Taytools

{"id":6843738325143,"title":"10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing","handle":"10-piece-set-lapping-microfinishing-polishing-film-0-05-micron-500-000-grit-to-60-micron-250-grit-8-5-inches-x-11-inches-non-pressure-sensitive-adhesive-3-mil-backing","description":"\u003ch3\u003e10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese precision microfinishing lapping sheets were developed for the\nelectronics industry but can be used to flat lap or polish just about\nanything. This lapping film contains carefully graded aluminum oxide particles\nthat are electrostatically coated onto a high-strength, tear-resistant\npolyester film backing. This fast cutting, water resistant abrasive provides a\nprecise, consistent, close tolerance cut rate throughout the life of the\nproduct. Sheets are available in a wide range of precise micron grades to meet\nany sharpening or polishing need. They can be used to put a wicked sharp edge\non wood chisels, plane irons, carving tools or knives. Can also be used to put\na fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure\nSensitive Adhesive) backed. They have a 3 mil high-strength polyester film\nbacking is waterproof and less likely to tear than traditional wet or dry\nsandpaper. They are available in the following grades\/grits: 0.05 micron (off-\nwhite) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light\ngreen) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500\ngrit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30\nmicron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or\n250 grit. These sheets are not marked so using the above grit\/color key will\nbe the only accurate way to identify. Kit comes instruction and grit\/color\nkey.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e10 Piece Set Lapping Microfinishing Polishing Film with the following grades: : 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit.\u003c\/li\u003e\n \u003cli\u003e8.5 inches x 11 inches Non-PSA (Pressure Sensitive Adhesive) backing\u003c\/li\u003e\n \u003cli\u003e3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper\u003c\/li\u003e\n \u003cli\u003eAluminum Oxide (AO) abrasive material self-fractures in use to expose fresh cutting edges\u003c\/li\u003e\n \u003cli\u003eAvailable in a wide range of precise micron grades from 0.05 micron (500,000 grit) to 60 micron (250 grit) to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-05-09T20:03:46+10:00","created_at":"2021-05-09T20:03:46+10:00","vendor":"Taytools","type":"PSA Discs","tags":["nn06"],"price":15200,"price_min":15200,"price_max":15200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40055576494231,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B074DK653S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing","public_title":null,"options":["Default Title"],"price":15200,"weight":96,"compare_at_price":null,"inventory_management":null,"barcode":"700667472010","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B074DK653S.jpg?v=1651278311"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B074DK653S.jpg?v=1651278311","options":["Title"],"media":[{"alt":"10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing - NewNest Australia","id":27776558170263,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1200,"width":1800,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B074DK653S.jpg?v=1651278311"},"aspect_ratio":1.5,"height":1200,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B074DK653S.jpg?v=1651278311","width":1800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron (500,000 Grit) to 60 Micron (250 Grit) 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese precision microfinishing lapping sheets were developed for the\nelectronics industry but can be used to flat lap or polish just about\nanything. This lapping film contains carefully graded aluminum oxide particles\nthat are electrostatically coated onto a high-strength, tear-resistant\npolyester film backing. This fast cutting, water resistant abrasive provides a\nprecise, consistent, close tolerance cut rate throughout the life of the\nproduct. Sheets are available in a wide range of precise micron grades to meet\nany sharpening or polishing need. They can be used to put a wicked sharp edge\non wood chisels, plane irons, carving tools or knives. Can also be used to put\na fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure\nSensitive Adhesive) backed. They have a 3 mil high-strength polyester film\nbacking is waterproof and less likely to tear than traditional wet or dry\nsandpaper. They are available in the following grades\/grits: 0.05 micron (off-\nwhite) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light\ngreen) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500\ngrit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30\nmicron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or\n250 grit. These sheets are not marked so using the above grit\/color key will\nbe the only accurate way to identify. Kit comes instruction and grit\/color\nkey.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e10 Piece Set Lapping Microfinishing Polishing Film with the following grades: : 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit.\u003c\/li\u003e\n \u003cli\u003e8.5 inches x 11 inches Non-PSA (Pressure Sensitive Adhesive) backing\u003c\/li\u003e\n \u003cli\u003e3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper\u003c\/li\u003e\n \u003cli\u003eAluminum Oxide (AO) abrasive material self-fractures in use to expose fresh cutting edges\u003c\/li\u003e\n \u003cli\u003eAvailable in a wide range of precise micron grades from 0.05 micron (500,000 grit) to 60 micron (250 grit) to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6688960413847,"title":"18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18","handle":"18-anodized-aluminum-straight-edge-guaranteed-straight-to-within-001-over-full-18-length-se18","description":"\u003ch3\u003e18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis aluminum straight edge is an economical alternative to other much more\nexpensive straight edges on the market. This straight edge is very helpful to\ndetermine machine table flatness and in setting up machines such as jointers\nand planers and various out feed tables. Reference edge is machined flat to\nwithin 0.001\" over the entire length. They are available in four different\nlengths.