Enter NEW5 at Checkout for 5% OFF & Free Shipping Australia Wide

panavise

Sort by:
{"id":6822279118999,"title":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333","handle":"panavise-318-18-18-inch-crossbar-for-315-324-and-333","description":"\u003ch3\u003ePanaVise 318-18 18-Inch Crossbar for 315, 324 And 333\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\"PanaVise is a major manufacture of Vises and Work Holding\nTools. PanaVise's Tilt, Turn \u0026amp; Rotate technology has been applied to the\nproduct line, allowing for maximum efficiency and many different uses! All\nPanaVise Products are covered by a Limited Lifetime Warranty! Introducing the\nPanavise 318-14 14-Inch CROSSBAR for 315, 324 and 333, Add longer cross bars\nfor wider circuit boards! Working on bigger boards? Extend the width of any\nPanaVise Circuit Board Holder with our Cross Bars! For use with the 315\nCircuit Board Holder, 333 Rapid Assembly Circuit Board Holder, and 324\nElectronic Work Center. When selecting a crossbar, add a minimum of 2-Inch\n(50.8mm) to your widest circuit board width to accommodate Circuit Board Arms.\nLimited Lifetime Warranty! The PanaVise 318-18 18\" crossbar is a replacement\naccessory for PanaVise circuit board and electronics work-holding tools,\nincluding the 315 circuit board holder head, the 324 electronic work center,\nand the 333 rapid assembly circuit board holder. The 318-18 18\" crossbar\nreplaces any existing crossbars on these tools, and is compatible with all\nPanaVise circuit board holder arms which attach to its length, allowing for\nsingle circuit boards up to 16\" wide to be securely held. (A minimum of 1\" of\ncross bar length is required to support each circuit board holder arm)\nAlternately, multiple pairs of PanaVise circuit board holder arms can be\nattached to the 16\" of usable space on the 318-18 18\" crossbar to allow\nmultiple smaller circuit boards to be mounted simultaneously. Limited Lifetime\nWarranty All PanaVise products are warranted against defective materials\nand\/or workmanship to all original consumer owners from the date of original\nconsumer purchase for the lifetime of ownership by the original consumer\nowner. In the event of defective materials and\/or workmanship, PanaVise\nProducts, Inc. will, without charge, repair or replace, at its option, the\ndefective product within 60-days from the receipt of the defective product.\nThe Warranty does not apply to damage not resulting from defective materials\nand\/or workmanship while in the possession of the original consumer or to\nunreasonable use by the original consumer, which includes but is not limited\nto improper installation, or failure to provide reasonable and necessary\nmaintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert\nand currently headquartered in Reno, Nevada, PanaVise is a leader in work-\nholding products. Over the years, a natural outgrowth of this expertise has\nbeen continued development of other items which hold things securely and offer\na wide range of motion. Important areas in which this has been applied\ninclude, electronics, CCTV camera mounts, and audio\/video mounts, earning\nPanaVise the nickname the \"the hold it anywhere you want it company.\" \" From\nthe Manufacturer The PanaVise 318-18 18\" crossbar is a replacement accessory\nfor PanaVise circuit board and electronics work-holding tools, including the\n315 circuit board holder head, the 324 electronic work center, and the 333\nrapid assembly circuit board holder. The 318-18 18\" crossbar replaces any\nexisting crossbars on these tools, and is compatible with all PanaVise circuit\nboard holder arms which attach to its length, allowing for single circuit\nboards up to 16\" wide to be securely held. (A minimum of 1\" of cross bar\nlength is required to support each circuit board holder arm) Alternately,\nmultiple pairs of PanaVise circuit board holder arms can be attached to the\n16\" of usable space on the 318-18 18\" crossbar to allow multiple smaller\ncircuit boards to be mounted simultaneously. Limited Lifetime Warranty All\nPanaVise products are warranted against defective materials and\/or workmanship\nto all original consumer owners from the date of original consumer purchase\nfor the lifetime of ownership by the original consumer owner. In the event of\ndefective materials and\/or workmanship, PanaVise Products, Inc. will, without\ncharge, repair or replace, at its option, the defective product within 60-days\nfrom the receipt of the defective product. The Warranty does not apply to\ndamage not resulting from defective materials and\/or workmanship while in the\npossession of the original consumer or to unreasonable use by the original\nconsumer, which includes but is not limited to improper installation, or\nfailure to provide reasonable and necessary maintenance. About PanaVise\nFounded in 1957 by tool and die maker Otto Colbert and currently headquartered\nin Reno, Nevada, PanaVise is a leader in work-holding products. Over the\nyears, a natural outgrowth of this expertise has been continued development of\nother items which hold things securely and offer a wide range of motion.\nImportant areas in which this has been applied include, electronics, CCTV\ncamera mounts, and audio\/video mounts, earning PanaVise the nickname the \"the\nhold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor use with the 315 Circuit Board Holder, 333 Rapid Assembly Circuit Board Holder, and 324 Electronic Work Center\u003c\/li\u003e\n \u003cli\u003e18-Inch (457.2mm) CROSSBAR\u003c\/li\u003e\n \u003cli\u003eWhen selecting a crossbar, add a minimum of 2-Inch (50.8mm) to your widest circuit board width to accommodate Circuit Board Arms\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-05-04T21:39:29+10:00","created_at":"2021-05-04T21:39:29+10:00","vendor":"Panavise","type":"Clamps","tags":["nn06"],"price":11700,"price_min":11700,"price_max":11700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40015269724311,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000SSNF5Q","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333","public_title":null,"options":["Default Title"],"price":11700,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"729315318180","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000SSNF5Q.jpg?v=1651276448","\/\/newnestshop.com\/cdn\/shop\/products\/51x6i1OSM9L.jpg?v=1622492162","\/\/newnestshop.com\/cdn\/shop\/products\/41K5CqDZ87L.jpg?v=1622492162","\/\/newnestshop.com\/cdn\/shop\/products\/51aTyVGECjL.jpg?v=1622492162"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SSNF5Q.jpg?v=1651276448","options":["Title"],"media":[{"alt":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 - NewNest