{"id":6696817754263,"title":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock","handle":"10-round-center-finder-compass-clear-acrylic-for-drawing-circles-lathe-work-and-woodturners-ideal-for-locating-center-on-logs-and-general-stock-pieces-works-well-on-round-and-square-stock","description":"\u003ch3\u003e10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eIf you have ever tried to use a standard compass to draw a circle on\nirregularly shaped or rough items then you know your results can sometimes be\nmixed at best. Trying to keep the compass centered while making a clearly\nmarked circle can be tough in this situation. The Round, Clear Acrylic Center\nFinder\/Compass solves this issue in a couple of ways. The clear round design\nof the center finder\/compass allows you to see exactly what you are doing and\nassists you with quick and easy placement. Once you locate the spot that you\nwant to center your circle from, use a push pin or brad nail in the center\nhole of the center finder\/compass to hold it in place. Choose the diameter\ncircle you would like to mark, then using a fine pointed pencil or scoring\ntool, mark your circle.The black markings are appear clearly on lighter\ncolored surfaces and line up with a different size diameter holes in 1\/2”\nincrements. You can layout and draw circles from 1” to 10” in diameter. Making\nthis ideal for wood turners, arts, crafts, school projects, rough and finish\ncarpenters or use it anywhere you need to draw a circle. It makes layout and\nfinding the center on many types of objects easy and truly simplified. Works\non wood, plastic, metal, glass, composites and more. It also doubles as a\ncenter finder that works exceptionally well on irregularly shaped items like\nwood logs. When laying out a circle on a log one of the toughest things to do\nis to find the center or cut just the right amount of wood off to create a\n“perfect circle”. The center finder\/compass helps with this by allowing you to\nlay the disc on to the log and easily identify the largest circle possible on\nthe log. This helps produce maximum yield on logs smaller than 10” in\ndiameter. Made from clear, fully transparent acrylic, the center\nfinder\/compass is perfect for many different shop, job site or around the home\napplications. Wherever you need a circle drawn or need to find center on\nirregularly shaped items this cent\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIf you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder\/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.\u003c\/li\u003e\n \u003cli\u003eThe clear round design of the center finder\/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder\/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.\u003c\/li\u003e\n \u003cli\u003eThe black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1\/2 increments. You can layout and draw circles from 1 to 10 in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many types of objects easy and truly simplified. Works on wood, poster board, plastic, metal, glass, composites and more!\u003c\/li\u003e\n \u003cli\u003eIt also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a perfect circle. The center finder\/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10 in diameter.\u003c\/li\u003e\n \u003cli\u003eMade from clear, fully transparent acrylic, the center finder\/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder\/compass is the tool to reach for.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:08:56+10:00","created_at":"2021-04-07T23:08:56+10:00","vendor":"Fulton","type":"Accessories","tags":["nn05"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735772610711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00JJZAF8E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock","public_title":null,"options":["Default Title"],"price":13900,"weight":340,"compare_at_price":null,"inventory_management":null,"barcode":"814310017135","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00JJZAF8E.jpg?v=1651233669","\/\/newnestshop.com\/cdn\/shop\/products\/81tc7130TSL.jpg?v=1622444288","\/\/newnestshop.com\/cdn\/shop\/products\/81Z4HXH1PuL.jpg?v=1622444288","\/\/newnestshop.com\/cdn\/shop\/products\/81SU6BgvuRL.jpg?v=1622444288","\/\/newnestshop.com\/cdn\/shop\/products\/71mLS709chL.jpg?v=1622444288","\/\/newnestshop.com\/cdn\/shop\/products\/71bk_2BMevQ4L.jpg?v=1622444288"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00JJZAF8E.jpg?v=1651233669","options":["Title"],"media":[{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":27770206191767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00JJZAF8E.jpg?v=1651233669"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00JJZAF8E.jpg?v=1651233669","width":2000},{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":21308072001687,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tc7130TSL.jpg?v=1622444288"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81tc7130TSL.jpg?v=1622444288","width":2000},{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":21308072034455,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Z4HXH1PuL.jpg?v=1622444288"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Z4HXH1PuL.jpg?v=1622444288","width":2000},{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":21308072067223,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81SU6BgvuRL.jpg?v=1622444288"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81SU6BgvuRL.jpg?v=1622444288","width":2000},{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":21308072099991,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71mLS709chL.jpg?v=1622444288"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71mLS709chL.jpg?v=1622444288","width":2000},{"alt":"10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock - NewNest Australia","id":21308072132759,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71bk_2BMevQ4L.jpg?v=1622444288"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71bk_2BMevQ4L.jpg?v=1622444288","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e10\" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eIf you have ever tried to use a standard compass to draw a circle on\nirregularly shaped or rough items then you know your results can sometimes be\nmixed at best. Trying to keep the compass centered while making a clearly\nmarked circle can be tough in this situation. The Round, Clear Acrylic Center\nFinder\/Compass solves this issue in a couple of ways. The clear round design\nof the center finder\/compass allows you to see exactly what you are doing and\nassists you with quick and easy placement. Once you locate the spot that you\nwant to center your circle from, use a push pin or brad nail in the center\nhole of the center finder\/compass to hold it in place. Choose the diameter\ncircle you would like to mark, then using a fine pointed pencil or scoring\ntool, mark your circle.The black markings are appear clearly on lighter\ncolored surfaces and line up with a different size diameter holes in 1\/2”\nincrements. You can layout and draw circles from 1” to 10” in diameter. Making\nthis ideal for wood turners, arts, crafts, school projects, rough and finish\ncarpenters or use it anywhere you need to draw a circle. It makes layout and\nfinding the center on many types of objects easy and truly simplified. Works\non wood, plastic, metal, glass, composites and more. It also doubles as a\ncenter finder that works exceptionally well on irregularly shaped items like\nwood logs. When laying out a circle on a log one of the toughest things to do\nis to find the center or cut just the right amount of wood off to create a\n“perfect circle”. The center finder\/compass helps with this by allowing you to\nlay the disc on to the log and easily identify the largest circle possible on\nthe log. This helps produce maximum yield on logs smaller than 10” in\ndiameter. Made from clear, fully transparent acrylic, the center\nfinder\/compass is perfect for many different shop, job site or around the home\napplications. Wherever you need a circle drawn or need to find center on\nirregularly shaped items this cent\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIf you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder\/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.\u003c\/li\u003e\n \u003cli\u003eThe clear round design of the center finder\/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder\/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.\u003c\/li\u003e\n \u003cli\u003eThe black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1\/2 increments. You can layout and draw circles from 1 to 10 in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many types of objects easy and truly simplified. Works on wood, poster board, plastic, metal, glass, composites and more!\u003c\/li\u003e\n \u003cli\u003eIt also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a perfect circle. The center finder\/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10 in diameter.\u003c\/li\u003e\n \u003cli\u003eMade from clear, fully transparent acrylic, the center finder\/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder\/compass is the tool to reach for.\u003c\/li\u003e\n \u003c\/ul\u003e"}
10" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock
10" Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock
If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can sometimes be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue in a couple of ways. The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick and easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool, mark your circle.The black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1/2” increments. You can layout and draw circles from 1” to 10” in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many types of objects easy and truly simplified. Works on wood, plastic, metal, glass, composites and more. It also doubles as a center finder that works exceptionally well on irregularly shaped items like wood logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a “perfect circle”. The center finder/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This helps produce maximum yield on logs smaller than 10” in diameter. Made from clear, fully transparent acrylic, the center finder/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this cent
Product Features
- If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.
