TigerBite

{"id":7061567471767,"title":"1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 1\/2\" 90 Degree","handle":"1-2-elbow-u248lf-with-disconnect-clip-lead-free-brass-coupling-for-copper-pex-cpvc-hdpe-and-pe-rt-residential-or-commercial-plumbing-100-satisfaction-guarantee-2-pack-1-2-90-degree","description":"\u003ch3\u003e1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\/2\" 90 Degree INCLUDES: (2) 1\/2\" 90-Degree Elbow Couplings, (1) 1\/2\"\nDisconnect Clip, and (1) Push-Fit Installation Tips. Integral tube liner for\nPEX installations which means no loose connections. Made of Lead Free DZR\n(dezincification resistant) brass which provides a strong, durable fitting\nthat is corrosion resistant. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. These\nfittings are lead free and meet all requirements for plumbing in California\nand Vermont. Lifetime Warranty. Helpful Hints: Do not attempt to insert the\ntubing into the stiffener while the stiffener is inside the fitting because\nthe stiffener will not properly seat into the PEX. Remove the stiffener (using\nthe disconnect clip and needle-nose pliers), and insert it into the PEX and\nthen insert the PEX into the fitting. (Most people get a water tight seal\nwithout the stiffener so they elect not to use it.)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-08-03T02:48:16+10:00","created_at":"2021-08-03T02:48:16+10:00","vendor":"TigerBite","type":"Pipe Fittings","tags":["imagename","nn08"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40648537309335,"title":"1\/2\" 90 Degree","option1":"1\/2\" 90 Degree","option2":null,"option3":null,"sku":"B07171B1TY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 1\/2\" 90 Degree - 1\/2\" 90 Degree","public_title":"1\/2\" 90 Degree","options":["1\/2\" 90 Degree"],"price":12000,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"SHARKBITE052ED","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY_d20cc990-d31a-4c3d-8257-d6c0ac08f163.jpg?v=1651852420","\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY.jpg?v=1651852297","\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_b97a8367-0017-4046-92cb-7ffd4c81baf4.jpg?v=1628887590"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY_d20cc990-d31a-4c3d-8257-d6c0ac08f163.jpg?v=1651852420","options":["Size"],"media":[{"alt":"1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 1\/2\" 90 Degree - NewNest Australia","id":27875117531287,"position":1,"preview_image":{"aspect_ratio":1.232,"height":406,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY_d20cc990-d31a-4c3d-8257-d6c0ac08f163.jpg?v=1651852420"},"aspect_ratio":1.232,"height":406,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY_d20cc990-d31a-4c3d-8257-d6c0ac08f163.jpg?v=1651852420","width":500},{"alt":"1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 1\/2\" 90 Degree - NewNest Australia","id":27875108094103,"position":2,"preview_image":{"aspect_ratio":1.232,"height":406,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY.jpg?v=1651852297"},"aspect_ratio":1.232,"height":406,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07171B1TY.jpg?v=1651852297","width":500},{"alt":"1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 1\/2\" 90 Degree - NewNest Australia","id":23923119259799,"position":3,"preview_image":{"aspect_ratio":1.836,"height":683,"width":1254,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_b97a8367-0017-4046-92cb-7ffd4c81baf4.jpg?v=1628887590"},"aspect_ratio":1.836,"height":683,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_b97a8367-0017-4046-92cb-7ffd4c81baf4.jpg?v=1628887590","width":1254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e1\/2\" Elbow U248LF with Disconnect Clip - Lead Free Brass Coupling for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:1\/2\" 90 Degree INCLUDES: (2) 1\/2\" 90-Degree Elbow Couplings, (1) 1\/2\"\nDisconnect Clip, and (1) Push-Fit Installation Tips. Integral tube liner for\nPEX installations which means no loose connections. Made of Lead Free DZR\n(dezincification resistant) brass which provides a strong, durable fitting\nthat is corrosion resistant. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. These\nfittings are lead free and meet all requirements for plumbing in California\nand Vermont. Lifetime Warranty. Helpful Hints: Do not attempt to insert the\ntubing into the stiffener while the stiffener is inside the fitting because\nthe stiffener will not properly seat into the PEX. Remove the stiffener (using\nthe disconnect clip and needle-nose pliers), and insert it into the PEX and\nthen insert the PEX into the fitting. (Most people get a water tight seal\nwithout the stiffener so they elect not to use it.)