Australia","id":27776268271767,"position":1,"preview_image":{"aspect_ratio":0.656,"height":2000,"width":1311,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SSNF5Q.jpg?v=1651276448"},"aspect_ratio":0.656,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SSNF5Q.jpg?v=1651276448","width":1311},{"alt":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 - NewNest Australia","id":22703465332887,"position":2,"preview_image":{"aspect_ratio":1.388,"height":1039,"width":1442,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51x6i1OSM9L.jpg?v=1622492162"},"aspect_ratio":1.388,"height":1039,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51x6i1OSM9L.jpg?v=1622492162","width":1442},{"alt":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 - NewNest Australia","id":22703465365655,"position":3,"preview_image":{"aspect_ratio":13.333,"height":150,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41K5CqDZ87L.jpg?v=1622492162"},"aspect_ratio":13.333,"height":150,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41K5CqDZ87L.jpg?v=1622492162","width":2000},{"alt":"PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 - NewNest Australia","id":22703465398423,"position":4,"preview_image":{"aspect_ratio":3.384,"height":591,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51aTyVGECjL.jpg?v=1622492162"},"aspect_ratio":3.384,"height":591,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51aTyVGECjL.jpg?v=1622492162","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePanaVise 318-18 18-Inch Crossbar for 315, 324 And 333\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\"PanaVise is a major manufacture of Vises and Work Holding\nTools. PanaVise's Tilt, Turn \u0026amp; Rotate technology has been applied to the\nproduct line, allowing for maximum efficiency and many different uses! All\nPanaVise Products are covered by a Limited Lifetime Warranty! Introducing the\nPanavise 318-14 14-Inch CROSSBAR for 315, 324 and 333, Add longer cross bars\nfor wider circuit boards! Working on bigger boards? Extend the width of any\nPanaVise Circuit Board Holder with our Cross Bars! For use with the 315\nCircuit Board Holder, 333 Rapid Assembly Circuit Board Holder, and 324\nElectronic Work Center. When selecting a crossbar, add a minimum of 2-Inch\n(50.8mm) to your widest circuit board width to accommodate Circuit Board Arms.\nLimited Lifetime Warranty! The PanaVise 318-18 18\" crossbar is a replacement\naccessory for PanaVise circuit board and electronics work-holding tools,\nincluding the 315 circuit board holder head, the 324 electronic work center,\nand the 333 rapid assembly circuit board holder. The 318-18 18\" crossbar\nreplaces any existing crossbars on these tools, and is compatible with all\nPanaVise circuit board holder arms which attach to its length, allowing for\nsingle circuit boards up to 16\" wide to be securely held. (A minimum of 1\" of\ncross bar length is required to support each circuit board holder arm)\nAlternately, multiple pairs of PanaVise circuit board holder arms can be\nattached to the 16\" of usable space on the 318-18 18\" crossbar to allow\nmultiple smaller circuit boards to be mounted simultaneously. Limited Lifetime\nWarranty All PanaVise products are warranted against defective materials\nand\/or workmanship to all original consumer owners from the date of original\nconsumer purchase for the lifetime of ownership by the original consumer\nowner. In the event of defective materials and\/or workmanship, PanaVise\nProducts, Inc. will, without charge, repair or replace, at its option, the\ndefective product within 60-days from the receipt of the defective product.\nThe Warranty does not apply to damage not resulting from defective materials\nand\/or workmanship while in the possession of the original consumer or to\nunreasonable use by the original consumer, which includes but is not limited\nto improper installation, or failure to provide reasonable and necessary\nmaintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert\nand currently headquartered in Reno, Nevada, PanaVise is a leader in work-\nholding products. Over the years, a natural outgrowth of this expertise has\nbeen continued development of other items which hold things securely and offer\na wide range of motion. Important areas in which this has been applied\ninclude, electronics, CCTV camera mounts, and audio\/video mounts, earning\nPanaVise the nickname the \"the hold it anywhere you want it company.\" \" From\nthe Manufacturer The PanaVise 318-18 18\" crossbar is a replacement accessory\nfor PanaVise circuit board and electronics work-holding tools, including the\n315 circuit board holder head, the 324 electronic work center, and the 333\nrapid assembly circuit board holder. The 318-18 18\" crossbar replaces any\nexisting crossbars on these tools, and is compatible with all PanaVise circuit\nboard holder arms which attach to its length, allowing for single circuit\nboards up to 16\" wide to be securely held. (A minimum of 1\" of cross bar\nlength is required to support each circuit board holder arm) Alternately,\nmultiple pairs of PanaVise circuit board holder arms can be attached to the\n16\" of usable space on the 318-18 18\" crossbar to allow multiple smaller\ncircuit boards to be mounted simultaneously. Limited Lifetime Warranty All\nPanaVise products are warranted against defective materials and\/or workmanship\nto all original consumer owners from the date of original consumer purchase\nfor the lifetime of ownership by the original consumer owner. In the event of\ndefective materials and\/or workmanship, PanaVise Products, Inc. will, without\ncharge, repair or replace, at its option, the defective product within 60-days\nfrom the receipt of the defective product. The Warranty does not apply to\ndamage not resulting from defective materials and\/or workmanship while in the\npossession of the original consumer or to unreasonable use by the original\nconsumer, which includes but is not limited to improper installation, or\nfailure to provide reasonable and necessary maintenance. About PanaVise\nFounded in 1957 by tool and die maker Otto Colbert and currently headquartered\nin Reno, Nevada, PanaVise is a leader in work-holding products. Over the\nyears, a natural outgrowth of this expertise has been continued development of\nother items which hold things securely and offer a wide range of motion.\nImportant areas in which this has been applied include, electronics, CCTV\ncamera mounts, and audio\/video mounts, earning PanaVise the nickname the \"the\nhold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor use with the 315 Circuit Board Holder, 333 Rapid Assembly Circuit Board Holder, and 324 Electronic Work Center\u003c\/li\u003e\n \u003cli\u003e18-Inch (457.2mm) CROSSBAR\u003c\/li\u003e\n \u003cli\u003eWhen selecting a crossbar, add a minimum of 2-Inch (50.8mm) to your widest circuit board width to accommodate Circuit Board Arms\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e"}
PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 - NewNest Australia

PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333

$117.00 AUD

PanaVise 318-18 18-Inch Crossbar for 315, 324 And 333 "PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Pana...


More Info
{"id":6867673055383,"title":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws)","handle":"panavise-352-ptfe-jaws-pair-for-model-301-303-304-and-381-vises-includes-screws","description":"\u003ch3\u003ePanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFor 303 and 304 Vise Heads as well as 301 and 381 Vise\nCombos. Recommended for high heat applications. Won't scratch or mar delicate\npieces Continuous heat tolerance to 500F (260C) From the Manufacturer PanaVise\n352 PTFE (Polytetrafluoroethylene) jaws are replacement jaws for use with the\nPanaVise 303 standard vise head, the 304 low-profile head, and the 301 and 381\nvise combinations. 352 PTFE jaws have a continuous heat tolerance up to 500\ndegrees F (260 degrees C) and feature the extremely low friction\ncharacteristics common to all PTFE products. Together this makes them a good\nchoice for use in high heat conditions that could encourage a possibility of\nheld items adhering to vise jaws. PTFE jaws are designed to be non-marring\nwhen in contact with most surfaces, come in pairs and include two mounting\nscrews. Limited Lifetime Warranty All PanaVise products are warranted against\ndefective materials and\/or workmanship to all original consumer owners from\nthe date of original consumer purchase for the lifetime of ownership by the\noriginal consumer owner. In the event of defective materials and\/or\nworkmanship, PanaVise Products, Inc. will, without charge, repair or replace,\nat its option, the defective product within 60-days from the receipt of the\ndefective product. The Warranty does not apply to damage not resulting from\ndefective materials and\/or workmanship while in the possession of the original\nconsumer or to unreasonable use by the original consumer, which includes but\nis not limited to improper installation, or failure to provide reasonable and\nnecessary maintenance. About PanaVise Founded in 1957 by tool and die maker\nOtto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader\nin work-holding products. Over the years, a natural outgrowth of this\nexpertise has been continued development of other items which hold things\nsecurely and offer a wide range of motion. Important areas in which this has\nbeen applied include, electronics, CCTV camera mounts, and audio\/video mounts,\nearning PanaVise the nickname the \"the hold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor use with the 303 and 304 Vise Heads\u003c\/li\u003e\n \u003cli\u003eRecommended for high heat applications\u003c\/li\u003e\n \u003cli\u003eWon't scratch or mar delicate pieces\u003c\/li\u003e\n \u003cli\u003eContinuous heat tolerance to 500 F (260 C)\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-05-17T17:38:53+10:00","created_at":"2021-05-17T17:38:53+10:00","vendor":"Panavise","type":"Plasma Cutting Equipment","tags":["nn06"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40105159950487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000SSTQE0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws)","public_title":null,"options":["Default Title"],"price":11400,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"729315352009","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/b000sstqe0.jpg?v=1622521486","\/\/newnestshop.com\/cdn\/shop\/products\/51IRtilqViL.jpg?v=1622521486","\/\/newnestshop.com\/cdn\/shop\/products\/51TVYFh15TL.jpg?v=1622521486","\/\/newnestshop.com\/cdn\/shop\/products\/51dSobI6rjL.jpg?v=1622521486","\/\/newnestshop.com\/cdn\/shop\/products\/71T-mlDEzKL.jpg?v=1622521486"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/b000sstqe0.jpg?v=1622521486","options":["Title"],"media":[{"alt":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia","id":23040225476759,"position":1,"preview_image":{"aspect_ratio":6.116,"height":327,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/b000sstqe0.jpg?v=1622521486"},"aspect_ratio":6.116,"height":327,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/b000sstqe0.jpg?v=1622521486","width":2000},{"alt":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia","id":22873881247895,"position":2,"preview_image":{"aspect_ratio":1.8,"height":1111,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51IRtilqViL.jpg?v=1622521486"},"aspect_ratio":1.8,"height":1111,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51IRtilqViL.jpg?v=1622521486","width":2000},{"alt":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia","id":22873881280663,"position":3,"preview_image":{"aspect_ratio":1.907,"height":1049,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51TVYFh15TL.jpg?v=1622521486"},"aspect_ratio":1.907,"height":1049,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51TVYFh15TL.jpg?v=1622521486","width":2000},{"alt":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia","id":22873881313431,"position":4,"preview_image":{"aspect_ratio":1.901,"height":1052,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51dSobI6rjL.jpg?v=1622521486"},"aspect_ratio":1.901,"height":1052,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51dSobI6rjL.jpg?v=1622521486","width":2000},{"alt":"PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia","id":22873881346199,"position":5,"preview_image":{"aspect_ratio":1.587,"height":1260,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71T-mlDEzKL.jpg?v=1622521486"},"aspect_ratio":1.587,"height":1260,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71T-mlDEzKL.jpg?v=1622521486","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFor 303 and 304 Vise Heads as well as 301 and 381 Vise\nCombos. Recommended for high heat applications. Won't scratch or mar delicate\npieces Continuous heat tolerance to 500F (260C) From the Manufacturer PanaVise\n352 PTFE (Polytetrafluoroethylene) jaws are replacement jaws for use with the\nPanaVise 303 standard vise head, the 304 low-profile head, and the 301 and 381\nvise combinations. 352 PTFE jaws have a continuous heat tolerance up to 500\ndegrees F (260 degrees C) and feature the extremely low friction\ncharacteristics common to all PTFE products. Together this makes them a good\nchoice for use in high heat conditions that could encourage a possibility of\nheld items adhering to vise jaws. PTFE jaws are designed to be non-marring\nwhen in contact with most surfaces, come in pairs and include two mounting\nscrews. Limited Lifetime Warranty All PanaVise products are warranted against\ndefective materials and\/or workmanship to all original consumer owners from\nthe date of original consumer purchase for the lifetime of ownership by the\noriginal consumer owner. In the event of defective materials and\/or\nworkmanship, PanaVise Products, Inc. will, without charge, repair or replace,\nat its option, the defective product within 60-days from the receipt of the\ndefective product. The Warranty does not apply to damage not resulting from\ndefective materials and\/or workmanship while in the possession of the original\nconsumer or to unreasonable use by the original consumer, which includes but\nis not limited to improper installation, or failure to provide reasonable and\nnecessary maintenance. About PanaVise Founded in 1957 by tool and die maker\nOtto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader\nin work-holding products. Over the years, a natural outgrowth of this\nexpertise has been continued development of other items which hold things\nsecurely and offer a wide range of motion. Important areas in which this has\nbeen applied include, electronics, CCTV camera mounts, and audio\/video mounts,\nearning PanaVise the nickname the \"the hold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor use with the 303 and 304 Vise Heads\u003c\/li\u003e\n \u003cli\u003eRecommended for high heat applications\u003c\/li\u003e\n \u003cli\u003eWon't scratch or mar delicate pieces\u003c\/li\u003e\n \u003cli\u003eContinuous heat tolerance to 500 F (260 C)\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e"}
PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) - NewNest Australia

PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws)

$114.00 AUD

PanaVise 352 PTFE Jaws (pair) for Model 301, 303, 304 And 381 Vises (Includes Screws) For 303 and 304 Vise Heads as well as 301 and 381 Vise Combos. Recommended for high heat applications. Won't scratch or mar delicate pieces Continuous heat tolerance to 500F (260C) From the Manufacturer PanaVise 352 PTFE (Polytetrafluoroethylene) jaws are repla...


More Info
{"id":6973675503767,"title":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress","handle":"panavise-570-positive-adjustable-stop-for-use-with-any-panapress","description":"\u003ch3\u003ePanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePanaVise is a major manufacture of Vises and Work Holding\nTools. PanaVise's Tilt, Turn \u0026amp; Rotate technology has been applied to the\nproduct line, allowing for maximum efficiency and many different uses! All\nPanaVise Products are covered by a Limited Lifetime Warranty! Introducing the\nPanavise 570 POSITIVE ADJUSTABLE STOP - USE WITH ANY PANAPRESS, Adjustable\nPositive Stop precisely controls ram depth! For the 502 PanaPress, this collar\nslips over the ram and allows you to precisely adjust the downward stroke.\nAccurately controls where the ram will stop its motion. Quickly and easily\nslips over ram. Easy-to-use coarse adjustment firmly locks the Posi-Stop in\nplace. Fine precision adjustment stops the ram exactly where you want it!\nLimited Lifetime Warranty! From the Manufacturer The PanaVise 570 positive\nadjustable stop is an accessory for use with the PanaVise precision PanaPress\n(sold separately and required for use), that provides a dual level of control\nover the downward thrust of the PanaPress ram element. Limiting this movement,\nand with it the 1\/4 ton of possible pressure that the PanaPress can bring to\nbear, is important when crimping cables and wires and performing other\nprecision tasks in order to reduce the chance of damaging items. The PanaVise\n570 is a solid metal collar that slips over the top end of the ram element of\nthe PanaPress and physically limits its possible range of downward movement.\nJobs requiring only coarse adjustment utilize a front oriented screw that is\nturned by hand into the front facing surface of the ram of the PanaPress. More\nprecise movements of the PanaPress ram can be achieved using an inverted rear\noriented screw that contacts the upper edge of the PanaPress frame. With this\nusers can fine tune the ram's motion, using a side oriented screw to secure\nthe fine tuning and then tightening the front screw to lock in a final\nposition, limiting the ram to a consistent range of motion. Limited Lifetime\nWarranty All PanaVise products are warranted against defective materials\nand\/or workmanship to all original consumer owners from the date of original\nconsumer purchase for the lifetime of ownership by the original consumer\nowner. In the event of defective materials and\/or workmanship, PanaVise\nProducts, Inc. will, without charge, repair or replace, at its option, the\ndefective product within 60-days from the receipt of the defective product.\nThe Warranty does not apply to damage not resulting from defective materials\nand\/or workmanship while in the possession of the original consumer or to\nunreasonable use by the original consumer, which includes but is not limited\nto improper installation, or failure to provide reasonable and necessary\nmaintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert\nand currently headquartered in Reno, Nevada, PanaVise is a leader in work-\nholding products. Over the years, a natural outgrowth of this expertise has\nbeen continued development of other items which hold things securely and offer\na wide range of motion. Important areas in which this has been applied\ninclude, electronics, CCTV camera mounts, and audio\/video mounts, earning\nPanaVise the nickname the \"the hold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor the 502 PanaPress (Sold Separately), this collar slips over the ram and allows you to precisely adjust the downward stroke\u003c\/li\u003e\n \u003cli\u003eAccurately controls where the ram will stop its motion\u003c\/li\u003e\n \u003cli\u003eQuickly and easily slips over ram\u003c\/li\u003e\n \u003cli\u003eEasy-to-use coarse adjustment firmly locks the Posi-Stop in place\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-06-26T20:00:23+10:00","created_at":"2021-06-26T20:00:23+10:00","vendor":"Panavise","type":"Stands \u0026 Mobile Bases","tags":["nn07"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40388047306903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000SP1R40","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress","public_title":null,"options":["Default Title"],"price":9800,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"729315570007","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000SP1R40.jpg?v=1651312198","\/\/newnestshop.com\/cdn\/shop\/products\/71pTe4HtI2L.jpg?v=1625860927","\/\/newnestshop.com\/cdn\/shop\/products\/61ZU1-K9pqS.jpg?v=1625860928","\/\/newnestshop.com\/cdn\/shop\/products\/61SOP32HfuS.jpg?v=1625860928","\/\/newnestshop.com\/cdn\/shop\/products\/61nt29_2BTNyL.jpg?v=1625860928","\/\/newnestshop.com\/cdn\/shop\/products\/71rEL1ZDv1S.jpg?v=1625860928"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SP1R40.jpg?v=1651312198","options":["Title"],"media":[{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":27783724335255,"position":1,"preview_image":{"aspect_ratio":1.031,"height":1939,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SP1R40.jpg?v=1651312198"},"aspect_ratio":1.031,"height":1939,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