- The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.
- The black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1/2 increments. You can layout and draw circles from 1 to 10 in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many types of objects easy and truly simplified. Works on wood, poster board, plastic, metal, glass, composites and more!
- It also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a perfect circle. The center finder/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10 in diameter.
- Made from clear, fully transparent acrylic, the center finder/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder/compass is the tool to reach for.
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.
Related Products
Robert Larson 800-2875 Plastic C...
$94.00 AUD
{"id":6696910094487,"title":"Robert Larson 800-2875 Plastic Center Finder 1 PACK","handle":"robert-larson-800-2875-plastic-center-finder-1-pack","description":"\u003ch3\u003eRobert Larson 800-2875 Plastic Center Finder\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1 PACK Finds exact center in seconds with no\ncalculations. Gives center of round, square, hexagon, and octagon stock for\nturning in a lathe or other purposes. Maximum 8\" circle and octagon, 8\"\nsquare, and 5-3\/4\" hexagon. No. 800-2875: Material: Plastic, Size: 8\" From the\nManufacturer Particularly useful for wood turners, as well as any woodworker\nneeding to quickly find the center of a piece of wood. This tool can be used\nto find the exact center of round, hexagonal and octagonal stock.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRound stock capacity 8\u003c\/li\u003e\n \u003cli\u003eOctagon stock capacity 8\u003c\/li\u003e\n \u003cli\u003eHexagon stock capacity 5 3\/4\u003c\/li\u003e\n \u003cli\u003eSquare capacity 8\u003c\/li\u003e\n \u003cli\u003eHandy for all woodworkers\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:29:27+10:00","created_at":"2021-04-07T23:29:27+10:00","vendor":"Beadsmith","type":"Accessories","tags":["nn05"],"price":9400,"price_min":9400,"price_max":9400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735934353559,"title":"1 PACK","option1":"1 PACK","option2":null,"option3":null,"sku":"B000CD1T0A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Robert Larson 800-2875 Plastic Center Finder 1 PACK - 1 PACK","public_title":"1 PACK","options":["1 PACK"],"price":9400,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"744391116840","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000CD1T0A.jpg?v=1651234926"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000CD1T0A.jpg?v=1651234926","options":["Size"],"media":[{"alt":"Robert Larson 800-2875 Plastic Center Finder 1 PACK - NewNest Australia","id":27770371997847,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000CD1T0A.jpg?v=1651234926"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000CD1T0A.jpg?v=1651234926","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eRobert Larson 800-2875 Plastic Center Finder\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1 PACK Finds exact center in seconds with no\ncalculations. Gives center of round, square, hexagon, and octagon stock for\nturning in a lathe or other purposes. Maximum 8\" circle and octagon, 8\"\nsquare, and 5-3\/4\" hexagon. No. 800-2875: Material: Plastic, Size: 8\" From the\nManufacturer Particularly useful for wood turners, as well as any woodworker\nneeding to quickly find the center of a piece of wood. This tool can be used\nto find the exact center of round, hexagonal and octagonal stock.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRound stock capacity 8\u003c\/li\u003e\n \u003cli\u003eOctagon stock capacity 8\u003c\/li\u003e\n \u003cli\u003eHexagon stock capacity 5 3\/4\u003c\/li\u003e\n \u003cli\u003eSquare capacity 8\u003c\/li\u003e\n \u003cli\u003eHandy for all woodworkers\u003c\/li\u003e\n \u003c\/ul\u003e"}
Robert Larson 800-2875 Plastic Center Finder 1 PACK
$94.00 AUD
Robert Larson 800-2875 Plastic Center Finder Size:1 PACK Finds exact center in seconds with no calculations. Gives center of round, square, hexagon, and octagon stock for turning in a lathe or other purposes. Maximum 8" circle and octagon, 8" square, and 5-3/4" hexagon. No. 800-2875: Material: Plastic, Size: 8" From the Manufacturer Particularl...
JWGJW 120034 Tooling Package Min...
