Shop with Confidence — Free Shipping on All Orders

{"id":8876837109911,"title":"Halo H99RTAT, 4\" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage Each","handle":"halo-h99rtat-4-housing-non-ic-air-tite-shallow-ceiling-remodel-120v-line-voltage-each","description":"\u003ch3\u003eHalo H99RTAT, 4\" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAir-tite fixture sealed and gasketed to prevent airflow\nbetween attic space and living areas. Can be installed from below the ceiling.\nFor providing accent and task lighting where insulation can be kept 3\" from\nhousing. Thermal protector deactivates fixture if overheating occurs due to\nimproper lamping or misapplied insulation. Junction box is listed for through\nbranch circuit wiring and has seven 1\/2\" knockouts and four pryouts with\nintegral strain relief for non-metallic sheathed cable. Four remodel clips\nsecure housing and accommodate ceiling thickness of 1\/2\" and 5\/8\". UL\/cUL\nListed 1598 Luminaire. UL\/cUL Damp Location Listed. UL\/cUL Listed for Wet\nLocation, covered ceiling - with select trims. Certified Under ASTM-E283 for\nair tight construction. Halo's recessed lighting fixtures are\ndesigned for ease of installation and flexibility across a variety of\nmaterials and situations. The hanger bars include pre-installed nails (self-\ntapping screws are also available) in special housings that ensure smooth,\nstraight penetration, whether you're working with laminated composites,\nengineered I-joists, open-web joist plates, or even frozen lumber. The\nautomatic leveling flanges allow you to hold the housing securely in place\nwith one hand while driving nails with the other. The hangers of the H99T fit\nonto the T-bar spline of a suspended ceiling system, and may be permanently\nsecured with optional TB7 T-bar clips. Halo also makes it easy to work in\nconfined spaces. To install in joist spans of less than 12 inches, simply\ncollapse the hanger bars then bend and break them along the score lines--no\ntools needed. The bars can also be removed and repositioned on the opposite\nside of the frame if you need to mount the unit at 90 degrees to the original\nconfiguration. Wiring is a breeze with Halo's patented Slide-N-Side wiring\nsystem, which allows wiring outside the junction box. The H99T, with its\nsmall, four-inch aperture, is the perfect solution for discreet accent or task\nlighting, and is available with a variety of trim styles (sold separately).\nNote that, while this is not an IC-rated fixture, insulation may be placed\naround it as long as a three-inch space is maintained around the housing. UL\ndamp location and feed-through rated; CSA certified; IP rated. (Looking for a\nsimilar lamp for a remodel project? See Halo's H99RT.)--Josh Dettweiler\n Halo's recessed lighting fixtures are designed for ease of\ninstallation and flexibility across a variety of materials and situations. The\nhanger bars include pre-installed nails (self-tapping screws are also\navailable) in special housings that ensure smooth, straight penetration,\nwhether you're working with laminated composites, engineered I-joists, open-\nweb joist plates, or even frozen lumber. The automatic leveling flanges allow\nyou to hold the housing securely in place with one hand while driving nails\nwith the other. The hangers of the H99T fit onto the T-bar spline of a\nsuspended ceiling system, and may be permanently secured with optional TB7\nT-bar clips.Halo also makes it easy to work in confined spaces. To install in\njoist spans of less than 12 inches, simply collapse the hanger bars then bend\nand break them along the score lines--no tools needed. The bars can also be\nremoved and repositioned on the opposite side of the frame if you need to\nmount the unit at 90 degrees to the original configuration. Wiring is a breeze\nwith Halo's patented Slide-N-Side wiring system, which allows wiring outside\nthe junction box.The H99T, with its small, four-inch aperture, is the perfect\nsolution for discreet accent or task lighting, and is available with a variety\nof trim styles (sold separately). Note that, while this is not an IC-rated\nfixture, insulation may be placed around it as long as a three-inch space is\nmaintained around the housing. UL damp location and feed-through rated; CSA\ncertified; IP rated. (Looking for a similar lamp for a remodel project? See\nHalo's H99RT.)--Josh DettweilerWhat's in the Box Four-inch-aperture housing\nP.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer 4\" Remodel Non IC Airtite Shallow Ceiling Housing See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRemodel can, for recessed lighting with limited ceiling access\u003c\/li\u003e\n \u003cli\u003eCompatible with a variety of 4\" trims including shower lights\u003c\/li\u003e\n \u003cli\u003eSimple installation when adding to existing ceilings\u003c\/li\u003e\n \u003cli\u003eQuick connect wiring connectors included in junction box\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2025-03-09T13:25:56+11:00","created_at":"2025-03-05T00:55:32+11:00","vendor":"HALO","type":"Housings","tags":["home_improvement_Feb2025"],"price":16400,"price_min":16400,"price_max":16400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45263678570647,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0009J2730","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Halo H99RTAT, 4\" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage Each","public_title":null,"options":["Default