MidTen 7.62x39mm Bore Sight Red Dot Boresighters with Three Batteries
MidTen 7.62x39mm Bore Sight Red Dot Boresighters with Three Batteries
Specification -- Length: 38.5mm; Tail width: 11mm; Head width: 8.2mm -- Laser Wave length (nm:) 640 to 660 -- LED Type: visible red laser -- Power: <5 mW -- Construction: Brass -- Sighting Range: 15 to 100 yards -- Operation: On/Off End Cap -- Temperature: -10℃ to 40℃ -- Battery Type:3 X AG3 (Included) How to use the bore sight? 1.Unscrew the back cap from the bore sight by turning counter clockwise 2.Stand the bore sight on a flat surface with the laser side pointing down 3.Insert batteries (+ side up) inside the rear opening 4.Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on) 5.Place in your rifle’s chamber and close the bolt 6.To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle’s barrel upward (always practicing safe firearm practices) 7.Unscrew the back and remove the batteries to turn the unit off Package included -- 1 X Bore Sight -- 3 X AG3 Battery
Product Information
- Class IIIA laser, less than 5mW
- Made to fit the 7.62x39mm chamber, caliber specific.
- Comes with 1 set batteries (3 AG3/LR41 batteries) which can last one and half an hour.
- Easy to sit perfectly in the bore. Sturdy brass construction. Fast gun zeroing and sighting.
- High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards.
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.