$216.00 AUD
{"id":6696861466775,"title":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder","handle":"jwgjw-120034-tooling-package-mini-lathe-quick-change-tool-post-holders-multifid-tool-holder","description":"\u003ch3\u003eJWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026amp; Holders Multifid Tool Holder\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: Quick change Tool Post is the main\naccessory of engine lathe, consists of a Tool Post and the holder of several\ncomposition.Workpiece as required, select the appropriate toolholder. Eeset\naccuracy within 0.004\" range JWGJW Quick Change Tool Post Product description:\n1).Fits 7x10, 7x12, 7x14, 7x16, 9x16\" etc mini lathes. 2). Using the dial,\noperations with extension units, can be processed various angles workpiece.\n3). The Tool Post, high stability processing. Each changing tools only takes a\nfew seconds. Toolholder for the adjusting screw nut and tool, adjust\ninstallation height , easy to operate, shortening the time loaded knife.\nToolholder for the adjusting screw nut and tool, adjust installation height ,\neasy to operate, shortening the time loaded knife. Read more Product\nadvantages: It implements the external machine loaded knife, the holder is\nmounted on the tool holder through dovetail. Tool change rapid, high\npositioning accuracy, high rigidity and other characteristics, is an\nalternative to the traditional square tool holder, the ideal product for fast\nturning. JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post\nJWGJW-120034 It can be cylindrical, grooving, cutting, knurling, drilling,\nreaming and other processing. Set includes: ◆ 1x Tool Post ◆ 1x 3\/8\" boring\nholder ◆ 1x 1\/2\" capacity cut-off blade holder ◆ 2x 1\/4-3\/8\" turning \u0026amp; facing\nholders ◆ 2x mounting bolts (M8 \u0026amp; M10) ◆ 2x Allen Key with six corner plate\nhand Read more JWGJW 120025 Spray Guide Accessory Tool for All Airless Paint\nSprayer JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post JWGJW\n120026 6-12\" Quick Change Tool Post Set,6-PCS JWGJW 3\/8\" Indexable Machine\nTurning Holder JWGJW Airless Paint Spray Gun With 517 Tip for Graco Wagner\nTitan Sprayer\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMaterial: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining.\u003c\/li\u003e\n \u003cli\u003eThis is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder\u003c\/li\u003e\n \u003cli\u003eReplace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved.\u003c\/li\u003e\n \u003cli\u003eSet includes: 1x Tool Post 1x 3\/8\" boring holder, 1x 1\/2\" capacity cut-off blade holder, 2x 1\/4-3\/8\" turning \u0026amp; facing holders, 2x Mounting bolts (M8 \u0026amp; M10), 2x Allen Key\u003c\/li\u003e\n \u003cli\u003eSilver parts are made of aluminum, The black part is made of iron\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T23:18:02+10:00","created_at":"2021-04-07T23:18:02+10:00","vendor":"JWGJW","type":"Turning Tools","tags":["nn05"],"price":21600,"price_min":21600,"price_max":21600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735852335255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B018QMTXB0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder","public_title":null,"options":["Default Title"],"price":21600,"weight":680,"compare_at_price":null,"inventory_management":null,"barcode":"703341919863","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B018QMTXB0.jpg?v=1651234310","\/\/newnestshop.com\/cdn\/shop\/products\/513VIGyfi8L.jpg?v=1622444887","\/\/newnestshop.com\/cdn\/shop\/products\/41yMmUMS7EL.jpg?v=1622444887","\/\/newnestshop.com\/cdn\/shop\/products\/81rZLIXbzHL.jpg?v=1622444887","\/\/newnestshop.com\/cdn\/shop\/products\/71hmwuspMkL.jpg?v=1622444887","\/\/newnestshop.com\/cdn\/shop\/products\/51BlLWHFl2L.jpg?v=1622444887","\/\/newnestshop.com\/cdn\/shop\/products\/71j7xG75s8L.jpg?v=1622444887"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B018QMTXB0.jpg?v=1651234310","options":["Title"],"media":[{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":27770290405527,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B018QMTXB0.jpg?v=1651234310"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B018QMTXB0.jpg?v=1651234310","width":1500},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524789911,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/513VIGyfi8L.jpg?v=1622444887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/513VIGyfi8L.jpg?v=1622444887","width":500},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524822679,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41yMmUMS7EL.jpg?v=1622444887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41yMmUMS7EL.jpg?v=1622444887","width":500},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524855447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81rZLIXbzHL.jpg?v=1622444887"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81rZLIXbzHL.jpg?v=1622444887","width":2560},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524888215,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71hmwuspMkL.jpg?v=1622444887"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71hmwuspMkL.jpg?v=1622444887","width":1500},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524920983,"position":6,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51BlLWHFl2L.jpg?v=1622444887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51BlLWHFl2L.jpg?v=1622444887","width":500},{"alt":"JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026 Holders Multifid Tool Holder - NewNest Australia","id":21308524953751,"position":7,"preview_image":{"aspect_ratio":1.001,"height":1499,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71j7xG75s8L.jpg?v=1622444887"},"aspect_ratio":1.001,"height":1499,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71j7xG75s8L.jpg?v=1622444887","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eJWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post \u0026amp; Holders Multifid Tool Holder\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Note: Quick change Tool Post is the main\naccessory of engine lathe, consists of a Tool Post and the holder of several\ncomposition.Workpiece as required, select the appropriate toolholder. Eeset\naccuracy within 0.004\" range JWGJW Quick Change Tool Post Product description:\n1).Fits 7x10, 7x12, 7x14, 7x16, 9x16\" etc mini lathes. 2). Using the dial,\noperations with extension units, can be processed various angles workpiece.\n3). The Tool Post, high stability processing. Each changing tools only takes a\nfew seconds. Toolholder for the adjusting screw nut and tool, adjust\ninstallation height , easy to operate, shortening the time loaded knife.\nToolholder for the adjusting screw nut and tool, adjust installation height ,\neasy to operate, shortening the time loaded knife. Read more Product\nadvantages: It implements the external machine loaded knife, the holder is\nmounted on the tool holder through dovetail. Tool change rapid, high\npositioning accuracy, high rigidity and other characteristics, is an\nalternative to the traditional square tool holder, the ideal product for fast\nturning. JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post\nJWGJW-120034 It can be cylindrical, grooving, cutting, knurling, drilling,\nreaming and other processing. Set includes: ◆ 1x Tool Post ◆ 1x 3\/8\" boring\nholder ◆ 1x 1\/2\" capacity cut-off blade holder ◆ 2x 1\/4-3\/8\" turning \u0026amp; facing\nholders ◆ 2x mounting bolts (M8 \u0026amp; M10) ◆ 2x Allen Key with six corner plate\nhand Read more JWGJW 120025 Spray Guide Accessory Tool for All Airless Paint\nSprayer JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post JWGJW\n120026 6-12\" Quick Change Tool Post Set,6-PCS JWGJW 3\/8\" Indexable Machine\nTurning Holder JWGJW Airless Paint Spray Gun With 517 Tip for Graco Wagner\nTitan Sprayer\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMaterial: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining.\u003c\/li\u003e\n \u003cli\u003eThis is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder\u003c\/li\u003e\n \u003cli\u003eReplace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved.\u003c\/li\u003e\n \u003cli\u003eSet includes: 1x Tool Post 1x 3\/8\" boring holder, 1x 1\/2\" capacity cut-off blade holder, 2x 1\/4-3\/8\" turning \u0026amp; facing holders, 2x Mounting bolts (M8 \u0026amp; M10), 2x Allen Key\u003c\/li\u003e\n \u003cli\u003eSilver parts are made of aluminum, The black part is made of iron\u003c\/li\u003e\n \u003c\/ul\u003e"}
JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder
$216.00 AUD
JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder Read more Note: Quick change Tool Post is the main accessory of engine lathe, consists of a Tool Post and the holder of several composition.Workpiece as required, select the appropriate toolholder. Eeset accuracy within 0.004" range JWGJW Quick Chan...
HHIP 2000-7025 1/8 x 1/2 x...