Title"],"price":16400,"weight":681,"compare_at_price":null,"inventory_management":"shopify","barcode":"80083584369","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/newnestshop.com\/cdn\/shop\/files\/B0009J2730.jpg?v=1775791116","\/\/newnestshop.com\/cdn\/shop\/files\/51YGCyJBTaL.jpg?v=1741096534","\/\/newnestshop.com\/cdn\/shop\/files\/51EgoBeNjgL.jpg?v=1741096535"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/files\/B0009J2730.jpg?v=1775791116","options":["Title"],"media":[{"alt":null,"id":37206193012887,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/files\/B0009J2730.jpg?v=1775791116"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/files\/B0009J2730.jpg?v=1775791116","width":1000},{"alt":null,"id":37206193078423,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/files\/51YGCyJBTaL.jpg?v=1741096534"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/files\/51YGCyJBTaL.jpg?v=1741096534","width":1000},{"alt":null,"id":37206193111191,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/newnestshop.com\/cdn\/shop\/files\/51EgoBeNjgL.jpg?v=1741096535"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/files\/51EgoBeNjgL.jpg?v=1741096535","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eHalo H99RTAT, 4\" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAir-tite fixture sealed and gasketed to prevent airflow\nbetween attic space and living areas. Can be installed from below the ceiling.\nFor providing accent and task lighting where insulation can be kept 3\" from\nhousing. Thermal protector deactivates fixture if overheating occurs due to\nimproper lamping or misapplied insulation. Junction box is listed for through\nbranch circuit wiring and has seven 1\/2\" knockouts and four pryouts with\nintegral strain relief for non-metallic sheathed cable. Four remodel clips\nsecure housing and accommodate ceiling thickness of 1\/2\" and 5\/8\". UL\/cUL\nListed 1598 Luminaire. UL\/cUL Damp Location Listed. UL\/cUL Listed for Wet\nLocation, covered ceiling - with select trims. Certified Under ASTM-E283 for\nair tight construction. Halo's recessed lighting fixtures are\ndesigned for ease of installation and flexibility across a variety of\nmaterials and situations. The hanger bars include pre-installed nails (self-\ntapping screws are also available) in special housings that ensure smooth,\nstraight penetration, whether you're working with laminated composites,\nengineered I-joists, open-web joist plates, or even frozen lumber. The\nautomatic leveling flanges allow you to hold the housing securely in place\nwith one hand while driving nails with the other. The hangers of the H99T fit\nonto the T-bar spline of a suspended ceiling system, and may be permanently\nsecured with optional TB7 T-bar clips. Halo also makes it easy to work in\nconfined spaces. To install in joist spans of less than 12 inches, simply\ncollapse the hanger bars then bend and break them along the score lines--no\ntools needed. The bars can also be removed and repositioned on the opposite\nside of the frame if you need to mount the unit at 90 degrees to the original\nconfiguration. Wiring is a breeze with Halo's patented Slide-N-Side wiring\nsystem, which allows wiring outside the junction box. The H99T, with its\nsmall, four-inch aperture, is the perfect solution for discreet accent or task\nlighting, and is available with a variety of trim styles (sold separately).\nNote that, while this is not an IC-rated fixture, insulation may be placed\naround it as long as a three-inch space is maintained around the housing. UL\ndamp location and feed-through rated; CSA certified; IP rated. (Looking for a\nsimilar lamp for a remodel project? See Halo's H99RT.)--Josh Dettweiler\n Halo's recessed lighting fixtures are designed for ease of\ninstallation and flexibility across a variety of materials and situations. The\nhanger bars include pre-installed nails (self-tapping screws are also\navailable) in special housings that ensure smooth, straight penetration,\nwhether you're working with laminated composites, engineered I-joists, open-\nweb joist plates, or even frozen lumber. The automatic leveling flanges allow\nyou to hold the housing securely in place with one hand while driving nails\nwith the other. The hangers of the H99T fit onto the T-bar spline of a\nsuspended ceiling system, and may be permanently secured with optional TB7\nT-bar clips.Halo also makes it easy to work in confined spaces. To install in\njoist spans of less than 12 inches, simply collapse the hanger bars then bend\nand break them along the score lines--no tools needed. The bars can also be\nremoved and repositioned on the opposite side of the frame if you need to\nmount the unit at 90 degrees to the original configuration. Wiring is a breeze\nwith Halo's patented Slide-N-Side wiring system, which allows wiring outside\nthe junction box.The H99T, with its small, four-inch aperture, is the perfect\nsolution for discreet accent or task lighting, and is available with a variety\nof trim styles (sold separately). Note that, while this is not an IC-rated\nfixture, insulation may be placed around it as long as a three-inch space is\nmaintained around the housing. UL damp location and feed-through rated; CSA\ncertified; IP rated. (Looking for a similar lamp for a remodel project? See\nHalo's H99RT.)--Josh DettweilerWhat's in the Box Four-inch-aperture housing\nP.when('A').execute(function(A) {\nA.on('a:expander:toggle_description:toggle:collapse', function(data) {\nwindow.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the\nManufacturer 4\" Remodel Non IC Airtite Shallow Ceiling Housing See more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRemodel can, for recessed lighting with limited ceiling access\u003c\/li\u003e\n \u003cli\u003eCompatible with a variety of 4\" trims including shower lights\u003c\/li\u003e\n \u003cli\u003eSimple installation when adding to existing ceilings\u003c\/li\u003e\n \u003cli\u003eQuick connect wiring connectors included in junction box\u003c\/li\u003e\n \u003c\/ul\u003e"}
  1. Home