000SP1R40.jpg?v=1651312198","width":2000},{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":23380799389847,"position":2,"preview_image":{"aspect_ratio":0.746,"height":2000,"width":1492,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71pTe4HtI2L.jpg?v=1625860927"},"aspect_ratio":0.746,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71pTe4HtI2L.jpg?v=1625860927","width":1492},{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":23380799422615,"position":3,"preview_image":{"aspect_ratio":1.328,"height":1506,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61ZU1-K9pqS.jpg?v=1625860928"},"aspect_ratio":1.328,"height":1506,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61ZU1-K9pqS.jpg?v=1625860928","width":2000},{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":23380799455383,"position":4,"preview_image":{"aspect_ratio":0.872,"height":2000,"width":1744,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61SOP32HfuS.jpg?v=1625860928"},"aspect_ratio":0.872,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61SOP32HfuS.jpg?v=1625860928","width":1744},{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":23380799488151,"position":5,"preview_image":{"aspect_ratio":1.33,"height":1504,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61nt29_2BTNyL.jpg?v=1625860928"},"aspect_ratio":1.33,"height":1504,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61nt29_2BTNyL.jpg?v=1625860928","width":2000},{"alt":"PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia","id":23380799520919,"position":6,"preview_image":{"aspect_ratio":0.994,"height":2000,"width":1988,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71rEL1ZDv1S.jpg?v=1625860928"},"aspect_ratio":0.994,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71rEL1ZDv1S.jpg?v=1625860928","width":1988}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePanaVise is a major manufacture of Vises and Work Holding\nTools. PanaVise's Tilt, Turn \u0026amp; Rotate technology has been applied to the\nproduct line, allowing for maximum efficiency and many different uses! All\nPanaVise Products are covered by a Limited Lifetime Warranty! Introducing the\nPanavise 570 POSITIVE ADJUSTABLE STOP - USE WITH ANY PANAPRESS, Adjustable\nPositive Stop precisely controls ram depth! For the 502 PanaPress, this collar\nslips over the ram and allows you to precisely adjust the downward stroke.\nAccurately controls where the ram will stop its motion. Quickly and easily\nslips over ram. Easy-to-use coarse adjustment firmly locks the Posi-Stop in\nplace. Fine precision adjustment stops the ram exactly where you want it!\nLimited Lifetime Warranty! From the Manufacturer The PanaVise 570 positive\nadjustable stop is an accessory for use with the PanaVise precision PanaPress\n(sold separately and required for use), that provides a dual level of control\nover the downward thrust of the PanaPress ram element. Limiting this movement,\nand with it the 1\/4 ton of possible pressure that the PanaPress can bring to\nbear, is important when crimping cables and wires and performing other\nprecision tasks in order to reduce the chance of damaging items. The PanaVise\n570 is a solid metal collar that slips over the top end of the ram element of\nthe PanaPress and physically limits its possible range of downward movement.\nJobs requiring only coarse adjustment utilize a front oriented screw that is\nturned by hand into the front facing surface of the ram of the PanaPress. More\nprecise movements of the PanaPress ram can be achieved using an inverted rear\noriented screw that contacts the upper edge of the PanaPress frame. With this\nusers can fine tune the ram's motion, using a side oriented screw to secure\nthe fine tuning and then tightening the front screw to lock in a final\nposition, limiting the ram to a consistent range of motion. Limited Lifetime\nWarranty All PanaVise products are warranted against defective materials\nand\/or workmanship to all original consumer owners from the date of original\nconsumer purchase for the lifetime of ownership by the original consumer\nowner. In the event of defective materials and\/or workmanship, PanaVise\nProducts, Inc. will, without charge, repair or replace, at its option, the\ndefective product within 60-days from the receipt of the defective product.\nThe Warranty does not apply to damage not resulting from defective materials\nand\/or workmanship while in the possession of the original consumer or to\nunreasonable use by the original consumer, which includes but is not limited\nto improper installation, or failure to provide reasonable and necessary\nmaintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert\nand currently headquartered in Reno, Nevada, PanaVise is a leader in work-\nholding products. Over the years, a natural outgrowth of this expertise has\nbeen continued development of other items which hold things securely and offer\na wide range of motion. Important areas in which this has been applied\ninclude, electronics, CCTV camera mounts, and audio\/video mounts, earning\nPanaVise the nickname the \"the hold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFor the 502 PanaPress (Sold Separately), this collar slips over the ram and allows you to precisely adjust the downward stroke\u003c\/li\u003e\n \u003cli\u003eAccurately controls where the ram will stop its motion\u003c\/li\u003e\n \u003cli\u003eQuickly and easily slips over ram\u003c\/li\u003e\n \u003cli\u003eEasy-to-use coarse adjustment firmly locks the Posi-Stop in place\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e"}
PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress - NewNest Australia

PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress

$98.00 AUD

PanaVise 570 Positive Adjustable Stop - For Use With Any PanaPress PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introduc...


More Info
{"id":6673098408087,"title":"PanaVise Model 201 \"Junior\" Miniature Vise 1-(Pack)","handle":"panavise-model-201-junior-miniature-vise-1-pack","description":"\u003ch3\u003ePanaVise Model 201 \"Junior\" Miniature Vise\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1-(Pack) The PanaVise 201 \"Junior\" miniature vise is a combination of\nquality workmanship and durability, ease of adjustment and available\naccessories. Designed for use in small projects requiring precise soldering,\ngluing and tool work, the 201 Junior miniature vise features tilt\nadjustability up to 210-degrees along with 360-degree turns and rotations,\nfine and course clamping abilities, grooved jaws for easy holding power, heat-\ntolerant jaws, compatibility with other vise components and more. Split-ball\njoint allows the vise head to move across 3-planes. View larger. Turn, Tilt\nand Rotate Clamped Items at Will The PanaVise Model 201 Junior miniature vise\nis a versatile, multi-use mini-vise that is suitable for use in everything\nfrom arts and crafts, to model making, electronics and other small projects.\nLightweight, yet durable, the vise is designed around a vise head assembly\nconstructed of a black glass reinforced thermal composite alloy connected to a\ndie cast zinc base by PanaVise's patented ball joint clamp system, known as a\n\"split-ball.\" The split-ball system not only holds items within the vise head\nassembly securely in position, but also allows for maneuvering of them along\nthree separate planes. The complete range of mobility possible with the split-\nball joint clamp system is a 210-degree tilt to the left or right, along with\neither an angled rotation or level turn range of 360 degrees. This range of\nmobility, especially the large left-to-right tilt, allows you to rearrange\nitems being worked on into virtually any position, limiting the need to adjust\nthe overall position of the vise or the item within the vise. Well-suited to\nsmall precision jobs like arts and crafts, and model making. View larger.\nGrooved jaws and heat tolerance make it good for electronics as well. View\nlarger. The head assembly of the PanaVise 201 Junior miniature vise contains a\nnumber of convenient additional features users will find valuable. The first\nof these revolves around is its ability to securely and safely hold items.\nAlthough the 1\" wide by 2\" tall, the jaws of the 201 Junior miniature vise are\nable to secure both tough small jobs as well as delicate jobs by way of their\ndual adjustment mechanism that allows for both course and fine adjustments. In\naddition, the holding power of the jaws can be softened further with an\noptional padded accessory for holding extremely delicate items (sold\nseparately). Next, the upper ends of both jaws contain grooved ridges. These\nridges are designed for detailed work with flat, angled items like circuit\nboards. Also, since ideal vise uses such as circuit board wiring and jewelry\nmaking, involve soldering, the vise head assembly of the PanaVise 201 Junior\nminiature vise is highly resistant to heat, with a continuous heat tolerance\nto 350 degrees F (177 degrees C) and intermittent heat up to 450 degrees F\n(204 degrees C). Flexible Base Mount Options The PanaVise 201 Junior miniature\nvise offers great flexibility of its mount possibilities. The zinc base\nincluded can be used as a stand-alone support when working with light items,\nor can be used to secure the vise permanently to a flat surface via its three\ncountersunk holes (screws not included). In addition to this, the PanaVise 201\nJunior miniature vise is compatible with a range of base accessories that\nallow for mounting and using your vise wherever your work takes you. Key\nFeatures Multi-use mini-vise suited to small-sized projects like arts and\ncrafts, model making, electronics, jewelry making and more The easy-to-use\n\"split-ball\" adjustment element utilizes single knob controls for head\nmovement through 3-planes Fine\/coarse adjusting knob controls jaw pressure for\ndelicate work Grooved jaws are excellent for holding small objects and are\nmade of reinforced thermal composite plastic Durable, heat-tolerant vise head\nassembly construction The vise features compatibility with all PanaVise base\nmounts and many other accessories Specifications Overall height: 6-3\/4\" (173\nmm) Rotation: 360 degrees Swivel: 360 degrees Pivot: 210 degrees Continuous\nheat tolerance: Up to 350 degrees F (177 degrees C) Intermittent heat\ntolerance: Up to 450 degrees F (204 degrees C) Vise opening: up to 2.875\" (73\nmm) Jaw width: 1\" (25.4 mm) Jaw height: 2\" (50.8 mm) Weight: 1.2 lbs. (0.6 kg)\nBase 4.3125\" (109.5 mm) diameter bolt circle .300\" center hole Three counter\nsunk holes for 1\/4\" (6.3 mm) flathead screws (not included) Compatible with\nother PanaVise base mounts What's in the Box PanaVise model 201 \"Junior\"\nminiature vise (includes model 203 PanaVise head assembly, PanaVise Junior\nbase) User's manual and warranty information Limited Lifetime Warranty All\nPanaVise products are warranted against defective materials and\/or