$121.00 AUD
{"id":6692493918359,"title":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt","handle":"hhip-2000-7025-1-8-x-1-2-x-4-1-2-inch-5-cobalt-p3s-style-parallel-type-cut-off-blade-1-8-x-1-2-x-4-1-2-p3s-style-8-cobalt","description":"\u003ch3\u003eHHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\/8\" x 1\/2\" x 4-1\/2\" | Style:P3S Style, 8% Cobalt 1\/8 X 1\/2 X 4-1\/2\" P3S\n5% Cobalt Parallel Cut-Off Blade (2000-7025) Superior type of high speed steel\nwhich works better in high heat applications. Use this type of blade for heavy\ncuts in hard materials. Parallel style blades have continuous width of cutting\nedge throughout length of blade. Can be used with Aloris, DORIAN \u0026amp; KDK type\nquick-change tool holders. Chip breaker groove ground along the top length of\nthe blade. One beveled end, one square end.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eParallel Style P3S\u003c\/li\u003e\n \u003cli\u003e5% Cobalt\u003c\/li\u003e\n \u003cli\u003eOne beveled end, one square end.\u003c\/li\u003e\n \u003cli\u003eThis tool bit makes a superior finishing tool.\u003c\/li\u003e\n \u003cli\u003eChip breaker groove ground along the top length of the blade.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T21:19:44+10:00","created_at":"2021-04-06T21:19:44+10:00","vendor":"HHIP","type":"Turning Tools","tags":["nn05"],"price":12100,"price_min":12100,"price_max":12100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725760315543,"title":"1\/8\" x 1\/2\" x 4-1\/2\" \/ P3S Style, 8% Cobalt","option1":"1\/8\" x 1\/2\" x 4-1\/2\"","option2":"P3S Style, 8% Cobalt","option3":null,"sku":"B00N405KBW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - 1\/8\" x 1\/2\" x 4-1\/2\" \/ P3S Style, 8% Cobalt","public_title":"1\/8\" x 1\/2\" x 4-1\/2\" \/ P3S Style, 8% Cobalt","options":["1\/8\" x 1\/2\" x 4-1\/2\"","P3S Style, 8% Cobalt"],"price":12100,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"769053004723","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B00N405KBW.jpg?v=1651229967","\/\/newnestshop.com\/cdn\/shop\/products\/51zfFRWyc9L.jpg?v=1622440578","\/\/newnestshop.com\/cdn\/shop\/products\/51cHGb1p3wL.jpg?v=1622440578","\/\/newnestshop.com\/cdn\/shop\/products\/41Dz3Cwx2hL.jpg?v=1622440578","\/\/newnestshop.com\/cdn\/shop\/products\/41KkAF_2Bc0_2BL.jpg?v=1622440578","\/\/newnestshop.com\/cdn\/shop\/products\/41Q9WG8ydOL.jpg?v=1622440578"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B00N405KBW.jpg?v=1651229967","options":["Size","Style"],"media":[{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":27769423691927,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00N405KBW.jpg?v=1651229967"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B00N405KBW.jpg?v=1651229967","width":2560},{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":21266567659671,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51zfFRWyc9L.jpg?v=1622440578"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51zfFRWyc9L.jpg?v=1622440578","width":1500},{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":21266567692439,"position":3,"preview_image":{"aspect_ratio":1.94,"height":535,"width":1038,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51cHGb1p3wL.jpg?v=1622440578"},"aspect_ratio":1.94,"height":535,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51cHGb1p3wL.jpg?v=1622440578","width":1038},{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":21266567725207,"position":4,"preview_image":{"aspect_ratio":1.259,"height":844,"width":1063,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41Dz3Cwx2hL.jpg?v=1622440578"},"aspect_ratio":1.259,"height":844,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41Dz3Cwx2hL.jpg?v=1622440578","width":1063},{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":21266567757975,"position":5,"preview_image":{"aspect_ratio":1.176,"height":926,"width":1089,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41KkAF_2Bc0_2BL.jpg?v=1622440578"},"aspect_ratio":1.176,"height":926,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41KkAF_2Bc0_2BL.jpg?v=1622440578","width":1089},{"alt":"HHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1\/8\" x 1\/2\" x 4-1\/2\" P3S Style, 8% Cobalt - NewNest Australia","id":21266567790743,"position":6,"preview_image":{"aspect_ratio":1.209,"height":858,"width":1037,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/41Q9WG8ydOL.jpg?v=1622440578"},"aspect_ratio":1.209,"height":858,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/41Q9WG8ydOL.jpg?v=1622440578","width":1037}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHHIP 2000-7025 1\/8 x 1\/2 x 4-1\/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\/8\" x 1\/2\" x 4-1\/2\" | Style:P3S Style, 8% Cobalt 1\/8 X 1\/2 X 4-1\/2\" P3S\n5% Cobalt Parallel Cut-Off Blade (2000-7025) Superior type of high speed steel\nwhich works better in high heat applications. Use this type of blade for heavy\ncuts in hard materials. Parallel style blades have continuous width of cutting\nedge throughout length of blade. Can be used with Aloris, DORIAN \u0026amp; KDK type\nquick-change tool holders. Chip breaker groove ground along the top length of\nthe blade. One beveled end, one square end.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eParallel Style P3S\u003c\/li\u003e\n \u003cli\u003e5% Cobalt\u003c\/li\u003e\n \u003cli\u003eOne beveled end, one square end.\u003c\/li\u003e\n \u003cli\u003eThis tool bit makes a superior finishing tool.\u003c\/li\u003e\n \u003cli\u003eChip breaker groove ground along the top length of the blade.\u003c\/li\u003e\n \u003c\/ul\u003e"}
HHIP 2000-7025 1/8 x 1/2 x 4-1/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade 1/8" x 1/2" x 4-1/2" P3S Style, 8% Cobalt
$121.00 AUD
HHIP 2000-7025 1/8 x 1/2 x 4-1/2 Inch 5% Cobalt P3S Style Parallel Type Cut-Off Blade Size:1/8" x 1/2" x 4-1/2" | Style:P3S Style, 8% Cobalt 1/8 X 1/2 X 4-1/2" P3S 5% Cobalt Parallel Cut-Off Blade (2000-7025) Superior type of high speed steel which works better in high heat applications. Use this type of blade for heavy cuts in hard materials. P...
PSI Woodworking LCENTSS22 No. 2 ...
