003e\n \u003cli\u003eIncludes a black oxide finish for added corrosion resistance\u003c\/li\u003e\n \u003cli\u003eFive-flute design reduces vibration for smoother drilling and extended life\u003c\/li\u003e\n \u003cli\u003e1\/4\" round shank fits all handheld and stationary drills\u003c\/li\u003e\n \u003c\/ul\u003e"}
IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)
$237.00 AUD
IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793) Style:Drill Bit Set The IRWIN Metal Countersink Drill Bit Set features precision ground 82° tips for countersinking most machinable metals, wood, and plastic. Made from industrial grade high-speed steel for increased durability, each countersink has a black oxide coating to resist cor...
aiyun Titanium Combination Drill...
$114.00 AUD
{"id":6696818213015,"title":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341","handle":"aiyun-titanium-combination-drill-tap-bit-set-6-piece-drill-tap-bits-m3-m10-hss4341","description":"\u003ch3\u003eaiyun Titanium Combination Drill \u0026amp; Tap Bit Set - 6 Piece Drill Tap Bits M3-M10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eComnination drill and tap bit set This is a convenient hex\nshank drill tap bits set that can simultaneously complete hole drilling,\ntapping, deburring and countersinking. Size: M3x0.5, M4x0.7, M5x0.8, M6x1,\nM8x1.25, M10x1.5. Shank Dia: 1\/4 inch Hex Shank(quick change for cordless\ndrill ) Material: High speed steel 1\/4\" Hex Shank Quick Change 1\/4 inch hex\nshank fits into power tools more easily and securely. Titanium Coating\nTitanium coating Classic HSS construction with titanium coating for capability\nand durability. Storage Case Case folds up neatly and is convenient to travel\nwith on different job sites and locations. Read more Note: Be sure to use\nsafety glasses during operation, and keep your hands or face away from the\nrotating drill and cutting powder. Please read the instruction manual of the\npower tool to be used carefully, and follow the warnings and precautions of\neach manufacturer to ensure safe operation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e[What You Will Have] Drill tap bits - 6pcs M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately\u003c\/li\u003e\n \u003cli\u003eFast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency\u003c\/li\u003e\n \u003cli\u003e[Material] HSS4341 (high-speed steel) + titanium coating Classic HSS construction with titanium coating for capability and durability\u003c\/li\u003e\n \u003cli\u003e[Application] Suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr\/countersink also provided on bit beyond back taper\u003c\/li\u003e\n \u003cli\u003e[Quick Change] 1\/4 inch hex shank fits into power tools more easily and securely\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:09:07+10:00","created_at":"2021-04-07T23:09:07+10:00","vendor":"aiyun","type":"Countersink Drill Bits","tags":["nn05"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735773659287,"title":"HSS4341","option1":"HSS4341","option2":null,"option3":null,"sku":"B084GLPG15","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - HSS4341","public_title":"HSS4341","options":["HSS4341"],"price":11400,"weight":80,"compare_at_price":null,"inventory_management":null,"barcode":"MD20-003-6E","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B084GLPG15.jpg?v=1651233687","\/\/newnestshop.com\/cdn\/shop\/products\/618pSQ_2ByCKL.jpg?v=1622444303","\/\/newnestshop.com\/cdn\/shop\/products\/61tpa1SH74L.jpg?v=1622444303","\/\/newnestshop.com\/cdn\/shop\/products\/41YbeuIc4ZL.jpg?v=1622444303","\/\/newnestshop.com\/cdn\/shop\/products\/41iFh4WksyL.jpg?v=1622444303"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B084GLPG15.jpg?v=1651233687","options":["Material Type"],"media":[{"alt":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - NewNest