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7055305146519,"title":"1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 2 Pack Slip","handle":"1-2-slip-coupling-u3008lf-with-disconnect-clip-lead-free-brass-fitting-for-copper-pex-cpvc-hdpe-and-pe-rt-residential-or-commercial-plumbing-100-satisfaction-guarantee-2-pack-2-pack-slip","description":"\u003ch3\u003e1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:2 Pack Slip INCLUDES: (2) 1\/2\" Straight Slip Couplings, (1) 1\/2\"\nDisconnect Clip, and (1) Push-Fit Installation Tips. Integral tube liner for\nPEX installations which means no loose connections. Made of Lead Free DZR\n(dezincification resistant) brass which provides a strong, durable fitting\nthat is corrosion resistant. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. These\nfittings are lead free and meet all requirements for plumbing in California\nand Vermont. Lifetime Warranty. Helpful Hints: Do not attempt to insert the\ntubing into the stiffener while the stiffener is inside the fitting because\nthe stiffener will not properly seat into the PEX. Remove the stiffener (using\nthe disconnect clip and needle-nose pliers), and insert it into the PEX and\nthen insert the PEX into the fitting. (Most people get a water tight seal\nwithout the stiffener so they elect not to use it.)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull. (8) WARNING when using flex tubing on slip end stiffener is required.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-07-30T22:49:43+10:00","created_at":"2021-07-30T22:49:43+10:00","vendor":"TigerBite","type":"Pipe Fittings","tags":["nn08"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40630173728919,"title":"2 Pack Slip","option1":"2 Pack Slip","option2":null,"option3":null,"sku":"B078QX83F5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 2 Pack Slip - 2 Pack Slip","public_title":"2 Pack Slip","options":["2 Pack Slip"],"price":15500,"weight":272,"compare_at_price":null,"inventory_management":null,"barcode":"SHARKBITE502SLD","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B078QX83F5.jpg?v=1651844167","\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_4525dfec-6885-40dd-9742-85bd3850e10b.jpg?v=1628886024"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B078QX83F5.jpg?v=1651844167","options":["Size"],"media":[{"alt":"1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 2 Pack Slip - NewNest Australia","id":27874317205655,"position":1,"preview_image":{"aspect_ratio":1.701,"height":294,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B078QX83F5.jpg?v=1651844167"},"aspect_ratio":1.701,"height":294,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B078QX83F5.jpg?v=1651844167","width":500},{"alt":"1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack) 2 Pack Slip - NewNest Australia","id":23878563266711,"position":2,"preview_image":{"aspect_ratio":1.836,"height":683,"width":1254,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_4525dfec-6885-40dd-9742-85bd3850e10b.jpg?v=1628886024"},"aspect_ratio":1.836,"height":683,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_4525dfec-6885-40dd-9742-85bd3850e10b.jpg?v=1628886024","width":1254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e1\/2\" Slip Coupling U3008LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing - 100% Satisfaction Guarantee (2 Pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:2 Pack Slip INCLUDES: (2) 1\/2\" Straight Slip Couplings, (1) 1\/2\"\nDisconnect Clip, and (1) Push-Fit Installation Tips. Integral tube liner for\nPEX installations which means no loose connections. Made of Lead Free DZR\n(dezincification resistant) brass which provides a strong, durable fitting\nthat is corrosion resistant. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. These\nfittings are lead free and meet all requirements for plumbing in California\nand Vermont. Lifetime Warranty. Helpful Hints: Do not attempt to insert the\ntubing into the stiffener while the stiffener is inside the fitting because\nthe stiffener will not properly seat into the PEX. Remove the stiffener (using\nthe disconnect clip and needle-nose pliers), and insert it into the PEX and\nthen insert the PEX into the fitting. (Most people get a water tight seal\nwithout the stiffener so they elect not to use it.)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull. (8) WARNING when using flex tubing on slip end stiffener is required.