workmanship\nto all original consumer owners from the date of original consumer purchase\nfor the lifetime of ownership by the original consumer owner. In the event of\ndefective materials and\/or workmanship, PanaVise Products, Inc. will, without\ncharge, repair or replace, at its option, the defective product within 60-days\nfrom the receipt of the defective product. The Warranty does not apply to\ndamage not resulting from defective materials and\/or workmanship while in the\npossession of the original consumer or to unreasonable use by the original\nconsumer, which includes but is not limited to improper installation, or\nfailure to provide reasonable and necessary maintenance. About PanaVise\nFounded in 1957 by tool and die maker Otto Colbert and currently headquartered\nin Reno, Nevada, PanaVise is a leader in work holding products. Over the\nyears, a natural outgrowth of this expertise has been continued development of\nother items which hold things securely and offer a wide range of motion.\nImportant areas in which this has been applied include, Electronics, CCTV\nCamera Mounts, and Audio\/Video Mounts, earning PanaVise the nickname the \"the\nhold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn \u0026amp; 360 Rotation\u003c\/li\u003e\n \u003cli\u003eFine\/coarse adjusting knob controls jaw pressure for delicate work\u003c\/li\u003e\n \u003cli\u003eGrooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic\u003c\/li\u003e\n \u003cli\u003eContinuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-01T22:48:00+11:00","created_at":"2021-04-01T22:48:00+11:00","vendor":"Panavise","type":"Bench Vises","tags":["nn05"],"price":21000,"price_min":21000,"price_max":21000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39682695987351,"title":"1-(Pack)","option1":"1-(Pack)","option2":null,"option3":null,"sku":"B000B61D22","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PanaVise Model 201 \"Junior\" Miniature Vise 1-(Pack) - 1-(Pack)","public_title":"1-(Pack)","options":["1-(Pack)"],"price":21000,"weight":671,"compare_at_price":null,"inventory_management":null,"barcode":"729315201017","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000B61D22.jpg?v=1651209680","\/\/newnestshop.com\/cdn\/shop\/products\/513zGPvx8VL.jpg?v=1622419978","\/\/newnestshop.com\/cdn\/shop\/products\/51jzXA5eLPL.jpg?v=1622419978"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000B61D22.jpg?v=1651209680","options":["Size"],"media":[{"alt":"PanaVise Model 201 \"Junior\" Miniature Vise 1-(Pack) - NewNest Australia","id":27764798947479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000B61D22.jpg?v=1651209680"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000B61D22.jpg?v=1651209680","width":1000},{"alt":"PanaVise Model 201 \"Junior\" Miniature Vise 1-(Pack) - NewNest Australia","id":21196085198999,"position":2,"preview_image":{"aspect_ratio":0.998,"height":500,"width":499,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/513zGPvx8VL.jpg?v=1622419978"},"aspect_ratio":0.998,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/513zGPvx8VL.jpg?v=1622419978","width":499},{"alt":"PanaVise Model 201 \"Junior\" Miniature Vise 1-(Pack) - NewNest Australia","id":21196085231767,"position":3,"preview_image":{"aspect_ratio":1.002,"height":499,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51jzXA5eLPL.jpg?v=1622419978"},"aspect_ratio":1.002,"height":499,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51jzXA5eLPL.jpg?v=1622419978","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePanaVise Model 201 \"Junior\" Miniature Vise\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1-(Pack) The PanaVise 201 \"Junior\" miniature vise is a combination of\nquality workmanship and durability, ease of adjustment and available\naccessories. Designed for use in small projects requiring precise soldering,\ngluing and tool work, the 201 Junior miniature vise features tilt\nadjustability up to 210-degrees along with 360-degree turns and rotations,\nfine and course clamping abilities, grooved jaws for easy holding power, heat-\ntolerant jaws, compatibility with other vise components and more. Split-ball\njoint allows the vise head to move across 3-planes. View larger. Turn, Tilt\nand Rotate Clamped Items at Will The PanaVise Model 201 Junior miniature vise\nis a versatile, multi-use mini-vise that is suitable for use in everything\nfrom arts and crafts, to model making, electronics and other small projects.\nLightweight, yet durable, the vise is designed around a vise head assembly\nconstructed of a black glass reinforced thermal composite alloy connected to a\ndie cast zinc base by PanaVise's patented ball joint clamp system, known as a\n\"split-ball.\" The split-ball system not only holds items within the vise head\nassembly securely in position, but also allows for maneuvering of them along\nthree separate planes. The complete range of mobility possible with the split-\nball joint clamp system is a 210-degree tilt to the left or right, along with\neither an angled rotation or level turn range of 360 degrees. This range of\nmobility, especially the large left-to-right tilt, allows you to rearrange\nitems being worked on into virtually any position, limiting the need to adjust\nthe overall position of the vise or the item within the vise. Well-suited to\nsmall precision jobs like arts and crafts, and model making. View larger.