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eGuaranteed straight to within 0.001 over the entire 18 length\u003c\/li\u003e\n \u003cli\u003eAnodized aluminum .0400 (7\/16) thick by 1.750 (1 34) wide\u003c\/li\u003e\n \u003cli\u003eReference edge is machined flat and smooth\u003c\/li\u003e\n \u003cli\u003eContoured cross section for easy gripping\u003c\/li\u003e\n \u003cli\u003eHanging hole on one end\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:37:55+10:00","created_at":"2021-04-05T19:37:55+10:00","vendor":"Taytools","type":"Jig Accessories","tags":["nn05"],"price":17400,"price_min":17400,"price_max":17400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717922930839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01DQCBHJ6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18","public_title":null,"options":["Default Title"],"price":17400,"weight":558,"compare_at_price":null,"inventory_management":null,"barcode":"791617730250","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B01DQCBHJ6.jpg?v=1651223980","\/\/newnestshop.com\/cdn\/shop\/products\/81I2E_2BP2brL.jpg?v=1622434625"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B01DQCBHJ6.jpg?v=1651223980","options":["Title"],"media":[{"alt":"18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18 - NewNest Australia","id":27768170217623,"position":1,"preview_image":{"aspect_ratio":1.521,"height":1683,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01DQCBHJ6.jpg?v=1651223980"},"aspect_ratio":1.521,"height":1683,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01DQCBHJ6.jpg?v=1651223980","width":2560},{"alt":"18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18 - NewNest Australia","id":21252162355351,"position":2,"preview_image":{"aspect_ratio":1.346,"height":1902,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81I2E_2BP2brL.jpg?v=1622434625"},"aspect_ratio":1.346,"height":1902,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81I2E_2BP2brL.jpg?v=1622434625","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e18\" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001\" Over Full 18\" Length SE18\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis aluminum straight edge is an economical alternative to other much more\nexpensive straight edges on the market. This straight edge is very helpful to\ndetermine machine table flatness and in setting up machines such as jointers\nand planers and various out feed tables. Reference edge is machined flat to\nwithin 0.001\" over the entire length. They are available in four different\nlengths.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eGuaranteed straight to within 0.001 over the entire 18 length\u003c\/li\u003e\n \u003cli\u003eAnodized aluminum .0400 (7\/16) thick by 1.750 (1 34) wide\u003c\/li\u003e\n \u003cli\u003eReference edge is machined flat and smooth\u003c\/li\u003e\n \u003cli\u003eContoured cross section for easy gripping\u003c\/li\u003e\n \u003cli\u003eHanging hole on one end\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6688898252951,"title":"2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449","handle":"2-1-2-inch-abs-plastic-blast-gate-2-1-2-inch-od-openings-on-both-sides-for-dust-collection-systems-73449","description":"\u003ch3\u003e2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBlast gates are used to open and close branch ducts to divert airflow only to\nthose machines in operation. This conserves air volume and keeps suction\nstrongest where dust is being produced, thus maximizing dust extraction. These\nABS plastic blast gates are very economically priced to allow you to outfit\nyour dust collection system for maximum performance. These fittings are\nabrasion resistant and are designed to withstand the abrasive nature of wood\nchips and saw dust. Due to the potential for built up of static electricity,\nit is recommended that all dust collection systems with plastic fittings be\nproperly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBoth openings are 2.460\" OD and taper to 2.500\" OD\u003c\/li\u003e\n \u003cli\u003eWill allow attachment to 2.5\" flexible hose or tapered dust fittings\u003c\/li\u003e\n \u003cli\u003eMade from strong 1\/8\" thick abrasion resistant ABS plastic that will withstand abrasive nature of sawdust and wood chips\u003c\/li\u003e\n \u003cli\u003eInside is smooth to allow maximum airflow\u003c\/li\u003e\n \u003cli\u003eBuilt in stop to prevent sliding plate from coming out of housing\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:14:27+10:00","created_at":"2021-04-05T19:14:27+10:00","vendor":"Taytools","type":"Vacuum \u0026 Dust Collector Parts","tags":["nn05"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717736349847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B06VXJWJZN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449","public_title":null,"options":["Default Title"],"price":12000,"weight":151,"compare_at_price":null,"inventory_management":null,"barcode":"791617734494","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B06VXJWJZN.jpg?v=1651222596","\/\/newnestshop.com\/cdn\/shop\/products\/81fMsoZLPoL.jpg?v=1622433271","\/\/newnestshop.com\/cdn\/shop\/products\/81-q5Aa88sL.jpg?v=1622433271"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VXJWJZN.jpg?v=1651222596","options":["Title"],"media":[{"alt":"2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449 - NewNest Australia","id":27768001593495,"position":1,"preview_image":{"aspect_ratio":1.553,"height":1648,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VXJWJZN.jpg?v=1651222596"},"aspect_ratio":1.553,"height":1648,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VXJWJZN.jpg?v=1651222596","width":2560},{"alt":"2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449 - NewNest Australia","id":21251941433495,"position":2,"preview_image":{"aspect_ratio":1.694,"height":1511,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81fMsoZLPoL.jpg?v=1622433271"},"aspect_ratio":1.694,"height":1511,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81fMsoZLPoL.jpg?v=1622433271","width":2560},{"alt":"2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449 - NewNest Australia","id":21251941466263,"position":3,"preview_image":{"aspect_ratio":1.63,"height":1571,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81-q5Aa88sL.jpg?v=1622433271"},"aspect_ratio":1.63,"height":1571,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81-q5Aa88sL.jpg?v=1622433271","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e2-1\/2 Inch ABS Plastic Blast Gate 2-1\/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBlast gates are used to open and close branch ducts to divert airflow only to\nthose machines in operation. This conserves air volume and keeps suction\nstrongest where dust is being produced, thus maximizing dust extraction. These\nABS plastic blast gates are very economically priced to allow you to outfit\nyour dust collection system for maximum performance. These fittings are\nabrasion resistant and are designed to withstand the abrasive nature of wood\nchips and saw dust. Due to the potential for built up of static electricity,\nit is recommended that all dust collection systems with plastic fittings be\nproperly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBoth openings are 2.460\" OD and taper to 2.500\" OD\u003c\/li\u003e\n \u003cli\u003eWill allow attachment to 2.5\" flexible hose or tapered dust fittings\u003c\/li\u003e\n \u003cli\u003eMade from strong 1\/8\" thick abrasion resistant ABS plastic that will withstand abrasive nature of sawdust and wood chips\u003c\/li\u003e\n \u003cli\u003eInside is smooth to allow maximum airflow\u003c\/li\u003e\n \u003cli\u003eBuilt in stop to prevent sliding plate from coming out of housing\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6685559292055,"title":"4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454","handle":"4-to-2-25-inch-cone-reducer-abs-plastic-with-4-inch-od-and-2-25-inch-od-openings-for-dust-collector-systems-73454","description":"\u003ch3\u003e4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese reducers allow fitting of a 4\" dust collection hose into a 2.5\" fitting\nor Shop Vacuum connector. Overall length is 6.5\". Has a flange to allow easy\nassemble\/disassemble.One end has 2.25\" OD opening and the other has 4\" OD\nopening. These ABS plastic reducers are very economically priced to allow you\nto outfit your dust collection system for maximum performance. These fittings\nare made from 1\/8\" thick ABS abrasion resistant plastic and are designed to\nwithstand the abrasive nature of wood chips and saw dust. Due to the potential\nfor built up of static electricity, it is recommended that all dust collection\nsystems with plastic fittings be properly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThese reducers allow fitting into a 2.5\" dust port to a 4\" hose\u003c\/li\u003e\n \u003cli\u003eSmaller end has 2.300\" OD and 2.130\" ID; Larger end has 3.980\" OD and 3.760\" ID\u003c\/li\u003e\n \u003cli\u003eOverall height is 6.5\"\u003c\/li\u003e\n \u003cli\u003eHas flange to allow easy assembly and disassembly\u003c\/li\u003e\n \u003cli\u003eCan be used to fit 4\" hose to a shop vacuum opening\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-04T17:05:53+10:00","created_at":"2021-04-04T17:05:53+10:00","vendor":"Taytools","type":"Vacuum \u0026 Dust Collector Parts","tags":["nn05"],"price":9500,"price_min":9500,"price_max":9500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39709562863767,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B06W2PC5XW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454","public_title":null,"options":["Default Title"],"price":9500,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"73454","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B06W2PC5XW.jpg?v=1651217947","\/\/newnestshop.com\/cdn\/shop\/products\/71uwGV6UWCL.jpg?v=1622428717"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B06W2PC5XW.jpg?v=1651217947","options":["Title"],"media":[{"alt":"4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454 - NewNest Australia","id":27766922248343,"position":1,"preview_image":{"aspect_ratio":1.495,"height":1712,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06W2PC5XW.jpg?v=1651217947"},"aspect_ratio":1.495,"height":1712,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06W2PC5XW.jpg?v=1651217947","width":2560},{"alt":"4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454 - NewNest Australia","id":21239400071319,"position":2,"preview_image":{"aspect_ratio":1.006,"height":2124,"width":2136,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71uwGV6UWCL.jpg?v=1622428717"},"aspect_ratio":1.006,"height":2124,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71uwGV6UWCL.jpg?v=1622428717","width":2136}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e4 to 2.25 Inch Cone Reducer ABS Plastic with 4 Inch OD and 2.25 Inch OD Openings for Dust Collector Systems 73454\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese reducers allow fitting of a 4\" dust collection hose into a 2.5\" fitting\nor Shop Vacuum connector. Overall length is 6.5\". Has a flange to allow easy\nassemble\/disassemble.One end has 2.25\" OD opening and the other has 4\" OD\nopening. These ABS plastic reducers are very economically priced to allow you\nto outfit your dust collection system for maximum performance. These fittings\nare made from 1\/8\" thick ABS abrasion resistant plastic and are designed to\nwithstand the abrasive nature of wood chips and saw dust. Due to the potential\nfor built up of static electricity, it is recommended that all dust collection\nsystems with plastic fittings be properly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThese reducers allow fitting into a 2.5\" dust port to a 4\" hose\u003c\/li\u003e\n \u003cli\u003eSmaller end has 2.300\" OD and 2.130\" ID; Larger end has 3.980\" OD and 3.760\" ID\u003c\/li\u003e\n \u003cli\u003eOverall height is 6.5\"\u003c\/li\u003e\n \u003cli\u003eHas flange to allow easy assembly and disassembly\u003c\/li\u003e\n \u003cli\u003eCan be used to fit 4\" hose to a shop vacuum opening\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6696640381079,"title":"5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472","handle":"5-to-4-inches-duct-reducer-abs-plastic-with-4-inch-od-and-5-ich-od-openings-dust-collector-systems-73472","description":"\u003ch3\u003e5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese reducers allow fitting of a 4\" dust collection hose to a 5\" hose.\nOverall length is 4.75\". Has a flange to allow easy assemble\/disassemble.One\nend has 4\" OD opening and the other has 5\" OD opening. These ABS plastic\nreducers are very economical priced to allow you to outfit your dust\ncollection system for maximum performance. These fittings are made from 1\/8\"\nthick ABS abrasion resistant plastic and are designed to withstand the\nabrasive nature of wood chips and saw dust. Due to the potential for built up\nof static electricity, it is recommended that all dust collection systems with\nplastic fittings be properly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThese reducers allow fitting of a 4\" dust collection hose to a 5\" hose.\u003c\/li\u003e\n \u003cli\u003eSmaller opening has 3.940\" OD and 3.700\" ID\u003c\/li\u003e\n \u003cli\u003eLarger opening has 4.900\" OD 4.700\" ID\u003c\/li\u003e\n \u003cli\u003eOverall height is 4.75\"\u003c\/li\u003e\n \u003cli\u003eHas flange to allow easy assembly and disassembly\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-07T22:31:05+10:00","created_at":"2021-04-07T22:31:05+10:00","vendor":"Taytools","type":"Vacuum \u0026 Dust Collector Parts","tags":["nn05"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39735471308951,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B06VY1R12M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472","public_title":null,"options":["Default Title"],"price":12000,"weight":159,"compare_at_price":null,"inventory_management":null,"barcode":"791617734722","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B06VY1R12M.jpg?v=1651231311","\/\/newnestshop.com\/cdn\/shop\/products\/81Fz_2BCS2A7L.jpg?v=1622441924"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VY1R12M.jpg?v=1651231311","options":["Title"],"media":[{"alt":"5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472 - NewNest Australia","id":27769596280983,"position":1,"preview_image":{"aspect_ratio":1.466,"height":1746,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VY1R12M.jpg?v=1651231311"},"aspect_ratio":1.466,"height":1746,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B06VY1R12M.jpg?v=1651231311","width":2560},{"alt":"5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472 - NewNest Australia","id":21306501038231,"position":2,"preview_image":{"aspect_ratio":1.256,"height":2039,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Fz_2BCS2A7L.jpg?v=1622441924"},"aspect_ratio":1.256,"height":2039,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81Fz_2BCS2A7L.jpg?v=1622441924","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e5 to 4 Inches Duct Reducer ABS Plastic with 4 Inch OD and 5 Ich OD Openings Dust Collector Systems 73472\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThese reducers allow fitting of a 4\" dust collection hose to a 5\" hose.