Australia","id":27770209271959,"position":1,"preview_image":{"aspect_ratio":1.071,"height":1212,"width":1298,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B084GLPG15.jpg?v=1651233687"},"aspect_ratio":1.071,"height":1212,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B084GLPG15.jpg?v=1651233687","width":1298},{"alt":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - NewNest Australia","id":21308079472791,"position":2,"preview_image":{"aspect_ratio":0.923,"height":1275,"width":1177,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/618pSQ_2ByCKL.jpg?v=1622444303"},"aspect_ratio":0.923,"height":1275,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/618pSQ_2ByCKL.jpg?v=1622444303","width":1177},{"alt":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - NewNest Australia","id":21308079505559,"position":3,"preview_image":{"aspect_ratio":1.048,"height":1007,"width":1055,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61tpa1SH74L.jpg?v=1622444303"},"aspect_ratio":1.048,"height":1007,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61tpa1SH74L.jpg?v=1622444303","width":1055},{"alt":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - NewNest Australia","id":21308079538327,"position":4,"preview_image":{"aspect_ratio":1.211,"height":413,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41YbeuIc4ZL.jpg?v=1622444303"},"aspect_ratio":1.211,"height":413,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41YbeuIc4ZL.jpg?v=1622444303","width":500},{"alt":"aiyun Titanium Combination Drill \u0026 Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341 - NewNest Australia","id":21308079571095,"position":5,"preview_image":{"aspect_ratio":1.305,"height":383,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41iFh4WksyL.jpg?v=1622444303"},"aspect_ratio":1.305,"height":383,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41iFh4WksyL.jpg?v=1622444303","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eaiyun Titanium Combination Drill \u0026amp; Tap Bit Set - 6 Piece Drill Tap Bits M3-M10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eComnination drill and tap bit set This is a convenient hex\nshank drill tap bits set that can simultaneously complete hole drilling,\ntapping, deburring and countersinking. Size: M3x0.5, M4x0.7, M5x0.8, M6x1,\nM8x1.25, M10x1.5. Shank Dia: 1\/4 inch Hex Shank(quick change for cordless\ndrill ) Material: High speed steel 1\/4\" Hex Shank Quick Change 1\/4 inch hex\nshank fits into power tools more easily and securely. Titanium Coating\nTitanium coating Classic HSS construction with titanium coating for capability\nand durability. Storage Case Case folds up neatly and is convenient to travel\nwith on different job sites and locations. Read more Note: Be sure to use\nsafety glasses during operation, and keep your hands or face away from the\nrotating drill and cutting powder. Please read the instruction manual of the\npower tool to be used carefully, and follow the warnings and precautions of\neach manufacturer to ensure safe operation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e[What You Will Have] Drill tap bits - 6pcs M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately\u003c\/li\u003e\n \u003cli\u003eFast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency\u003c\/li\u003e\n \u003cli\u003e[Material] HSS4341 (high-speed steel) + titanium coating Classic HSS construction with titanium coating for capability and durability\u003c\/li\u003e\n \u003cli\u003e[Application] Suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr\/countersink also provided on bit beyond back taper\u003c\/li\u003e\n \u003cli\u003e[Quick Change] 1\/4 inch hex shank fits into power tools more easily and securely\u003c\/li\u003e\n \u003c\/ul\u003e"}
aiyun Titanium Combination Drill & Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 HSS4341
$114.00 AUD
aiyun Titanium Combination Drill & Tap Bit Set - 6 Piece Drill Tap Bits M3-M10 Comnination drill and tap bit set This is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking. Size: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5. Shank Dia: 1/4 inch Hex Shank(quick cha...
Yakamoz 6PCS Drill Tap Combinati...