$155.00 AUD
{"id":6692201365655,"title":"PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center 1\" Crown","handle":"psi-woodworking-lcentss22-no-2-mt-with-1-inch-crown-super-wood-lathe-drive-center-1-crown","description":"\u003ch3\u003ePSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\" Crown Get a better bite on your spindle with PSI's new 1' Super\nCenter. More teeth give a better bite while providing equal pressure and a\npositive drive. There is no need to hammer your drive center into the work\npiece and risk splitting your work. The PSI Super Center Crown compatible with\nheadstocks with 2MT spindles. Spring loaded point simplifies spindle\ncentering and retracts to avoid splitting your work when tailstock pressure is\napplied. Ships in plastic production sleeves at 4.8-ounces. 4.5\" by 1.5\" by\n1.5\" with a 1-inch crown.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe PSI Super Center Crown compatible with headstocks with #2MT spindles\u003c\/li\u003e\n \u003cli\u003eGet a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive\u003c\/li\u003e\n \u003cli\u003eSpring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied\u003c\/li\u003e\n \u003cli\u003eShips in plastic production sleeves at 4.8-ounces\u003c\/li\u003e\n \u003cli\u003e4.5-by-1.5-by-1.5-inches with 1-inch crown\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-06T20:31:10+10:00","created_at":"2021-04-06T20:31:10+10:00","vendor":"PSI Woodworking","type":"Accessories","tags":["nn05"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39725176193175,"title":"1\" Crown","option1":"1\" Crown","option2":null,"option3":null,"sku":"B000KICD52","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center 1\" Crown - 1\" Crown","public_title":"1\" Crown","options":["1\" Crown"],"price":15500,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"689076541091","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000KICD52.jpg?v=1651227103"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KICD52.jpg?v=1651227103","options":["Size"],"media":[{"alt":"PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center 1\" Crown - NewNest Australia","id":27768787239063,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KICD52.jpg?v=1651227103"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KICD52.jpg?v=1651227103","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\" Crown Get a better bite on your spindle with PSI's new 1' Super\nCenter. More teeth give a better bite while providing equal pressure and a\npositive drive. There is no need to hammer your drive center into the work\npiece and risk splitting your work. The PSI Super Center Crown compatible with\nheadstocks with 2MT spindles. Spring loaded point simplifies spindle\ncentering and retracts to avoid splitting your work when tailstock pressure is\napplied. Ships in plastic production sleeves at 4.8-ounces. 4.5\" by 1.5\" by\n1.5\" with a 1-inch crown.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe PSI Super Center Crown compatible with headstocks with #2MT spindles\u003c\/li\u003e\n \u003cli\u003eGet a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive\u003c\/li\u003e\n \u003cli\u003eSpring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied\u003c\/li\u003e\n \u003cli\u003eShips in plastic production sleeves at 4.8-ounces\u003c\/li\u003e\n \u003cli\u003e4.5-by-1.5-by-1.5-inches with 1-inch crown\u003c\/li\u003e\n \u003c\/ul\u003e"}
PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center 1" Crown
$155.00 AUD
PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center Size:1" Crown Get a better bite on your spindle with PSI's new 1' Super Center. More teeth give a better bite while providing equal pressure and a positive drive. There is no need to hammer your drive center into the work piece and risk splitting your work. The PS...
Wheel Marking Gauge Kit - 2...
$196.00 AUD
{"id":6688997965975,"title":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork","handle":"wheel-marking-gauge-kit-2-extra-cutter-wheels-roll-stop-head-micro-adjuster-metric-imperial-ruler-7-brass-marker-tool-for-woodwork","description":"\u003ch3\u003eWheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWant to make precise and accurate markings on wood for your woodworking\nprojects? Marking gauges are essential tools used for woodworking projects.\nTypical gauges rely on small spurs to create straight marks on wood. These\ntools are usually made of wood that can warp over time, and they also lack a\nmeasuring scale. If you are looking for a durable and reliable marking gauge\nthat delivers accurate markings and measurements, this hardened steel and\nbrass wheel gauge is what you need. Create sharp and crisp lines on wood with\nthe Clarke Brothers Wheel Marking Gauge Set. Need a marking gauge that keeps\nup with all your woodworking tasks? This 7\" wheel marking gauge features a\nsolid brass body, which will withstand daily use in your shop. The cutter\nwheel, on the other hand, is made of hardened steel that stays sharp for\nlonger periods of time. Make precisely measured cuts with this wheel gauge.\nIts body features graduated metric and imperial markings, allowing you to\ncreate accurate wood cuts each time. To set the gauge, loosen the thumbscrews\ncounter-clockwise about half a turn. Release the rod by holding the body with\none hand and tighten the thumbscrew to your desired projection. Need more time\nto make a decision? Here are more reasons to love this wheel marking gauge: 👍\nWheel cutter retracts into the gauge face for upright storage 👍 Nylon set\nscrew under the fence to adjust sliding resistance 👍 Includes 2 extra steel\nwheel cutters 👍 Grooved steel beam to prevent head rotation during adjustments\nUnlock pinpoint precision for your woodworking projects. Add the Clarke\nBrothers Wheel Marking Gauge Set to your cart TODAY!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMAKE ACCURATE MARKINGS - To ensure precise markings, this brass wheel marking gauge features an engraved graduated ruler, which shows both metric and imperial measurement values.\u003c\/li\u003e\n \u003cli\u003eREADY FOR EVERYDAY USE - Unlike other gauges that easily warp or break, this marking wheel gauge is built to last a lifetime, thanks to its solid brass body and hardened steel cutter.\u003c\/li\u003e\n \u003cli\u003eFINE CUTTING WHEEL ADJUSTMENTS - The marking gauge wheel is fitted with a micro-adjustable fence with 2 thumbscrews, which will make it easier for you to take measurements with pinpoint accuracy.\u003c\/li\u003e\n \u003cli\u003eANTI-ROLL DESIGN - Keep this wheel marking gauge from rolling off of your work bench. It houses an anti-roll brass fence with 2 flat spots on the head to keep the gauge from rolling around.\u003c\/li\u003e\n \u003cli\u003eEASY TO SET - The marking tool is fitted with sturdy knobs that ensure easy adjustments. The rod features a V-shaped slot that prevents the fence and tail from wiggling or wobbling during use.