\nOverall length is 4.75\". Has a flange to allow easy assemble\/disassemble.One\nend has 4\" OD opening and the other has 5\" OD opening. These ABS plastic\nreducers are very economical priced to allow you to outfit your dust\ncollection system for maximum performance. These fittings are made from 1\/8\"\nthick ABS abrasion resistant plastic and are designed to withstand the\nabrasive nature of wood chips and saw dust. Due to the potential for built up\nof static electricity, it is recommended that all dust collection systems with\nplastic fittings be properly grounded.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThese reducers allow fitting of a 4\" dust collection hose to a 5\" hose.\u003c\/li\u003e\n \u003cli\u003eSmaller opening has 3.940\" OD and 3.700\" ID\u003c\/li\u003e\n \u003cli\u003eLarger opening has 4.900\" OD 4.700\" ID\u003c\/li\u003e\n \u003cli\u003eOverall height is 4.75\"\u003c\/li\u003e\n \u003cli\u003eHas flange to allow easy assembly and disassembly\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6689006289047,"title":"Polishing Microfinishing Sand Paper Film Flexible Backing NON PSA 8-1\/2 Inches x 11 Inches (1, 6 Pc set 30, 15, 9, 3, 2 and 1 Micron)","handle":"polishing-microfinishing-sand-paper-film-flexible-backing-non-psa-8-1-2-inches-x-11-inches-1-6-pc-set-30-15-9-3-2-and-1-micron","description":"\u003ch3\u003ePolishing Microfinishing Sand Paper Film Flexible Backing NON PSA 8-1\/2 Inches x 11 Inches (1, 6 Pc set 30, 15, 9, 3, 2 and 1 Micron)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 | Size:6 Pc set 30, 15, 9, 3, 2 and 1 Micron The\nsuperior flexibility of the non-woven, tear-resistant synthetic backing on\nthis Polishing Paper allows for fast and easy finishing and polishing of\nnumerous materials, even on highly contoured surfaces. They are excellent for\nfinishing jewelry and precious metals. They will remove scratches and restores\ntransparency to acrylic and polycarbonate windows on buses, aircraft and\ntrains. They are ideal for plastic, polyurethanes, fiberglass, solid surface\ncomposites and wood. Their precision micron grading provides a uniform,\nconsistent finish which shortens hand-sanding and buffing time, reduces\nfinishing steps and saves time. They can be easily cut into strips. They can\nbe used wet or dry. These sheets will not load or clog easily, and can be\nwashed with soap and water. Polishing paper available with micron graded\nsilicon carbide or aluminum oxide minerals. Sheets are color-coded for easy\nidentification. Available in the following grades: 30 micron (600 grit)\nSilicon Carbide, Army Green, 15 micron (1200 grit) Silicon Carbide, Grey, 9\nmicron (1800 grit) Aluminum Oxide, Sky Blue, 3 micron (8000 grit) Aluminum\nOxide, Pink, 2 micron (10,000 grit) Aluminum Oxide, Aqua Blue and 1 micron\n(14,000 grit) Aluminum Oxide, Ivory. All sheets are Non PSA (Pressure\nSensitive Adhesive). All sheets are 8-1\/2 inches x 11 inches.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe superior flexibility of the non-woven, tear-resistant synthetic backing on this Polishing Paper allows for fast and easy finishing and polishing, even on highly contoured surfaces\u003c\/li\u003e\n \u003cli\u003eCan be used to polish precious metals, acrylic, polycarbonate, plastic, fiberglass, solid surface composites, wood and more\u003c\/li\u003e\n \u003cli\u003ePrecision micron coated grading for a uniform, consistent finish which shortens hand sanding and buffing time and reduces overall finishing steps saving time\u003c\/li\u003e\n \u003cli\u003eCan be used wet or dry. These sheets will not load or clog easily, and can be washed with soap and water.\u003c\/li\u003e\n \u003cli\u003eAvailable in the following grades: 30 micron (600 grit) Silicon Carbide Army Green, 15 micron (1200 grit) Silicon Carbide Grey, 9 micron (1800 grit) Aluminum Oxide Sky Blue, 3 micron Aluminum Oxide Pink (8000 grit), 2 micron (10,000 grit) Aluminum Oxide Aqua Blue and 1 micron (14,000 grit) Ivory.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-05T19:58:21+10:00","created_at":"2021-04-05T19:58:21+10:00","vendor":"Taytools","type":"Sanding Sheets","tags":["nn05"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39717986271383,"title":"1 \/ 6 Pc set 30, 15, 9, 3, 2 and 1 Micron","option1":"1","option2":"6 Pc set 30, 15, 9, 3, 2 and 1 Micron","option3":null,"sku":"B07X56G951","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polishing Microfinishing Sand Paper Film Flexible Backing NON PSA 8-1\/2 Inches x 11 Inches (1, 6 Pc set 30, 15, 9, 3, 2 and 1 Micron) - 1 \/ 6 Pc set 30, 15, 9, 3, 2 and 1 Micron","public_title":"1 \/ 6 Pc set 30, 15, 9, 3, 2 and 1 Micron","options":["1","6 Pc set 30, 15, 9, 3, 2 and 1 Micron"],"price":11100,"weight":56,"compare_at_price":null,"inventory_management":null,"barcode":"0796029768938","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07X56G951.jpg?v=1651225288"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X56G951.jpg?v=1651225288","options":["Item Package Quantity","Size"],"media":[{"alt":"Polishing Microfinishing Sand Paper Film Flexible Backing NON PSA 8-1\/2 Inches x 11 Inches (1, 6 Pc set 30, 15, 9, 3, 2 and 1 Micron) - NewNest Australia","id":27768589254807,"position":1,"preview_image":{"aspect_ratio":1.263,"height":1710,"width":2160,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X56G951.jpg?v=1651225288"},"aspect_ratio":1.263,"height":1710,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X56G951.jpg?v=1651225288","width":2160}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePolishing Microfinishing Sand Paper Film Flexible Backing NON PSA 8-1\/2 Inches x 11 Inches (1, 6 Pc set 30, 15, 9, 3, 2 and 1 Micron)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eItem Package Quantity:1 | Size:6 Pc set 30, 15, 9, 3, 2 and 1 Micron The\nsuperior flexibility of the non-woven, tear-resistant synthetic backing on\nthis Polishing Paper allows for fast and easy finishing and polishing of\nnumerous materials, even on highly contoured surfaces. They are excellent for\nfinishing jewelry and precious metals. They will remove scratches and restores\ntransparency to acrylic and polycarbonate windows on buses, aircraft and\ntrains. They are ideal for plastic, polyurethanes, fiberglass, solid surface\ncomposites and wood. Their precision micron grading provides a uniform,\nconsistent finish which shortens hand-sanding and buffing time, reduces\nfinishing steps and saves time. They can be easily cut into strips. They can\nbe used wet or dry. These sheets will not load or clog easily, and can be\nwashed with soap and water. Polishing paper available with micron graded\nsilicon carbide or aluminum oxide minerals. Sheets are color-coded for easy\nidentification. Available in the following grades: 30 micron (600 grit)\nSilicon Carbide, Army Green, 15 micron (1200 grit) Silicon Carbide, Grey, 9\nmicron (1800 grit) Aluminum Oxide, Sky Blue, 3 micron (8000 grit) Aluminum\nOxide, Pink, 2 micron (10,000 grit) Aluminum Oxide, Aqua Blue and 1 micron\n(14,000 grit) Aluminum Oxide, Ivory. All sheets are Non PSA (Pressure\nSensitive Adhesive). All sheets are 8-1\/2 inches x 11 inches.