$114.00 AUD
{"id":6696809595031,"title":"Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1\/4 Hex Shank Tool Kit | Imperial","handle":"yakamoz-6pcs-drill-tap-combination-bit-set-hss-deburr-countersink-bit-1-4-hex-shank-tool-kit-imperial","description":"\u003ch3\u003eYakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1\/4 Hex Shank Tool Kit | Imperial\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eYakamoz 6PCS 1\/4\" Hex HSS Composite Spiral Screw Tap Drill Material: HSS 4341\nShank: 1\/4\" (6.35mm) Hex Shank Type: Multi-Bit Set Diameter:: 1\/8\" (3.175mm)\n5\/32\" (3.97mm) 3\/16\" (4.76mm) 1\/4\" (6.35mm) 5\/16\" (7.94mm) 3\/8\" (9.53mm)\nPackage Included: 6 x Composite Tap Drill Bit Thread Spiral Screw Tap 1\/4\" Hex\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh hardness, rustproof, solid and durable high-speed steel in Quick-change 1\/4\"(6.35mm) Hex Shank\u003c\/li\u003e\n \u003cli\u003eComplete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency.\u003c\/li\u003e\n \u003cli\u003eSelf-Centering point, do not need assistant center drilling or center punching.\u003c\/li\u003e\n \u003cli\u003eIdeal for drilling, tapping, cutting on wood, soft metal, aluminum plate, iron, etc. (Note: it can not work well with stainless steel 304 or high hardness metal. )\u003c\/li\u003e\n \u003cli\u003eBack tapered beyond tap to prevent thread damage from over-drilling\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:06:33+10:00","created_at":"2021-04-07T23:06:33+10:00","vendor":"YAKAMOZ","type":"Countersink Drill Bits","tags":["nn05"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735755145367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01H50R5N2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1\/4 Hex Shank Tool Kit | Imperial","public_title":null,"options":["Default Title"],"price":11400,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"602701877457","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B01H50R5N2.jpg?v=1651233514"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B01H50R5N2.jpg?v=1651233514","options":["Title"],"media":[{"alt":"Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1\/4 Hex Shank Tool Kit | Imperial - NewNest Australia","id":27770187382935,"position":1,"preview_image":{"aspect_ratio":1.165,"height":218,"width":254,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01H50R5N2.jpg?v=1651233514"},"aspect_ratio":1.165,"height":218,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01H50R5N2.jpg?v=1651233514","width":254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eYakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1\/4 Hex Shank Tool Kit | Imperial\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eYakamoz 6PCS 1\/4\" Hex HSS Composite Spiral Screw Tap Drill Material: HSS 4341\nShank: 1\/4\" (6.35mm) Hex Shank Type: Multi-Bit Set Diameter:: 1\/8\" (3.175mm)\n5\/32\" (3.97mm) 3\/16\" (4.76mm) 1\/4\" (6.35mm) 5\/16\" (7.94mm) 3\/8\" (9.53mm)\nPackage Included: 6 x Composite Tap Drill Bit Thread Spiral Screw Tap 1\/4\" Hex\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh hardness, rustproof, solid and durable high-speed steel in Quick-change 1\/4\"(6.35mm) Hex Shank\u003c\/li\u003e\n \u003cli\u003eComplete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency.\u003c\/li\u003e\n \u003cli\u003eSelf-Centering point, do not need assistant center drilling or center punching.\u003c\/li\u003e\n \u003cli\u003eIdeal for drilling, tapping, cutting on wood, soft metal, aluminum plate, iron, etc. (Note: it can not work well with stainless steel 304 or high hardness metal. )\u003c\/li\u003e\n \u003cli\u003eBack tapered beyond tap to prevent thread damage from over-drilling\u003c\/li\u003e\n \u003c\/ul\u003e"}
Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1/4 Hex Shank Tool Kit | Imperial
$114.00 AUD
Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1/4 Hex Shank Tool Kit | Imperial Yakamoz 6PCS 1/4" Hex HSS Composite Spiral Screw Tap Drill Material: HSS 4341 Shank: 1/4" (6.35mm) Hex Shank Type: Multi-Bit Set Diameter:: 1/8" (3.175mm) 5/32" (3.97mm) 3/16" (4.76mm) 1/4" (6.35mm) 5/16" (7.94mm) 3/8" (9.53mm) Package Include...
Fisch - FSF-134893 FSF-328094 3 ...