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:53:24+10:00","created_at":"2021-04-05T19:53:24+10:00","vendor":"Clarke Brothers","type":"Turning Tools","tags":["nn05"],"price":19600,"price_min":19600,"price_max":19600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717964021911,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07B8RX4NB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork","public_title":null,"options":["Default Title"],"price":19600,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"670875893412","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07B8RX4NB.jpg?v=1651224994","\/\/newnestshop.com\/cdn\/shop\/products\/61djNOSH8gL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/71O4B3_2BR_2BKL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/81J4x8aBwhL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/71WoUgSOnsL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/61GKQTA0IzL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/61JLc-wK_2BZL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/61Bbcq1BUZL.jpg?v=1622435619","\/\/newnestshop.com\/cdn\/shop\/products\/81OxLxU-EkL.jpg?v=1622435619"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07B8RX4NB.jpg?v=1651224994","options":["Title"],"media":[{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":27768561369239,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07B8RX4NB.jpg?v=1651224994"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07B8RX4NB.jpg?v=1651224994","width":1200},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314103959,"position":2,"preview_image":{"aspect_ratio":1.14,"height":1028,"width":1172,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61djNOSH8gL.jpg?v=1622435619"},"aspect_ratio":1.14,"height":1028,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61djNOSH8gL.jpg?v=1622435619","width":1172},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314136727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71O4B3_2BR_2BKL.jpg?v=1622435619"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71O4B3_2BR_2BKL.jpg?v=1622435619","width":2000},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314169495,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81J4x8aBwhL.jpg?v=1622435619"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81J4x8aBwhL.jpg?v=1622435619","width":2000},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314202263,"position":5,"preview_image":{"aspect_ratio":1.511,"height":1324,"width":2000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71WoUgSOnsL.jpg?v=1622435619"},"aspect_ratio":1.511,"height":1324,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71WoUgSOnsL.jpg?v=1622435619","width":2000},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314235031,"position":6,"preview_image":{"aspect_ratio":1.333,"height":934,"width":1245,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61GKQTA0IzL.jpg?v=1622435619"},"aspect_ratio":1.333,"height":934,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61GKQTA0IzL.jpg?v=1622435619","width":1245},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314267799,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61JLc-wK_2BZL.jpg?v=1622435619"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61JLc-wK_2BZL.jpg?v=1622435619","width":1600},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314300567,"position":8,"preview_image":{"aspect_ratio":1.333,"height":933,"width":1244,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Bbcq1BUZL.jpg?v=1622435619"},"aspect_ratio":1.333,"height":933,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/61Bbcq1BUZL.jpg?v=1622435619","width":1244},{"alt":"Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork - NewNest Australia","id":21252314333335,"position":9,"preview_image":{"aspect_ratio":1.989,"height":1287,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81OxLxU-EkL.jpg?v=1622435619"},"aspect_ratio":1.989,"height":1287,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81OxLxU-EkL.jpg?v=1622435619","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eWheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eWant to make precise and accurate markings on wood for your woodworking\nprojects? Marking gauges are essential tools used for woodworking projects.\nTypical gauges rely on small spurs to create straight marks on wood. These\ntools are usually made of wood that can warp over time, and they also lack a\nmeasuring scale. If you are looking for a durable and reliable marking gauge\nthat delivers accurate markings and measurements, this hardened steel and\nbrass wheel gauge is what you need. Create sharp and crisp lines on wood with\nthe Clarke Brothers Wheel Marking Gauge Set. Need a marking gauge that keeps\nup with all your woodworking tasks? This 7\" wheel marking gauge features a\nsolid brass body, which will withstand daily use in your shop. The cutter\nwheel, on the other hand, is made of hardened steel that stays sharp for\nlonger periods of time. Make precisely measured cuts with this wheel gauge.\nIts body features graduated metric and imperial markings, allowing you to\ncreate accurate wood cuts each time. To set the gauge, loosen the thumbscrews\ncounter-clockwise about half a turn. Release the rod by holding the body with\none hand and tighten the thumbscrew to your desired projection. Need more time\nto make a decision? Here are more reasons to love this wheel marking gauge: 👍\nWheel cutter retracts into the gauge face for upright storage 👍 Nylon set\nscrew under the fence to adjust sliding resistance 👍 Includes 2 extra steel\nwheel cutters 👍 Grooved steel beam to prevent head rotation during adjustments\nUnlock pinpoint precision for your woodworking projects. Add the Clarke\nBrothers Wheel Marking Gauge Set to your cart TODAY!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMAKE ACCURATE MARKINGS - To ensure precise markings, this brass wheel marking gauge features an engraved graduated ruler, which shows both metric and imperial measurement values.\u003c\/li\u003e\n \u003cli\u003eREADY FOR EVERYDAY USE - Unlike other gauges that easily warp or break, this marking wheel gauge is built to last a lifetime, thanks to its solid brass body and hardened steel cutter.\u003c\/li\u003e\n \u003cli\u003eFINE CUTTING WHEEL ADJUSTMENTS - The marking gauge wheel is fitted with a micro-adjustable fence with 2 thumbscrews, which will make it easier for you to take measurements with pinpoint accuracy.\u003c\/li\u003e\n \u003cli\u003eANTI-ROLL DESIGN - Keep this wheel marking gauge from rolling off of your work bench. It houses an anti-roll brass fence with 2 flat spots on the head to keep the gauge from rolling around.\u003c\/li\u003e\n \u003cli\u003eEASY TO SET - The marking tool is fitted with sturdy knobs that ensure easy adjustments. The rod features a V-shaped slot that prevents the fence and tail from wiggling or wobbling during use.\u003c\/li\u003e\n \u003c\/ul\u003e"}
Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork
$196.00 AUD
Wheel Marking Gauge Kit - 2 Extra Cutter Wheels, Roll Stop Head, Micro Adjuster, Metric Imperial Ruler, 7'' Brass Marker Tool for Woodwork Want to make precise and accurate markings on wood for your woodworking projects? Marking gauges are essential tools used for woodworking projects. Typical gauges rely on small spurs to create straight marks ...
Lathe Threading Tool SER1010H11+...