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe superior flexibility of the non-woven, tear-resistant synthetic backing on this Polishing Paper allows for fast and easy finishing and polishing, even on highly contoured surfaces\u003c\/li\u003e\n \u003cli\u003eCan be used to polish precious metals, acrylic, polycarbonate, plastic, fiberglass, solid surface composites, wood and more\u003c\/li\u003e\n \u003cli\u003ePrecision micron coated grading for a uniform, consistent finish which shortens hand sanding and buffing time and reduces overall finishing steps saving time\u003c\/li\u003e\n \u003cli\u003eCan be used wet or dry. These sheets will not load or clog easily, and can be washed with soap and water.\u003c\/li\u003e\n \u003cli\u003eAvailable in the following grades: 30 micron (600 grit) Silicon Carbide Army Green, 15 micron (1200 grit) Silicon Carbide Grey, 9 micron (1800 grit) Aluminum Oxide Sky Blue, 3 micron Aluminum Oxide Pink (8000 grit), 2 micron (10,000 grit) Aluminum Oxide Aqua Blue and 1 micron (14,000 grit) Ivory.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":6703680716951,"title":"Router Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110","handle":"router-bit-storage-tray-holder-13-x-10-75-x-1-125-high-density-foam-for-110-bits-60-each-1-4-and-50-each-1-2-rbt-110","description":"\u003ch3\u003eRouter Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOrganize and protect router bits in drawers and on shelves with this handy\ntray. Overall size is 10.75\" wide by 13\" long by 1.125\" thick. Will hold a\ntotal of 110 bits, 60 each 1\/4 inch diameter bits and 60 each 1\/2\" diameter\nbits. Made from high density foam that can be easily cut to fit any\napplication.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOrganize and protect router bits in drawers and on shelves with this handy trays\u003c\/li\u003e\n \u003cli\u003e10.75\" wide by 13\" long by 1.125\" thick\u003c\/li\u003e\n \u003cli\u003eHolds 60 each 1\/4\" bits and 50 each 1\/2\" bits\u003c\/li\u003e\n \u003cli\u003eMade from high density foam\u003c\/li\u003e\n \u003cli\u003eCan be easily cut to fit any application.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-04-09T00:55:12+10:00","created_at":"2021-04-09T00:55:12+10:00","vendor":"Taytools","type":"Tool Organizers","tags":["nn05"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39749129633943,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01N5GMX1U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Router Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110","public_title":null,"options":["Default Title"],"price":13900,"weight":186,"compare_at_price":null,"inventory_management":null,"barcode":"791617731448","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B01N5GMX1U.jpg?v=1651236776","\/\/newnestshop.com\/cdn\/shop\/products\/91sECoy5Y5L.jpg?v=1622447550","\/\/newnestshop.com\/cdn\/shop\/products\/91-zd7Z83kL.jpg?v=1622447550"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B01N5GMX1U.jpg?v=1651236776","options":["Title"],"media":[{"alt":"Router Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110 - NewNest Australia","id":27770978402455,"position":1,"preview_image":{"aspect_ratio":1.501,"height":1705,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01N5GMX1U.jpg?v=1651236776"},"aspect_ratio":1.501,"height":1705,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B01N5GMX1U.jpg?v=1651236776","width":2560},{"alt":"Router Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110 - NewNest Australia","id":21378313158807,"position":2,"preview_image":{"aspect_ratio":1.267,"height":2020,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91sECoy5Y5L.jpg?v=1622447550"},"aspect_ratio":1.267,"height":2020,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91sECoy5Y5L.jpg?v=1622447550","width":2560},{"alt":"Router Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110 - NewNest Australia","id":21378313191575,"position":3,"preview_image":{"aspect_ratio":1.501,"height":1705,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/91-zd7Z83kL.jpg?v=1622447550"},"aspect_ratio":1.501,"height":1705,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/91-zd7Z83kL.jpg?v=1622447550","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eRouter Bit Storage Tray Holder 13\" x 10.75: x 1.125\" High Density Foam for 110 bits (60 Each 1\/4\" and 50 Each 1\/2\") RBT-110\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOrganize and protect router bits in drawers and on shelves with this handy\ntray. Overall size is 10.75\" wide by 13\" long by 1.125\" thick. Will hold a\ntotal of 110 bits, 60 each 1\/4 inch diameter bits and 60 each 1\/2\" diameter\nbits. Made from high density foam that can be easily cut to fit any\napplication.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOrganize and protect router bits in drawers and on shelves with this handy trays\u003c\/li\u003e\n \u003cli\u003e10.75\" wide by 13\" long by 1.125\" thick\u003c\/li\u003e\n \u003cli\u003eHolds 60 each 1\/4\" bits and 50 each 1\/2\" bits\u003c\/li\u003e\n \u003cli\u003eMade from high density foam\u003c\/li\u003e\n \u003cli\u003eCan be easily cut to fit any application.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7792454140055,"title":"Taytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles","handle":"taytools-204050-8-piece-set-flexible-contour-sanding-grips-with-3-flexible-foam-pads-and-5-profile-grips-for-sanding-convex-and-concave-profiles","description":"\u003ch3\u003eTaytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis 8 piece set of flexible contour sanding grips makes short work of sanding\nboth concave and convex shapes without distortion of the profile. Just wrap\nsandpaper around the profile and start sanding. The set contains: 3 flexible\nfoam contour pads each 5-1\/2 inches x 2-3\/4 inches in 3 thicknesses (7\/16,\n7\/32 and 5\/32), 4 convex contours (9\/16, 7\/16, 5\/16 and 1\/8) and one concave\nprofile (1 inch). Contour pads have micro edge profiles on opposite end for\nflat, radius and knife edge profiles. Contours are made from flexible yet firm\nrubber to conform to variations in profiles. Rubber material grabs sandpaper\nand prevents it from slipping.