Flutesan 3 Pieces Dusk to Dawn Sensor for Outdoor Lighting 100-277v Photocell Sensor Photo Eye Sensor Photoelectric Switch Hardwired Post Eye Light Control Most Outdoor Lamp Fixtures Bulbs
Flutesan 3 Pieces Dusk to Dawn Sensor for Outdoor Lighting 100-277v Photocell Sensor Photo Eye Sensor Photoelectric Switch Hardwired Post Eye Light Control Most Outdoor Lamp Fixtures Bulbs
Features: Quality housing: Waterproof and corrosion resistant, photo electric sensor features long lasting and reliable quality assurance, ensure lighting time. Sufficient to use: You will get 3 pieces dusk to dawn eye sensors in black color, adequate and sufficient for daily using. Each measures about about 52.5 x 29 x 42 mm/ 2.1 x 1.1 x 1.7 inch, suitable size for easy installation. Also you can recommend them to people in need. Specifications: Size: about 52.5 x 29 x 42 mm/ 2.1 x 1.1 x 1.7 inch Sensor head length and diameter: about 0.8 x 0.6 inch/ 20 x 15 mm Main color: black Weight: 55 g Input voltage: 100-277 VAC Package includes: 3 x Photoelectric switches Warm notes: Remember that LEDs operate on DC power, other voltages are not suitable. Please allow a little error on the size due to manual measurement. The color might exist slight difference due to different displays. Please read the size instruction carefully before purchasing.
Product Features
- Note: the wiring must be correct; In addition, the place where the switch is installed should not be directly illuminated by the controlled light; it should not be installed at night, in a place with strong light or in a place with relatively dark light during the day; it should be able to feel natural light.
- Intelligent detection design: this light sensor photocell turns on your exterior lights at dusk and dawn, automatically control lighting according to ambient lighting levels; The internal design has an automatic ambient light level detection circuit that automatically switches off during the day and on at night
- Waterproof to withstand bad weather: equipped with a waterproof cap, photo eye sensor for outdoor lights is designed to double protect the sensor lens, assists the conversion to work better in harsh environments, like rainy, windy, snow day and so on
- Multiple compatibility: light switch daylight sensor's rated voltage is 110-220V, but the actual operating voltage range is 100-277VAC, can be compatible with most lamps, such as incandescent, fluorescent and LED; Remember that LEDs operate on DC power, other voltages are not suitable
- Easy to Install: the photo control can work with most fixtures and bulbs for hardwire outdoor lamp posts, which are required a mounting hole less than 0.6 inches in diameter; Disconnect power, remove junction box cover, place the photocell light switch in knockout hole and fasten with lock nut
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.