$237.00 AUD
{"id":6688953303191,"title":"Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR","handle":"lathe-threading-tool-ser1010h11-snr0010k11-inserts-5pcs-11er-ag60-5pcs-11ir-ag60-for-boring-bar-holder-cnc-turning-tool-ser1010h11-snr0010k11-5pcs-11er-5pcs-11ir","description":"\u003ch3\u003eLathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR Specifications: Material:\nmetal. Length: 100mm\/125mm. Insert Color: Golden. Accept Insert: 11ER AG60\/\n11IR AG60 Notes: Due to the light and screen setting difference, the item's\ncolor may be slightly different from the pictures. Please allow slight\ndimension difference due to different manual measurement. Color of Wrench and\npakage box is delivered by random ,if you buy more than one,you may receive\nthe same color or multiple colors. Package include: 1 x SER1010H11 External\nTurning Holder 1 x SNR0010K11 Boring Bar 2 x T8 wrench. 5 x 11 ER AG60\nThreading Insert. 5 x 11 IR AG60 Threading Inserts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1Package: 1pc SER1010H11 Lathe Threading Tool, 1pc SNR0010K11 Boring Bar, 5Pcs 11ER AG60 Threading Inserts, and 5Pcs 11IR AG60 Carbide Inserts, 2pcs T8 wrench\u003c\/li\u003e\n \u003cli\u003e2The parts have good rigidity, long service life and lower the cost of tools.\u003c\/li\u003e\n \u003cli\u003e3Features high grip strength, impact resistance, fast cutting and processing\u003c\/li\u003e\n \u003cli\u003e4It is convenient for the user to clamp and replace, and only a wrench is needed to complete the replacement of the blade and blade pad.\u003c\/li\u003e\n \u003cli\u003e5Practical and diverse processing environment, even in very dirty environment such as cast iron, also has very good characteristics.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:31:42+10:00","created_at":"2021-04-05T19:31:42+10:00","vendor":"YOYO TOOLS","type":"Turning Tools","tags":["nn05"],"price":23700,"price_min":23700,"price_max":23700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717879480471,"title":"SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR","option1":"SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR","option2":null,"option3":null,"sku":"B07WVVZTKT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR - SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR","public_title":"SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR","options":["SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR"],"price":23700,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"YOYO","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07WVVZTKT.jpg?v=1651223634","\/\/newnestshop.com\/cdn\/shop\/products\/513aJwAAcXL.jpg?v=1622434286","\/\/newnestshop.com\/cdn\/shop\/products\/51rPZ2RtzzL.jpg?v=1622434286"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07WVVZTKT.jpg?v=1651223634","options":["Size"],"media":[{"alt":"Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR - NewNest Australia","id":27768125423767,"position":1,"preview_image":{"aspect_ratio":1.294,"height":773,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07WVVZTKT.jpg?v=1651223634"},"aspect_ratio":1.294,"height":773,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07WVVZTKT.jpg?v=1651223634","width":1000},{"alt":"Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR - NewNest Australia","id":21252107436183,"position":2,"preview_image":{"aspect_ratio":1.068,"height":936,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/513aJwAAcXL.jpg?v=1622434286"},"aspect_ratio":1.068,"height":936,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/513aJwAAcXL.jpg?v=1622434286","width":1000},{"alt":"Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR - NewNest Australia","id":21252107468951,"position":3,"preview_image":{"aspect_ratio":1.067,"height":937,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/51rPZ2RtzzL.jpg?v=1622434286"},"aspect_ratio":1.067,"height":937,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/51rPZ2RtzzL.jpg?v=1622434286","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eLathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR Specifications: Material:\nmetal. Length: 100mm\/125mm. Insert Color: Golden. Accept Insert: 11ER AG60\/\n11IR AG60 Notes: Due to the light and screen setting difference, the item's\ncolor may be slightly different from the pictures. Please allow slight\ndimension difference due to different manual measurement. Color of Wrench and\npakage box is delivered by random ,if you buy more than one,you may receive\nthe same color or multiple colors. Package include: 1 x SER1010H11 External\nTurning Holder 1 x SNR0010K11 Boring Bar 2 x T8 wrench. 5 x 11 ER AG60\nThreading Insert. 5 x 11 IR AG60 Threading Inserts.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e1Package: 1pc SER1010H11 Lathe Threading Tool, 1pc SNR0010K11 Boring Bar, 5Pcs 11ER AG60 Threading Inserts, and 5Pcs 11IR AG60 Carbide Inserts, 2pcs T8 wrench\u003c\/li\u003e\n \u003cli\u003e2The parts have good rigidity, long service life and lower the cost of tools.\u003c\/li\u003e\n \u003cli\u003e3Features high grip strength, impact resistance, fast cutting and processing\u003c\/li\u003e\n \u003cli\u003e4It is convenient for the user to clamp and replace, and only a wrench is needed to complete the replacement of the blade and blade pad.\u003c\/li\u003e\n \u003cli\u003e5Practical and diverse processing environment, even in very dirty environment such as cast iron, also has very good characteristics.\u003c\/li\u003e\n \u003c\/ul\u003e"}
Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR
$237.00 AUD
Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool Size:SER1010H11+SNR0010K11+5pcs 11ER+5pcs 11IR Specifications: Material: metal. Length: 100mm/125mm. Insert Color: Golden. Accept Insert: 11ER AG60/ 11IR AG60 Notes: Due to the light and screen setting difference, the item's c...
PSI Woodworking L5818 Lathe Head...
$155.00 AUD
{"id":6688939770007,"title":"PSI Woodworking L5818 Lathe Headstock Spindle Adapter 5\/8\" Shopsmith to 1\" x 8tpi Shopsmith 5\/8\" to 1\" x 8tpi","handle":"psi-woodworking-l5818-lathe-headstock-spindle-adapter-5-8-shopsmith-to-1-x-8tpi-shopsmith-5-8-to-1-x-8tpi","description":"\u003ch3\u003ePSI Woodworking L5818 Lathe Headstock Spindle Adapter 5\/8\" Shopsmith to 1\" x 8tpi\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:Shopsmith 5\/8\" to 1\" x 8tpi Converts your Shop Smith lathe spindle so\nthat you can use chucks with a 1\" x 8 tpi thread size. Adapts to your 5\/8-inch\nno thread spindle to accomodate any 1\" x 8 tpi female mount accessory. Made of\nsteel, and has set screw to tighten to the flat on the spindle. Extends the\nspindle length over 1-inch.