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis 8 piece set of flexible contour sanding grips makes short work of sanding both concave and convex shapes without distortion of the profile\u003c\/li\u003e\n \u003cli\u003eJust wrap sandpaper around the profile and start sanding\u003c\/li\u003e\n \u003cli\u003eThe set contains: 3 flexible foam contour pads in 3 thicknesses, 4 convex contours and one concave profile\u003c\/li\u003e\n \u003cli\u003eContour pads have micro edge profiles for flat, radius and knife edge profiles\u003c\/li\u003e\n \u003cli\u003eContours are made from flexible yet firm rubber to conform to variations in profiles\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-09-27T22:01:59+10:00","created_at":"2022-09-27T22:02:01+10:00","vendor":"Taytools","type":"Sanding Blocks","tags":["workwarehouse"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42556884091031,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B078VWD378","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles","public_title":null,"options":["Default Title"],"price":11400,"weight":156,"compare_at_price":null,"inventory_management":null,"barcode":"700667471198","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B078VWD378.jpg?v=1664280121","\/\/newnestshop.com\/cdn\/shop\/products\/719TYnOdDUL.jpg?v=1664280121"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B078VWD378.jpg?v=1664280121","options":["Title"],"media":[{"alt":"Taytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles - NewNest Australia","id":29839506407575,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B078VWD378.jpg?v=1664280121"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B078VWD378.jpg?v=1664280121","width":2560},{"alt":"Taytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles - NewNest Australia","id":29839506440343,"position":2,"preview_image":{"aspect_ratio":1.85,"height":1384,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/719TYnOdDUL.jpg?v=1664280121"},"aspect_ratio":1.85,"height":1384,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/719TYnOdDUL.jpg?v=1664280121","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTaytools 204050 8 Piece Set Flexible Contour Sanding Grips with 3 Flexible Foam Pads and 5 Profile Grips for Sanding Convex and Concave Profiles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis 8 piece set of flexible contour sanding grips makes short work of sanding\nboth concave and convex shapes without distortion of the profile. Just wrap\nsandpaper around the profile and start sanding. The set contains: 3 flexible\nfoam contour pads each 5-1\/2 inches x 2-3\/4 inches in 3 thicknesses (7\/16,\n7\/32 and 5\/32), 4 convex contours (9\/16, 7\/16, 5\/16 and 1\/8) and one concave\nprofile (1 inch). Contour pads have micro edge profiles on opposite end for\nflat, radius and knife edge profiles. Contours are made from flexible yet firm\nrubber to conform to variations in profiles. Rubber material grabs sandpaper\nand prevents it from slipping.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis 8 piece set of flexible contour sanding grips makes short work of sanding both concave and convex shapes without distortion of the profile\u003c\/li\u003e\n \u003cli\u003eJust wrap sandpaper around the profile and start sanding\u003c\/li\u003e\n \u003cli\u003eThe set contains: 3 flexible foam contour pads in 3 thicknesses, 4 convex contours and one concave profile\u003c\/li\u003e\n \u003cli\u003eContour pads have micro edge profiles for flat, radius and knife edge profiles\u003c\/li\u003e\n \u003cli\u003eContours are made from flexible yet firm rubber to conform to variations in profiles\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":6849521123479,"title":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels","handle":"taytools-467061-diamond-grinding-wheel-cleaner-dresser-36-grit-for-6-or-8-inch-grinder-wheels","description":"\u003ch3\u003eTaytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRemove any debris or imperfection from your grinding wheel with this 36-grit\ngrinder wheel dresser. Keeping your grinding wheel clean and straight will\nimprove the accuracy and quality of all your sharpening and grinding\noperations. Works equally well on any 6” or 8” diameter grinding wheel. 36\ngrit diamond surface is 1\/2” wide by 1-3\/4” long. Overall length of the tool\nis 4-5\/8”. Handle has knurled surface for increased control. To use, place\ngrinder tool rest close to grinding wheel, place dresser head on grinder tool\nrest and contact spinning grinding wheel with even and light pressure. Gently\nmove side to side continuing to apply light pressure until wheel is clean,\nstraight and free of all imperfections.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRemove debris or imperfections from your grinding wheel with this 36-grit grinder wheel dresser. Keeping your grinding wheel clean and straight will improve the accuracy and quality of all your sharpening and grinding operations.\u003c\/li\u003e\n \u003cli\u003eWorks with any 6 or 8 diameter grinding wheel\u003c\/li\u003e\n \u003cli\u003eDiamond surface is 1\/2 wide by 1-3\/4 long\u003c\/li\u003e\n \u003cli\u003eOverall length 4-5\/8. Handle comes with knurled surface for increased control.\u003c\/li\u003e\n \u003cli\u003eTo use, place shaft on grinder tool rest and contact spinning grinding wheel with even and light pressure. Gently move side to side continuing to apply light pressure until wheel is clean, straight and free of all imperfections.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-05-11T20:51:43+10:00","created_at":"2021-05-11T20:51:43+10:00","vendor":"Taytools","type":"Sharpening Stones","tags":["nn06"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40068553801879,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07NF7GTXH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels","public_title":null,"options":["Default Title"],"price":9800,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"467061","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07NF7GTXH.jpg?v=1651286780","\/\/newnestshop.com\/cdn\/shop\/products\/814qIbBHVlL.jpg?v=1622502173","\/\/newnestshop.com\/cdn\/shop\/products\/81ueO6NsVTL.jpg?v=1622502173","\/\/newnestshop.com\/cdn\/shop\/products\/71rzbV6xgzL.jpg?v=1622502173"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07NF7GTXH.jpg?v=1651286780","options":["Title"],"media":[{"alt":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels - NewNest Australia","id":27778224750743,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07NF7GTXH.jpg?v=1651286780"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07NF7GTXH.jpg?v=1651286780","width":2560},{"alt":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels - NewNest Australia","id":22809249185943,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/814qIbBHVlL.jpg?v=1622502173"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/814qIbBHVlL.jpg?v=1622502173","width":2560},{"alt":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels - NewNest Australia","id":22809249251479,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/81ueO6NsVTL.jpg?v=1622502173"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/81ueO6NsVTL.jpg?v=1622502173","width":2560},{"alt":"Taytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels - NewNest Australia","id":22809249284247,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71rzbV6xgzL.jpg?v=1622502173"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71rzbV6xgzL.jpg?v=1622502173","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTaytools 467061 Diamond Grinding Wheel Cleaner\/Dresser 36 Grit for 6 or 8 Inch Grinder Wheels\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRemove any debris or imperfection from your grinding wheel with this 36-grit\ngrinder wheel dresser. Keeping your grinding wheel clean and straight will\nimprove the accuracy and quality of all your sharpening and grinding\noperations. Works equally well on any 6” or 8” diameter grinding wheel. 36\ngrit diamond surface is 1\/2” wide by 1-3\/4” long. Overall length of the tool\nis 4-5\/8”. Handle has knurled surface for increased control. To use, place\ngrinder tool rest close to grinding wheel, place dresser head on grinder tool\nrest and contact spinning grinding wheel with even and light pressure. Gently\nmove side to side continuing to apply light pressure until wheel is clean,\nstraight and free of all imperfections.