\nGrooved jaws and heat tolerance make it good for electronics as well. View\nlarger. The head assembly of the PanaVise 201 Junior miniature vise contains a\nnumber of convenient additional features users will find valuable. The first\nof these revolves around is its ability to securely and safely hold items.\nAlthough the 1\" wide by 2\" tall, the jaws of the 201 Junior miniature vise are\nable to secure both tough small jobs as well as delicate jobs by way of their\ndual adjustment mechanism that allows for both course and fine adjustments. In\naddition, the holding power of the jaws can be softened further with an\noptional padded accessory for holding extremely delicate items (sold\nseparately). Next, the upper ends of both jaws contain grooved ridges. These\nridges are designed for detailed work with flat, angled items like circuit\nboards. Also, since ideal vise uses such as circuit board wiring and jewelry\nmaking, involve soldering, the vise head assembly of the PanaVise 201 Junior\nminiature vise is highly resistant to heat, with a continuous heat tolerance\nto 350 degrees F (177 degrees C) and intermittent heat up to 450 degrees F\n(204 degrees C). Flexible Base Mount Options The PanaVise 201 Junior miniature\nvise offers great flexibility of its mount possibilities. The zinc base\nincluded can be used as a stand-alone support when working with light items,\nor can be used to secure the vise permanently to a flat surface via its three\ncountersunk holes (screws not included). In addition to this, the PanaVise 201\nJunior miniature vise is compatible with a range of base accessories that\nallow for mounting and using your vise wherever your work takes you. Key\nFeatures Multi-use mini-vise suited to small-sized projects like arts and\ncrafts, model making, electronics, jewelry making and more The easy-to-use\n\"split-ball\" adjustment element utilizes single knob controls for head\nmovement through 3-planes Fine\/coarse adjusting knob controls jaw pressure for\ndelicate work Grooved jaws are excellent for holding small objects and are\nmade of reinforced thermal composite plastic Durable, heat-tolerant vise head\nassembly construction The vise features compatibility with all PanaVise base\nmounts and many other accessories Specifications Overall height: 6-3\/4\" (173\nmm) Rotation: 360 degrees Swivel: 360 degrees Pivot: 210 degrees Continuous\nheat tolerance: Up to 350 degrees F (177 degrees C) Intermittent heat\ntolerance: Up to 450 degrees F (204 degrees C) Vise opening: up to 2.875\" (73\nmm) Jaw width: 1\" (25.4 mm) Jaw height: 2\" (50.8 mm) Weight: 1.2 lbs. (0.6 kg)\nBase 4.3125\" (109.5 mm) diameter bolt circle .300\" center hole Three counter\nsunk holes for 1\/4\" (6.3 mm) flathead screws (not included) Compatible with\nother PanaVise base mounts What's in the Box PanaVise model 201 \"Junior\"\nminiature vise (includes model 203 PanaVise head assembly, PanaVise Junior\nbase) User's manual and warranty information Limited Lifetime Warranty All\nPanaVise products are warranted against defective materials and\/or workmanship\nto all original consumer owners from the date of original consumer purchase\nfor the lifetime of ownership by the original consumer owner. In the event of\ndefective materials and\/or workmanship, PanaVise Products, Inc. will, without\ncharge, repair or replace, at its option, the defective product within 60-days\nfrom the receipt of the defective product. The Warranty does not apply to\ndamage not resulting from defective materials and\/or workmanship while in the\npossession of the original consumer or to unreasonable use by the original\nconsumer, which includes but is not limited to improper installation, or\nfailure to provide reasonable and necessary maintenance. About PanaVise\nFounded in 1957 by tool and die maker Otto Colbert and currently headquartered\nin Reno, Nevada, PanaVise is a leader in work holding products. Over the\nyears, a natural outgrowth of this expertise has been continued development of\nother items which hold things securely and offer a wide range of motion.\nImportant areas in which this has been applied include, Electronics, CCTV\nCamera Mounts, and Audio\/Video Mounts, earning PanaVise the nickname the \"the\nhold it anywhere you want it company.\"\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn \u0026amp; 360 Rotation\u003c\/li\u003e\n \u003cli\u003eFine\/coarse adjusting knob controls jaw pressure for delicate work\u003c\/li\u003e\n \u003cli\u003eGrooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic\u003c\/li\u003e\n \u003cli\u003eContinuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)\u003c\/li\u003e\n \u003cli\u003eLimited Lifetime Warranty!\u003c\/li\u003e\n \u003c\/ul\u003e"}
PanaVise Model 201 "Junior" Miniature Vise 1-(Pack) - NewNest Australia

PanaVise Model 201 "Junior" Miniature Vise 1-(Pack)

$210.00 AUD

PanaVise Model 201 "Junior" Miniature Vise Size:1-(Pack) The PanaVise 201 "Junior" miniature vise is a combination of quality workmanship and durability, ease of adjustment and available accessories. Designed for use in small projects requiring precise soldering, gluing and tool work, the 201 Junior miniature vise features tilt adjustability up ...


More Info