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eConvert a Shopsmith 5\/8\" non-threaded lathe headstock spindle to 1\" x 8tpi threaded\u003c\/li\u003e\n \u003cli\u003eAllows a 5\/8\" non-threaded spindle to accept 1\" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories\u003c\/li\u003e\n \u003cli\u003eMade of steel; Weighs .65 pounds; Extends spindle length approximately 1-1\/4\"\u003c\/li\u003e\n \u003cli\u003eIncludes set screw to lock the adapter to the spindle\u003c\/li\u003e\n \u003cli\u003eFlats allow for solid wrench tool grip for tightening and loosening from spindle; Wrench not included\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:29:01+10:00","created_at":"2021-04-05T19:29:01+10:00","vendor":"PSI Woodworking","type":"Accessories","tags":["nn05"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717859524759,"title":"Shopsmith 5\/8\" to 1\" x 8tpi","option1":"Shopsmith 5\/8\" to 1\" x 8tpi","option2":null,"option3":null,"sku":"B000KIEC88","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PSI Woodworking L5818 Lathe Headstock Spindle Adapter 5\/8\" Shopsmith to 1\" x 8tpi Shopsmith 5\/8\" to 1\" x 8tpi - Shopsmith 5\/8\" to 1\" x 8tpi","public_title":"Shopsmith 5\/8\" to 1\" x 8tpi","options":["Shopsmith 5\/8\" to 1\" x 8tpi"],"price":15500,"weight":567,"compare_at_price":null,"inventory_management":null,"barcode":"689076537698","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B000KIEC88.jpg?v=1651223496"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KIEC88.jpg?v=1651223496","options":["Size"],"media":[{"alt":"PSI Woodworking L5818 Lathe Headstock Spindle Adapter 5\/8\" Shopsmith to 1\" x 8tpi Shopsmith 5\/8\" to 1\" x 8tpi - NewNest Australia","id":27768111923351,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KIEC88.jpg?v=1651223496"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B000KIEC88.jpg?v=1651223496","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePSI Woodworking L5818 Lathe Headstock Spindle Adapter 5\/8\" Shopsmith to 1\" x 8tpi\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:Shopsmith 5\/8\" to 1\" x 8tpi Converts your Shop Smith lathe spindle so\nthat you can use chucks with a 1\" x 8 tpi thread size. Adapts to your 5\/8-inch\nno thread spindle to accomodate any 1\" x 8 tpi female mount accessory. Made of\nsteel, and has set screw to tighten to the flat on the spindle. Extends the\nspindle length over 1-inch.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eConvert a Shopsmith 5\/8\" non-threaded lathe headstock spindle to 1\" x 8tpi threaded\u003c\/li\u003e\n \u003cli\u003eAllows a 5\/8\" non-threaded spindle to accept 1\" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories\u003c\/li\u003e\n \u003cli\u003eMade of steel; Weighs .65 pounds; Extends spindle length approximately 1-1\/4\"\u003c\/li\u003e\n \u003cli\u003eIncludes set screw to lock the adapter to the spindle\u003c\/li\u003e\n \u003cli\u003eFlats allow for solid wrench tool grip for tightening and loosening from spindle; Wrench not included\u003c\/li\u003e\n \u003c\/ul\u003e"}
PSI Woodworking L5818 Lathe Headstock Spindle Adapter 5/8" Shopsmith to 1" x 8tpi Shopsmith 5/8" to 1" x 8tpi
$155.00 AUD
PSI Woodworking L5818 Lathe Headstock Spindle Adapter 5/8" Shopsmith to 1" x 8tpi Size:Shopsmith 5/8" to 1" x 8tpi Converts your Shop Smith lathe spindle so that you can use chucks with a 1" x 8 tpi thread size. Adapts to your 5/8-inch no thread spindle to accomodate any 1" x 8 tpi female mount accessory. Made of steel, and has set screw to tigh...
Stone Tools ST-12 The Original P...
$120.00 AUD
{"id":6685558145175,"title":"Stone Tools ST-12 The Original Professional Master Chuck Key 1","handle":"stone-tools-st-12-the-original-professional-master-chuck-key-1","description":"\u003ch3\u003eStone Tools ST-12 The Original Professional Master Chuck Key\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 The Stone Tools professional grade\n4 way chuck key with black oxide finish is an ideal accessory for securing\ndrill bits onto drill presses. This key is made of high quality steel with\nblack oxide for increased wear resistance. Most importantly, the chuck key is\ncompatible with many chucks such as Jacobs branded drill chucks. From the\nManufacturer The Stone Tools Model Number ST-12 Master Chuck I, the original\nprofessional master chuck key, opens heavy duty 3\/8-Inch to 3\/4-Inch chucks.\nMade from heat treated alloy steel with a black oxide finish, it will open\nover 86 different chucks. Squared center of the key will open acetylene tanks.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe Stone Tools 4 way chuck key is the ideal tool for unlocking and locking of various, popular drill chucks to keep drill bits in place\u003c\/li\u003e\n \u003cli\u003eEach key is made of heat-treated steel with a black oxide finish for an optimal combination of durability and hardness\u003c\/li\u003e\n \u003cli\u003eCenter square feature is ideal for opening acetylene tanks\u003c\/li\u003e\n \u003cli\u003eIncludes 4 pilot hole sizes: 3\/8\" with 12 teeth; 1\/4\" with 10 teeth; 5\/16\" with 11 teeth; 1\/4\" with 11 teeth\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:05:04+10:00","created_at":"2021-04-04T17:05:04+10:00","vendor":"Stone Tools","type":"Accessories","tags":["nn05"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709555228823,"title":"1","option1":"1","option2":null,"option3":null,"sku":"B0000AX9Q8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Stone Tools ST-12 The Original Professional Master Chuck Key 1 - 1","public_title":"1","options":["1"],"price":12000,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":"021112062854","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B0000AX9Q8.jpg?v=1651217892"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000AX9Q8.jpg?v=1651217892","options":["Item Package Quantity"],"media":[{"alt":"Stone Tools ST-12 The Original Professional Master Chuck Key 1 - NewNest Australia","id":27766912614551,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000AX9Q8.jpg?v=1651217892"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B0000AX9Q8.jpg?v=1651217892","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eStone Tools ST-12 The Original Professional Master Chuck Key\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 The Stone Tools professional grade\n4 way chuck key with black oxide finish is an ideal accessory for securing\ndrill bits onto drill presses. This key is made of high quality steel with\nblack oxide for increased wear resistance. Most importantly, the chuck key is\ncompatible with many chucks such as Jacobs branded drill chucks. From the\nManufacturer The Stone Tools Model Number ST-12 Master Chuck I, the original\nprofessional master chuck key, opens heavy duty 3\/8-Inch to 3\/4-Inch chucks.\nMade from heat treated alloy steel with a black oxide finish, it will open\nover 86 different chucks. Squared center of the key will open acetylene tanks.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe Stone Tools 4 way chuck key is the ideal tool for unlocking and locking of various, popular drill chucks to keep drill bits in place\u003c\/li\u003e\n \u003cli\u003eEach key is made of heat-treated steel with a black oxide finish for an optimal combination of durability and hardness\u003c\/li\u003e\n \u003cli\u003eCenter square feature is ideal for opening acetylene tanks\u003c\/li\u003e\n \u003cli\u003eIncludes 4 pilot hole sizes: 3\/8\" with 12 teeth; 1\/4\" with 10 teeth; 5\/16\" with 11 teeth; 1\/4\" with 11 teeth\u003c\/li\u003e\n \u003c\/ul\u003e"}
Stone Tools ST-12 The Original Professional Master Chuck Key 1
$120.00 AUD
Stone Tools ST-12 The Original Professional Master Chuck Key Item Package Quantity:1 The Stone Tools professional grade 4 way chuck key with black oxide finish is an ideal accessory for securing drill bits onto drill presses. This key is made of high quality steel with black oxide for increased wear resistance. Most importantly, the chuck key i...