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRemove debris or imperfections from your grinding wheel with this 36-grit grinder wheel dresser. Keeping your grinding wheel clean and straight will improve the accuracy and quality of all your sharpening and grinding operations.\u003c\/li\u003e\n \u003cli\u003eWorks with any 6 or 8 diameter grinding wheel\u003c\/li\u003e\n \u003cli\u003eDiamond surface is 1\/2 wide by 1-3\/4 long\u003c\/li\u003e\n \u003cli\u003eOverall length 4-5\/8. Handle comes with knurled surface for increased control.\u003c\/li\u003e\n \u003cli\u003eTo use, place shaft on grinder tool rest and contact spinning grinding wheel with even and light pressure. Gently move side to side continuing to apply light pressure until wheel is clean, straight and free of all imperfections.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7799433363607,"title":"Taytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1\/2 Inches, Black Metal Finish","handle":"taytools-469416-7-inch-woodturning-double-ended-bowl-calipers-overall-length-14-1-2-inches-black-metal-finish","description":"\u003ch3\u003eTaytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1\/2 Inches, Black Metal Finish\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble-ended wood turner’s calipers are designed to accurately and easily\nmeasure wall thickness and diameters in hollow forms and bowls. The double-\nended design means that measurements taken at one end automatically transfer\nto the other end allowing accurate reading without removing the calipers from\na project. Caliper measures 7 inches from pivot point to the tips. Maximum\nmeasuring depth 6-1\/2 inches. Overall size is 14-1\/2 inches. Made of blackened\nsteel to prevent corrosion. Has solid brass pivot screw and wing nut.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDouble-ended wood turners calipers are designed to accurately and easily measure wall thicknesses and diameters in in hollow forms and bowls\u003c\/li\u003e\n \u003cli\u003eThe double-ended design means that measurements taken at one end automatically transfer to the other end allowing accurate reading without removing the calipers from a project\u003c\/li\u003e\n \u003cli\u003eCaliper measures 7 inches from pivot point to the tips. Maximum measuring depth 6-1\/2\".\u003c\/li\u003e\n \u003cli\u003eOverall size is 14-1\/2 inches\u003c\/li\u003e\n \u003cli\u003eMade with gun metal finished steel and solid brass hardware\u003c\/li\u003e\n \u003c\/ul\u003e\n","published_at":"2022-10-04T03:50:57+11:00","created_at":"2022-10-04T03:50:59+11:00","vendor":"Taytools","type":"Joint Calipers \u0026 Dividers","tags":["workwarehouse"],"price":14100,"price_min":14100,"price_max":14100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42574728364183,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DCBJSTG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1\/2 Inches, Black Metal Finish","public_title":null,"options":["Default Title"],"price":14100,"weight":295,"compare_at_price":null,"inventory_management":null,"barcode":"700667469416","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07DCBJSTG.jpg?v=1664815859"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DCBJSTG.jpg?v=1664815859","options":["Title"],"media":[{"alt":"Taytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1\/2 Inches, Black Metal Finish - NewNest Australia","id":29916324495511,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DCBJSTG.jpg?v=1664815859"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07DCBJSTG.jpg?v=1664815859","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTaytools 469416 7 Inch Woodturning Double Ended Bowl Calipers, Overall Length 14-1\/2 Inches, Black Metal Finish\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble-ended wood turner’s calipers are designed to accurately and easily\nmeasure wall thickness and diameters in hollow forms and bowls. The double-\nended design means that measurements taken at one end automatically transfer\nto the other end allowing accurate reading without removing the calipers from\na project. Caliper measures 7 inches from pivot point to the tips. Maximum\nmeasuring depth 6-1\/2 inches. Overall size is 14-1\/2 inches. Made of blackened\nsteel to prevent corrosion. Has solid brass pivot screw and wing nut.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDouble-ended wood turners calipers are designed to accurately and easily measure wall thicknesses and diameters in in hollow forms and bowls\u003c\/li\u003e\n \u003cli\u003eThe double-ended design means that measurements taken at one end automatically transfer to the other end allowing accurate reading without removing the calipers from a project\u003c\/li\u003e\n \u003cli\u003eCaliper measures 7 inches from pivot point to the tips. Maximum measuring depth 6-1\/2\".\u003c\/li\u003e\n \u003cli\u003eOverall size is 14-1\/2 inches\u003c\/li\u003e\n \u003cli\u003eMade with gun metal finished steel and solid brass hardware\u003c\/li\u003e\n \u003c\/ul\u003e\n"}

{"id":6843766145175,"title":"Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound","handle":"taytools-genuine-horse-butt-leather-strop-12-inches-x-3-inches-x-1-8-inch-thick-with-1-2-ounce-bar-green-chromium-oxide-0-5-micron-micro-fine-polishing-compound","description":"\u003ch3\u003eTaytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHORSE BUTT LEATHER STROP For over 100 years, the best razor strops were made\nfrom tough horse butt leather. Horse butt leather is some of the hardest,\ntoughest and most durable leather you can buy. The natural silicates found in\nbare leather are what abrade and polish steel. Horse butt has a higher\nsilicate concentration than most any other leather making it the perfect\nstropping material. This horse butt strop will put a scary, wicked sharp edge\non razors, knives, carving chisels and woodworking tools. This strop has two\ndistinct sides, a smooth hair side and a slightly rougher flesh side. The\nrough flesh side is perfect for holding polishing compound and useful for\ninitial stropping. The smooth hair side is best used plain for the final\nstrop. These have been custom die cut to our specifications with the overall\nsize being 12 inches x 3 inches. The material is 3\/32 to 9\/64 inch thick and\ncan taper slightly from one end to the other. The leather is not dyed, so\ncoloration will vary. GREEN CHROMIUM OXIE MICRO FINE POLISHIGN COMPOUND This\nMicro Fine Chromium Oxide polishing compound is specially designed for use\nwith leather strops to put a scary sharp, polished, mirror-edge on knives,\ncarving chisels and woodworking tools. Rather than removing metal, stropping\nwith chromium oxide compound, polishes and refines the cutting edge. The waxy\nconsistency allows it to adhere well to any substrate without powdering.\nSimply rub the bar evenly on the surface like a crayon. A little goes a very\nlong way, so this small bar will last for a very long time. After applying\ncompound to a strop, polish your knives and blades to a mirror, razor sharp\nfinish. To achieve the best possible edge, finish honing by polishing your\nedge on raw leather. This compound is micro fine with a 0.5 micron particle\nsize and will produce an edge equivalent to 60,000 grit. Chromium Oxide\n(Cr2O3) is a superfine, polycrystalline abrasive, it is the mineral that gives\ngreen polishing compound its color.