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7042959999127,"title":"1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee 20 inch 1\/2\" x 1\/2\" FIP","handle":"1-2x1-2-fip-20-water-heater-hose-kit-with-disconnect-clip-lead-free-fittings-for-copper-pipe-pex-cpvc-hdpe-and-pe-rt-plumbing-100-satisfaction-guarantee-20-inch-1-2-x-1-2-fip","description":"\u003ch3\u003e1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:20 inch 1\/2\" x 1\/2\" FIP INCLUDES: (1) Cold side 20\" Braided Stainless\nSteel Flex Hose with 1\/2\" Ball Valve, (1) Hot side 20\" Braided Stainless Steel\nFlex Hose, (1) 1\/2\" Disconnect Clip, and (1) Push-Fit Installation Tips. Water\nHeater connection ends are 1\/2\" FIP for 0.84\" OD water heater pipe, and Supply\nLine ends are 1\/2\" Push-Fit for 5\/8\" OD supply connection. WARNING: Water\nheaters with SMALL 1\/2\" iron pipe water heater connections are not common.\nIntegral tube liner for PEX installations which means no loose connections.\nMade of Lead Free DZR (dezincification resistant) brass which provides a\nstrong, durable fitting that is corrosion resistant. More than 130 different\nfittings in a variety of sizes, all with Sharkbite grip technology and no\nsoldering, crimps, clamps, unions, or glue, is the push-fit connection system\nthat's really taking hold. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. Use\nTigerBite and get a grip on your next plumbing project. These fittings are\nlead free and meet all requirements for plumbing in California and Vermont.\nColor may vary depending on manufacturer availability. Lifetime Warranty.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003ePush-Fit INSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-07-25T15:28:40+10:00","created_at":"2021-07-25T15:28:40+10:00","vendor":"TigerBite","type":"Pipe Fittings","tags":["nn08"],"price":21300,"price_min":21300,"price_max":21300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40590946140311,"title":"20 inch 1\/2\" x 1\/2\" FIP","option1":"20 inch 1\/2\" x 1\/2\" FIP","option2":null,"option3":null,"sku":"B079VKF2GP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee 20 inch 1\/2\" x 1\/2\" FIP - 20 inch 1\/2\" x 1\/2\" FIP","public_title":"20 inch 1\/2\" x 1\/2\" FIP","options":["20 inch 1\/2\" x 1\/2\" FIP"],"price":21300,"weight":599,"compare_at_price":null,"inventory_management":null,"barcode":"SHARKBITE0520HK","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B079VKF2GP.jpg?v=1651824390","\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL.jpg?v=1627676464"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B079VKF2GP.jpg?v=1651824390","options":["Size"],"media":[{"alt":"1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee 20 inch 1\/2\" x 1\/2\" FIP - NewNest Australia","id":27870834786455,"position":1,"preview_image":{"aspect_ratio":0.846,"height":500,"width":423,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B079VKF2GP.jpg?v=1651824390"},"aspect_ratio":0.846,"height":500,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B079VKF2GP.jpg?v=1651824390","width":423},{"alt":"1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee 20 inch 1\/2\" x 1\/2\" FIP - NewNest Australia","id":23801932644503,"position":2,"preview_image":{"aspect_ratio":1.836,"height":683,"width":1254,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL.jpg?v=1627676464"},"aspect_ratio":1.836,"height":683,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL.jpg?v=1627676464","width":1254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e1\/2x1\/2 FIP 20\" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSize:20 inch 1\/2\" x 1\/2\" FIP INCLUDES: (1) Cold side 20\" Braided Stainless\nSteel Flex Hose with 1\/2\" Ball Valve, (1) Hot side 20\" Braided Stainless Steel\nFlex Hose, (1) 1\/2\" Disconnect Clip, and (1) Push-Fit Installation Tips. Water\nHeater connection ends are 1\/2\" FIP for 0.84\" OD water heater pipe, and Supply\nLine ends are 1\/2\" Push-Fit for 5\/8\" OD supply connection. WARNING: Water\nheaters with SMALL 1\/2\" iron pipe water heater connections are not common.\nIntegral tube liner for PEX installations which means no loose connections.\nMade of Lead Free DZR (dezincification resistant) brass which provides a\nstrong, durable fitting that is corrosion resistant. More than 130 different\nfittings in a variety of sizes, all with Sharkbite grip technology and no\nsoldering, crimps, clamps, unions, or glue, is the push-fit connection system\nthat's really taking hold. It's the easiest way to join copper, CPVC or PEX\npipe in any combination. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. Use\nTigerBite and get a grip on your next plumbing project. These fittings are\nlead free and meet all requirements for plumbing in California and Vermont.\nColor may vary depending on manufacturer availability. Lifetime Warranty.