SCD41 Gas Sensor Module 2.4-5.5V, 2 in 1 Gas Sensor Module Detects CO2 Carbon Dioxide, Temperature and Humidity I2C Communication for Air Quality Monitoring IR 8x8 Infrared Cameras Thermal Imager
SCD41 Gas Sensor Module 2.4-5.5V, 2 in 1 Gas Sensor Module Detects CO2 Carbon Dioxide, Temperature and Humidity I2C Communication for Air Quality Monitoring
Product Features
- SCD41 Gas Sensor Module- This product has high precision and high cost performance. The module uses a 2.54mm pitch pin header interface to lead out the power supply and communication pins. On-chip temperature and humidity compensation is achieved through the built-in temperature and humidity sensor to measure humidity and temperature
- Adjust indoor ventilation systems- SCD41 Gas Sensor Module can intelligently adjust indoor ventilation systems based on CO2 concentrations. Indoor air quality helps maintain a healthy and efficient environment at low CO2 concentrations over a period of time
- Product Parameters- Benchmark accuracy, specified range: SD41: 400-5000PPM, supply voltage range: 2.4-5.5V, high accuracy: (40ppm + 5%), low power operation to 0.4mA, average value @5V, 1meas./5 minutes
- Note- Please read the documentation first. By default it re-calibrates weekly, taking the lowest measurement as the reference. Depending on your environment, that may seldom go below 500-600ppm (or more)
- Pin Definition- GND: negative power input port. VDD: positive power input port. SCL:12C clock port. SDA:12C data port
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the CocoonPower Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.