Halo H99RTAT, 4" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage Each

In Stock. Leaves warehouse within 2 - 3 business days

$164.00 AUD
Maximum quantity available reached.
Shop with Confidence — Free Shipping, Always
More detailed product descriptions
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Halo H99RTAT, 4" Housing Non-IC, Air-Tite Shallow Ceiling Remodel 120V Line Voltage

Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. Can be installed from below the ceiling. For providing accent and task lighting where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four pryouts with integral strain relief for non-metallic sheathed cable. Four remodel clips secure housing and accommodate ceiling thickness of 1/2" and 5/8". UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location Listed. UL/cUL Listed for Wet Location, covered ceiling - with select trims. Certified Under ASTM-E283 for air tight construction. Halo's recessed lighting fixtures are designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self- tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open-web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The hangers of the H99T fit onto the T-bar spline of a suspended ceiling system, and may be permanently secured with optional TB7 T-bar clips. Halo also makes it easy to work in confined spaces. To install in joist spans of less than 12 inches, simply collapse the hanger bars then bend and break them along the score lines--no tools needed. The bars can also be removed and repositioned on the opposite side of the frame if you need to mount the unit at 90 degrees to the original configuration. Wiring is a breeze with Halo's patented Slide-N-Side wiring system, which allows wiring outside the junction box. The H99T, with its small, four-inch aperture, is the perfect solution for discreet accent or task lighting, and is available with a variety of trim styles (sold separately). Note that, while this is not an IC-rated fixture, insulation may be placed around it as long as a three-inch space is maintained around the housing. UL damp location and feed-through rated; CSA certified; IP rated. (Looking for a similar lamp for a remodel project? See Halo's H99RT.)--Josh Dettweiler Halo's recessed lighting fixtures are designed for ease of installation and flexibility across a variety of materials and situations. The hanger bars include pre-installed nails (self-tapping screws are also available) in special housings that ensure smooth, straight penetration, whether you're working with laminated composites, engineered I-joists, open- web joist plates, or even frozen lumber. The automatic leveling flanges allow you to hold the housing securely in place with one hand while driving nails with the other. The hangers of the H99T fit onto the T-bar spline of a suspended ceiling system, and may be permanently secured with optional TB7 T-bar clips.Halo also makes it easy to work in confined spaces. To install in joist spans of less than 12 inches, simply collapse the hanger bars then bend and break them along the score lines--no tools needed. The bars can also be removed and repositioned on the opposite side of the frame if you need to mount the unit at 90 degrees to the original configuration. Wiring is a breeze with Halo's patented Slide-N-Side wiring system, which allows wiring outside the junction box.The H99T, with its small, four-inch aperture, is the perfect solution for discreet accent or task lighting, and is available with a variety of trim styles (sold separately). Note that, while this is not an IC-rated fixture, insulation may be placed around it as long as a three-inch space is maintained around the housing. UL damp location and feed-through rated; CSA certified; IP rated. (Looking for a similar lamp for a remodel project? See Halo's H99RT.)--Josh DettweilerWhat's in the Box Four-inch-aperture housing P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer 4" Remodel Non IC Airtite Shallow Ceiling Housing See more

Product Features

  • Remodel can, for recessed lighting with limited ceiling access
  • Compatible with a variety of 4" trims including shower lights
  • Simple installation when adding to existing ceilings
  • Quick connect wiring connectors included in junction box

Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).

This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.

You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.