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003ePush-Fit INSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7079286833303,"title":"Push-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack)","handle":"push-fit-disconnect-clip-set-of-1-4-3-8-1-2-3-4-and-1-slip-fitting-removal-tools-100-satisfaction-guarantee-5-pack","description":"\u003ch3\u003ePush-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eINCLUDES: (1) 1\/4\" Disconnect Clip, (1) 3\/8\" Disconnect Clip, (1) 1\/2\"\nDisconnect Clip, (1) 3\/4\" Disconnect Clip, (1) 1\" Disconnect Clip, and (1)\nPush-Fit Installation Tips. More than 130 different fittings in a variety of\nsizes, all with Push Fit grip technology and no soldering, crimps, clamps,\nunions, or glue, is the push-fit connection system that's really taking hold.\nIt's the easiest way to join copper, CPVC or PEX pipe in any combination.\nShark product compatible. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. Use\nTigerBite and get a grip on your next plumbing project. These fittings are\nlead free and meet all requirements for plumbing in California and Vermont.\nColor may vary depending on manufacturer availability. Lifetime Warranty.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2021-08-09T23:23:43+10:00","created_at":"2021-08-09T23:23:43+10:00","vendor":"TigerBite","type":"Pipe Fittings","tags":["nn08"],"price":10000,"price_min":10000,"price_max":10000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40700151234711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07K132KSL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Push-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack)","public_title":null,"options":["Default Title"],"price":10000,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"SHARKBITEDISCKIT","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/newnestshop.com\/cdn\/shop\/products\/B07K132KSL.jpg?v=1651874672","\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_1f86ceb2-a526-4c26-b71d-5e20d1379cd5.jpg?v=1629492861"],"featured_image":"\/\/newnestshop.com\/cdn\/shop\/products\/B07K132KSL.jpg?v=1651874672","options":["Title"],"media":[{"alt":"Push-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack) - NewNest Australia","id":27877831377047,"position":1,"preview_image":{"aspect_ratio":1.511,"height":331,"width":500,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07K132KSL.jpg?v=1651874672"},"aspect_ratio":1.511,"height":331,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/B07K132KSL.jpg?v=1651874672","width":500},{"alt":"Push-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack) - NewNest Australia","id":24060214935703,"position":2,"preview_image":{"aspect_ratio":1.836,"height":683,"width":1254,"src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_1f86ceb2-a526-4c26-b71d-5e20d1379cd5.jpg?v=1629492861"},"aspect_ratio":1.836,"height":683,"media_type":"image","src":"\/\/newnestshop.com\/cdn\/shop\/products\/71nRcuOqbwL_1f86ceb2-a526-4c26-b71d-5e20d1379cd5.jpg?v=1629492861","width":1254}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePush-Fit Disconnect Clip Set of 1\/4\", 3\/8\", 1\/2\", 3\/4\", and 1\" Slip Fitting Removal Tools - 100% Satisfaction Guarantee (5 pack)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eINCLUDES: (1) 1\/4\" Disconnect Clip, (1) 3\/8\" Disconnect Clip, (1) 1\/2\"\nDisconnect Clip, (1) 3\/4\" Disconnect Clip, (1) 1\" Disconnect Clip, and (1)\nPush-Fit Installation Tips. More than 130 different fittings in a variety of\nsizes, all with Push Fit grip technology and no soldering, crimps, clamps,\nunions, or glue, is the push-fit connection system that's really taking hold.\nIt's the easiest way to join copper, CPVC or PEX pipe in any combination.\nShark product compatible. Just insert the pipe and the stainless steel teeth\nbite down and grip tight, while a specially formulated O-ring compresses to\ncreate a perfect seal. Disassembly is just as fast using the simple disconnect\ntool. So fittings and valves can be easily changed and reused. They can even\nbe rotated after assembly for easier installation in tight spaces. Use\nTigerBite and get a grip on your next plumbing project. These fittings are\nlead free and meet all requirements for plumbing in California and Vermont.\nColor may vary depending on manufacturer availability. Lifetime Warranty.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e*** For Copper, PEX, CPVC, HDPE, PE-RT Pipe ***\u003c\/li\u003e\n \u003cli\u003eMade in USA\u003c\/li\u003e\n \u003cli\u003eINSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.\u003c\/li\u003e\n \u003cli\u003eCOPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.\u003c\/li\u003e\n \u003cli\u003eINSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions \u0026amp; deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.\u003c\/li\u003e\n \u003cli\u003e(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.\u003c\/li\u003e\n \u003cli\u003eCERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI\/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.\u003c\/li\u003e\n \u003c\/ul\u003e"}