$158.00 AUD
{"id":6696807399575,"title":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece","handle":"fisch-fsf-134893-fsf-328094-3-10mm-set-of-chrome-vanadium-brad-point-drill-bits-8-piece","description":"\u003ch3\u003eFisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese premium Chrome Vanadium brad point wood twist drills are designed for\nmaximum performance, the optimized spurs insure fast and easy cutting of the\nwood fibers before the hole is drilled. Additionally, a beveled edge leads to\na perfect drilling of the diameter without any deviation they are ideal for\ndoweling and other precision hole boring. You’ll get a clean cut without tear-\nout. For use in soft, hard, exotic, veneered, laminated and plywood, as well\nas MDF and even acrylic glass. Made in Austria.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOptimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled\u003c\/li\u003e\n \u003cli\u003eBeveled edge leads to clean drilling of the diameter without any deviation\u003c\/li\u003e\n \u003cli\u003eFor use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic glass\u003c\/li\u003e\n \u003cli\u003eSet includes 3, 4, 5, 6, 7, 8, 9 and 10 mm in a Poly case. Suitable for use in drill press\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:06:01+10:00","created_at":"2021-04-07T23:06:01+10:00","vendor":"Fisch","type":"Brad-Point Drill Bits","tags":["nn05"],"price":15800,"price_min":15800,"price_max":15800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735750754455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B007G4MX4Y","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece","public_title":null,"options":["Default Title"],"price":15800,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"FSF-328094","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B007G4MX4Y.jpg?v=1651233464","\/\/newnestshop.com\/cdn\/shop\/products\/81msUidIqrL.jpg?v=1622444096","\/\/newnestshop.com\/cdn\/shop\/products\/71XgUCeFC_2BL.jpg?v=1622444096","\/\/newnestshop.com\/cdn\/shop\/products\/51dC9rYgLDL.jpg?v=1622444096","\/\/newnestshop.com\/cdn\/shop\/products\/31_2B9UjxfBCL.jpg?v=1622444096"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B007G4MX4Y.jpg?v=1651233464","options":["Title"],"media":[{"alt":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece - NewNest Australia","id":27770182795415,"position":1,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B007G4MX4Y.jpg?v=1651233464"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B007G4MX4Y.jpg?v=1651233464","width":500},{"alt":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece - NewNest Australia","id":21307922284695,"position":2,"preview_image":{"aspect_ratio":0.871,"height":2560,"width":2230,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81msUidIqrL.jpg?v=1622444096"},"aspect_ratio":0.871,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81msUidIqrL.jpg?v=1622444096","width":2230},{"alt":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece - NewNest Australia","id":21307922317463,"position":3,"preview_image":{"aspect_ratio":0.971,"height":1093,"width":1061,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71XgUCeFC_2BL.jpg?v=1622444096"},"aspect_ratio":0.971,"height":1093,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71XgUCeFC_2BL.jpg?v=1622444096","width":1061},{"alt":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece - NewNest Australia","id":21307922350231,"position":4,"preview_image":{"aspect_ratio":12.0,"height":125,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51dC9rYgLDL.jpg?v=1622444096"},"aspect_ratio":12.0,"height":125,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51dC9rYgLDL.jpg?v=1622444096","width":1500},{"alt":"Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece - NewNest Australia","id":21307922382999,"position":5,"preview_image":{"aspect_ratio":0.75,"height":500,"width":375,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/31_2B9UjxfBCL.jpg?v=1622444096"},"aspect_ratio":0.75,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/31_2B9UjxfBCL.jpg?v=1622444096","width":375}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eFisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese premium Chrome Vanadium brad point wood twist drills are designed for\nmaximum performance, the optimized spurs insure fast and easy cutting of the\nwood fibers before the hole is drilled. Additionally, a beveled edge leads to\na perfect drilling of the diameter without any deviation they are ideal for\ndoweling and other precision hole boring. You’ll get a clean cut without tear-\nout. For use in soft, hard, exotic, veneered, laminated and plywood, as well\nas MDF and even acrylic glass. Made in Austria.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOptimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled\u003c\/li\u003e\n \u003cli\u003eBeveled edge leads to clean drilling of the diameter without any deviation\u003c\/li\u003e\n \u003cli\u003eFor use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic glass\u003c\/li\u003e\n \u003cli\u003eSet includes 3, 4, 5, 6, 7, 8, 9 and 10 mm in a Poly case. Suitable for use in drill press\u003c\/li\u003e\n \u003c\/ul\u003e"}
Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece
$158.00 AUD
Fisch - FSF-134893 FSF-328094 3 - 10mm Set of Chrome Vanadium Brad Point Drill Bits, 8-Piece These premium Chrome Vanadium brad point wood twist drills are designed for maximum performance, the optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled. Additionally, a beveled edge leads to a perfect drilling of t...
COMOWARE Countersink Drill Bits ...