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis is a set containing on 12 inch x 3 inch X 1\/8 inch horse butt leather strop and one 1.2 ounce bar of green chromium oxide micro fine polishing compound\u003c\/li\u003e\n \u003cli\u003eUsed together this horse butt strop and chromium oxide compound will put a scary, wicked sharp edge on razors, knives, carving chisels and woodworking tools\u003c\/li\u003e\n \u003cli\u003eHorse butt leather is some of the hardest, toughest and most durable leather you can buy. The natural silicates found in bare leather are what abrade and polish steel. Horse butt has a higher silicate concentration than most any other leather making it the perfect stropping material.\u003c\/li\u003e\n \u003cli\u003eMicro Fine Chromium Oxide polishing compound is specially designed for use with leather strops to put a scary sharp, polished, mirror-edge on knives, carving chisels and woodworking tools. The waxy consistency allows it to adhere well to any substrate without powdering. Simply rub the bar evenly on the surface like a crayon. A little goes a very long way, so this small bar will last for a very long time.\u003c\/li\u003e\n \u003cli\u003eThis strop has two distinct sides, a smooth hair side and a slightly rougher flesh side. The rough flesh side is perfect for holding polishing compound and useful for initial stropping. The smooth hair side is best used plain for the final strop.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-05-09T20:19:21+10:00","created_at":"2021-05-09T20:19:21+10:00","vendor":"Taytools","type":"Sharpening Stones","tags":["nn06"],"price":13600,"price_min":13600,"price_max":13600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40055638065303,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07X1ZHX6V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound","public_title":null,"options":["Default Title"],"price":13600,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"469638","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07X1ZHX6V.jpg?v=1651278995","\/\/newnestshop.com\/cdn\/shop\/products\/71Pt9bYF7_2BL.jpg?v=1622494190","\/\/newnestshop.com\/cdn\/shop\/products\/71G2lTLCOSL.jpg?v=1622494190"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X1ZHX6V.jpg?v=1651278995","options":["Title"],"media":[{"alt":"Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound - NewNest Australia","id":27776869433495,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X1ZHX6V.jpg?v=1651278995"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07X1ZHX6V.jpg?v=1651278995","width":2560},{"alt":"Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound - NewNest Australia","id":22781683269783,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1707,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Pt9bYF7_2BL.jpg?v=1622494190"},"aspect_ratio":1.5,"height":1707,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71Pt9bYF7_2BL.jpg?v=1622494190","width":2560},{"alt":"Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound - NewNest Australia","id":22781683302551,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1920,"width":2560,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71G2lTLCOSL.jpg?v=1622494190"},"aspect_ratio":1.333,"height":1920,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71G2lTLCOSL.jpg?v=1622494190","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTaytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1\/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHORSE BUTT LEATHER STROP For over 100 years, the best razor strops were made\nfrom tough horse butt leather. Horse butt leather is some of the hardest,\ntoughest and most durable leather you can buy. The natural silicates found in\nbare leather are what abrade and polish steel. Horse butt has a higher\nsilicate concentration than most any other leather making it the perfect\nstropping material. This horse butt strop will put a scary, wicked sharp edge\non razors, knives, carving chisels and woodworking tools. This strop has two\ndistinct sides, a smooth hair side and a slightly rougher flesh side. The\nrough flesh side is perfect for holding polishing compound and useful for\ninitial stropping. The smooth hair side is best used plain for the final\nstrop. These have been custom die cut to our specifications with the overall\nsize being 12 inches x 3 inches. The material is 3\/32 to 9\/64 inch thick and\ncan taper slightly from one end to the other. The leather is not dyed, so\ncoloration will vary. GREEN CHROMIUM OXIE MICRO FINE POLISHIGN COMPOUND This\nMicro Fine Chromium Oxide polishing compound is specially designed for use\nwith leather strops to put a scary sharp, polished, mirror-edge on knives,\ncarving chisels and woodworking tools. Rather than removing metal, stropping\nwith chromium oxide compound, polishes and refines the cutting edge. The waxy\nconsistency allows it to adhere well to any substrate without powdering.\nSimply rub the bar evenly on the surface like a crayon. A little goes a very\nlong way, so this small bar will last for a very long time. After applying\ncompound to a strop, polish your knives and blades to a mirror, razor sharp\nfinish. To achieve the best possible edge, finish honing by polishing your\nedge on raw leather. This compound is micro fine with a 0.5 micron particle\nsize and will produce an edge equivalent to 60,000 grit. Chromium Oxide\n(Cr2O3) is a superfine, polycrystalline abrasive, it is the mineral that gives\ngreen polishing compound its color.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis is a set containing on 12 inch x 3 inch X 1\/8 inch horse butt leather strop and one 1.2 ounce bar of green chromium oxide micro fine polishing compound\u003c\/li\u003e\n \u003cli\u003eUsed together this horse butt strop and chromium oxide compound will put a scary, wicked sharp edge on razors, knives, carving chisels and woodworking tools\u003c\/li\u003e\n \u003cli\u003eHorse butt leather is some of the hardest, toughest and most durable leather you can buy. The natural silicates found in bare leather are what abrade and polish steel. Horse butt has a higher silicate concentration than most any other leather making it the perfect stropping material.\u003c\/li\u003e\n \u003cli\u003eMicro Fine Chromium Oxide polishing compound is specially designed for use with leather strops to put a scary sharp, polished, mirror-edge on knives, carving chisels and woodworking tools. The waxy consistency allows it to adhere well to any substrate without powdering. Simply rub the bar evenly on the surface like a crayon. A little goes a very long way, so this small bar will last for a very long time.\u003c\/li\u003e\n \u003cli\u003eThis strop has two distinct sides, a smooth hair side and a slightly rougher flesh side. The rough flesh side is perfect for holding polishing compound and useful for initial stropping. The smooth hair side is best used plain for the final strop.\u003c\/li\u003e\n \u003c\/ul\u003e"}