$142.00 AUD
{"id":6696785608855,"title":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc","handle":"comoware-countersink-drill-bits-set-7pcs-counter-sink-bit-for-wood-high-speed-steel-woodworking-carpentry-reamer-with-1-free-hex-key-wrench-7pc-1pc","description":"\u003ch3\u003eCOMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:7pc\/1pc SATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm,\n8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel\nfree to contact us.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCAPABILITY \u0026amp; DURABILITY: Classic Carbon Steel Material. High hardness, offer superior cutting power and durable.\u003c\/li\u003e\n \u003cli\u003eTHREE-POINTED DESIGN:Quickly and accurately drill a smooth hole.Better in CENTERING and NO SKID . Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.\u003c\/li\u003e\n \u003cli\u003eREMOVABLE \u0026amp; ADJUSTABLE: Easy to use the combination of Hex Key to adjust or disassemble the countersink drill bit and the five-flutes chamfering.\u003c\/li\u003e\n \u003cli\u003eMULTIPURPOSE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc.\u003c\/li\u003e\n \u003cli\u003eSATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel free to contact us.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:01:36+10:00","created_at":"2021-04-07T23:01:36+10:00","vendor":"COMOWARE","type":"Countersink Drill Bits","tags":["nn05"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735724900503,"title":"7pc\/1pc","option1":"7pc\/1pc","option2":null,"option3":null,"sku":"B07MML1SRQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - 7pc\/1pc","public_title":"7pc\/1pc","options":["7pc\/1pc"],"price":14200,"weight":295,"compare_at_price":null,"inventory_management":null,"barcode":"843122785182","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07MML1SRQ.jpg?v=1651233190","\/\/newnestshop.com\/cdn\/shop\/products\/61sutuzJFpL.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/61jLNR4KRqL.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/61lGdlKzHnL.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/61OsQPoSn9L.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/71-pzd8a1JL.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/7134epAXkPL.jpg?v=1622443825","\/\/newnestshop.com\/cdn\/shop\/products\/61OG1lv50OL.jpg?v=1622443825"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MML1SRQ.jpg?v=1651233190","options":["Style"],"media":[{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":27770136789143,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MML1SRQ.jpg?v=1651233190"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07MML1SRQ.jpg?v=1651233190","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779088535,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61sutuzJFpL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61sutuzJFpL.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779121303,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61jLNR4KRqL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61jLNR4KRqL.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779154071,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61lGdlKzHnL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61lGdlKzHnL.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779186839,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OsQPoSn9L.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OsQPoSn9L.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779219607,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-pzd8a1JL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71-pzd8a1JL.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779252375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/7134epAXkPL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/7134epAXkPL.jpg?v=1622443825","width":1001},{"alt":"COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc\/1pc - NewNest Australia","id":21307779285143,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OG1lv50OL.jpg?v=1622443825"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61OG1lv50OL.jpg?v=1622443825","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCOMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eStyle:7pc\/1pc SATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm,\n8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel\nfree to contact us.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCAPABILITY \u0026amp; DURABILITY: Classic Carbon Steel Material. High hardness, offer superior cutting power and durable.\u003c\/li\u003e\n \u003cli\u003eTHREE-POINTED DESIGN:Quickly and accurately drill a smooth hole.Better in CENTERING and NO SKID . Five-edged chamfer design will fast discharge chips from the hole on both sides automatically.\u003c\/li\u003e\n \u003cli\u003eREMOVABLE \u0026amp; ADJUSTABLE: Easy to use the combination of Hex Key to adjust or disassemble the countersink drill bit and the five-flutes chamfering.\u003c\/li\u003e\n \u003cli\u003eMULTIPURPOSE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc.\u003c\/li\u003e\n \u003cli\u003eSATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel free to contact us.\u003c\/li\u003e\n \u003c\/ul\u003e"}
COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench 7pc/1pc
$142.00 AUD
COMOWARE Countersink Drill Bits Set- 7Pcs Counter Sink Bit for Wood High Speed Steel, Woodworking Carpentry Reamer With 1 Free Hex Key Wrench Style:7pc/1pc SATISFY ALL YOU DEMAND: Set include 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm and 1 free Hex Key Wrench.100% SATISFACTION GUARANTEE.Please feel free to contact us. Product Features CAP...
